壳聚糖处理印染废水的研究

在不同的壳聚糖浓度、pH和温度条件下，采用分光光度法测得吸附后染料的浓度，得到了壳聚糖对染料的最佳吸附条件，结果为：壳聚糖的投入量在红3B为2％，兰2BG和黄3GE为3％时，pH8．4在碱性范围内，温度为50℃效果最佳。其结果将为壳聚糖在印染废水处理提供一定的理论基础。     

聚合硅酸硫酸铝铁的制备与应用

在n(Fe A1)／n(Si)为0．5～1．0、n(Al)／n(Fe)为2．5～3．0、SiO2质量分数为2．3％、硅酸钠溶液的活化pH为5．5、硅酸钠溶液的活化时间为12min或SiO2的质量分数为2．0％、硅酸钠溶液的活化pH为6．0、硅酸钠溶液的活化时间为3min的条件下，制备出的聚合硅酸硫酸铝铁对废水的除浊效果最佳，除浊率大于98％。     

HISTORICAL TRENDS IN SEDIMENTATION RATES AND SEDIMENT PROVENANCE,FAIRFIELD LAKE,WESTERN NORTH CAROLINA1

Sedimentation rates and sediment provenance were examined for lacustrine sediments deposited in Fairfield Lake, western North Carolina, during the past 111 years. Stratigraphic, radionuclide, and cartographic data indicate that sedimentation rates have increased several fold during the past three decades in response to localized development. The magnitude of increased sedimentation was surprising given limited development within the basin: 0.12 to 0.68 buildings/ha in 2000 in those parts directly delivering sediment to the dated cores. Thus, the analysis illustrates the potential sensitivity of watersheds in the southern Appalachians to changes in land cover. An approach that combined geochemical fingerprinting with sediment mixing models was subsequently evaluated to determine its ability to accurately estimate the contribution of sediment from (1) major bedrock formations that underlie the watershed and (2) potential sources associated with four land cover categories. Sediment sources in both analyses proved difficult to geochemically fingerprint to greater than 90 percent accuracy using data on acid‐soluble metals and selected isotopes of lead (Pb). The relative contributions of sediment from delineated sources, estimated by the mixing models, generally corresponded with known temporal and spatial patterns of land cover. However, the models were plagued by two significant problems — the chemical alteration of sediments as they were transported through upland streams to depositional sites within the lake and the loss of elemental mass. Thus, future investigations using the fingerprinting approach in this area of intense weathering, and presumably others, will need to modify the existing methods to more accurately elucidate changes in sediment provenance related to development.     

多相流中细长颗粒数值模拟研究综述

纤维干燥尾气中的飞灰含有大量的木质纤维、砂光粉和其他粉尘。从形状来看,木质纤维属细长颗粒,和研究较为成熟的球形颗粒在许多方面存在较多差异。目前,国内外学者们已对细长颗粒在多相流中的悬浮、沉降及流化方面开展了大量数值模拟研究,取得了一定的进展;在此基础上,继续完善木质纤维的运动特征、推导出其在换热器表面的碰撞沉积模型是下一步的主要工作。     

热带海洋大气环境下X70管线钢的缝隙腐蚀行为研究

目的研究X70管线钢在热带海洋大气实海环境下的缝隙腐蚀行为。方法在距离湛江东海岛海岸50m和200 m处分别搭建楔型缝隙模型,安装大气环境Cl-收集装置和自动气象监测站。结果距离海岸越近,风速越大,大气中Cl-沉降速率也越大,X70管线钢缝隙腐蚀越严重。X70管线钢在距离海岸50 m处发生缝隙腐蚀的最大缝宽约为0.96 mm,200 m处最大缝宽约为3.75 mm,50 m处缝隙腐蚀更严重。结论缝隙腐蚀区域形成了氧浓差电池,同时随着缝隙液中Cl-向缝隙内迁移,发生闭塞区电池自催化过程,在二者共同作用下,缝隙腐蚀区域较非缝隙腐蚀区域腐蚀更严重。     

活性污泥TB-EPS的絮凝特性研究:絮体的成长、破碎与再凝聚

为了解活性污泥中紧密结合胞外聚合物(tightly bound extracellular polymeric substances,TB-EPS)的絮凝特性,采用激光粒度仪在线监测技术考察了TB-EPS与高岭土生成絮体的过程以及絮体的破碎与再凝聚规律.结果表明,TB-EPS的主要组分为蛋白质和多糖聚合物,增加TB-EPS的投加量,絮体的粒径相应增大,悬浊液的剩余浊度降低.随着絮体破碎-再凝聚次数的增加,絮体的破碎因子升高而恢复因子降低,表明TB-EPS形成的絮体的强度逐渐降低,同时再凝聚的能力也逐渐降低.TB-EPS吸附高岭土的主要作用力为氢键作用,但在絮体形成过程中多糖聚合物之间的纠缠作用和蛋白质成分之间的疏水作用也可能发挥一定的作用.絮体的破碎是侵蚀和破裂同时作用的结果.     

复合生物絮凝剂CBF-1的絮凝作用机理研究

采取PAC+絮凝剂的复配方式开展高岭土悬浊液烧杯实验,考察了复合生物絮凝剂CBF-1、CBF-1溶解物及微生物絮凝剂MBF8的絮凝特性,并借助iPDA仪分析和扫描电镜、光学显微镜观察等手段,比较分析了絮凝过程及絮体特性的差异.结果表明,各复配絮凝的浊度去除效果排序为CBF-1＞ CBF-1溶解物＞MBF8,CBF-1投加量1 mg·L-1时,浊度去除率可达到97.5％;絮体强度排序为CBF-1＞ CBF-1溶解物＞MBF8,絮体恢复因子排序为MBF8＞CBF-1溶解物＞CBF-1,絮体大小排序为CBF-1＞ CBF-1溶解物＞MBF8.单独投加PAC或投加PAC+MBF8的情况下,形成的絮体形态相对规整、密实;投加PAC+ CBF-1溶解物或投加PAC+ CBF-1形成的絮体则相对无序、疏松,CBF-1作用下絮体大、沉降快.CBF-1中高电荷MBF8组分及大分子羧甲基纤维素、羧甲基多聚糖等组分具有强的电荷中和与桥联协同增效作用;CBF-1还含有纤维素、木质素等大分子量且带多种官能团的不溶性组分,在桥联和吸附过程中也起着重要作用.     

改性壳聚糖CAD与微生物絮凝剂MBF8复配絮凝研究

采用水溶液自由基聚合反应,将丙烯酰胺(AM)、二甲基二烯丙基氯化铵(DMDAAC)接枝到壳聚糖分子上制成了阳离子改性壳聚糖(CAD).经FT-IR、XRD、zeta(ξ)电位、凝胶色谱等分析确定,CAD为淡黄色透明液体,pH值为3.7,相对分子质量为2.88×10⁶,阳离子度为16.7,等电点(0.1%溶液)约为pH值10.5,有效成分2.6%,主要特征官能团有羟基、氨基、季铵基和酰胺基, 呈不规则晶体结构.将CAD与相对分子质量3.67×10⁵的多糖类电负性微生物絮凝剂MBF8复配,对浊度12~460 NTU、离子强度3.0 mmol·L^-1的高岭土悬浊液进行烧杯实验.结果表明,MBF8与CAD的最佳使用方式为先投加MBF8后投加CAD,复配比5:3时效果最好,适用的pH范围为6.0~10.0.采用PAC(3.0 mg·L^-1)+MBF8+CAD(1.0 mg·L^-1)复配絮凝,pH=8.0下,对浊度为110 NTU的高岭土悬浊液,浊度去除率>97%,残余铝<0.08 mg·L^-1,絮体大、沉降快,絮凝效果优于PAC+分子量800万、1200万的阴离子PAM及分子量1500万的阳离子PAM.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

重金属絮凝剂PEX对水中铅的去除性能研究

在合成高分子重金属絮凝剂聚乙烯亚胺基黄原酸钠(PEX)的基础上,研究了该絮凝剂处理含铅离子废水的效能,并对一些影响因素进行了考查。研究结果表明:高分子重金属絮凝剂PEX对铅离子的捕集效率较高,去除率可达90%以上;pH值对PEX去除铅离子有一定的影响,pH=5.0时去除效果最好;Mg2+﹑Ca2+、EDTA、柠檬酸、焦磷酸钠以及致浊物质的存在均能促进铅离子的去除;絮体残渣稳定性好,金属离子易回收,回收率可达到70.0%。