气体质量流量控制器在汽车VOC检测领域的应用

汽车挥发性有机物组分(VOC)检测过程中,充气和采气体积的计量对检测结果的影响尤为突出.通过气体质量流量控制器与目前VOC检测中常用的恒流气体采样装置的比较,表明在同样满足VOC检测标准要求的情况下,气体质量流量控制器在排除环境干扰等方面体现出更好的稳定性,更有利于汽车VOC检测准确度的提高.     

电子电器生产企业物料流动分析方法研究

有效地控制电子企业环境污染,提高资源的利用率,回收有价值的资源,是电子企业的必然选择。建立了以物质守恒定律为依据的物料流动平衡分析式和平衡图,提出了物料平衡对象的选择,研究了物料流动分析方法,确定数据获取的方法与边界,阐述了提高生产效率、降低物耗和能耗、回收资源的解决方案。     

Estimation of Daily Streamflow of Southeastern Coastal Plain Watersheds by Combining Estimated Magnitude and Sequence

Commonly used methods to predict streamflow at ungauged watersheds implicitly predict streamflow magnitude and temporal sequence concurrently. An alternative approach that has not been fully explored is the conceptualization of streamflow as a composite of two separable components of magnitude and sequence, where each component is estimated separately and then combined. Magnitude is modeled using the flow duration curve (FDC), whereas sequence is modeled by transferring streamflow sequence of gauged watershed(s). This study tests the applicability of the approach on watersheds ranging in size from about 25‐7,226 km² in Southeastern Coastal Plain (U.S.) with substantial surface storage of wetlands. A 19‐point regionalized FDC is developed to estimate streamflow magnitude using the three most selected variables (drainage area, hydrologic soil index, and maximum 24‐h precipitation with a recurrence interval of 100 years) by a greedy‐heuristic search process. The results of validation on four watersheds (Trent River, North Carolina: 02092500; Satilla River, Georgia: 02226500; Black River, South Carolina: 02136000; and Coosawhatchie River, South Carolina: 02176500) yielded Nash‐Sutcliffe efficiency values of 0.86‐0.98 for the predicted magnitude and 0.09‐0.84 for the predicted daily streamflow over a simulation period of 1960‐2010. The prediction accuracy of the method on two headwater watersheds at Santee Experimental Forest in coastal South Carolina was weak, but comparable to simulations by MIKE‐SHE.     

Modeling of Fluid Flow and Heat Transfer in a Copper Based Heat Sink Application

With the trend towards increasing the speed of processors in smaller sized of computers, there has been considerable interest in heat sink technologies with higher levels of performance and further miniaturization. This work addresses the fundamental heat transfer augmentation question of how to design a copper-based heat sink, when the overall dimensions of the bottom plate or fan are specified. A three-dimensional finite-volume model has been developed and applied to investigate flow and conjugate heat transfer in the copper-based heat sink. The model was produced with the commercial program FLUENT, which allows this nonlinear, highly turbulent problem to be simulated using the k-ε turbulence model. The theoretical model developed is validated by comparing the model predictions with available experimental data. The thermal performance and temperature distribution for the heat sink were analyzed and a procedure for optimizing the geometrical design parameters based on less space occupation and more efficient heat transfer coefficient is presented. Several design examples with different types of cooling methods and manufacturing processes have been analyzed. The reliability and effectiveness in heat spreading of those has been compared. It has been shown that the copper-based heat sink with louvered fins (case No.3) has an optimum design configuration.     

聚结除油反应机理及其动力学分析

通过对几种聚结填料除油性能的对比试验，探讨分析了聚结除油反应机理及其动力学。结果表明，填料的空间构成形式对聚结除油效率有重要影响，当润湿聚结机理和碰撞聚结机理同时存在时，聚结效率可得到大幅度提高。当油珠颗粒尺寸超过10μm时，布朗运动聚结速率急剧减慢，而湍流的聚结速率急剧加快。聚结除油反应器内水力条件的紊动程度达到C≥500—700s^-1时，油珠颗粒的聚结速率和效率将得到大幅度提高。     

REGIONAL APPLICATION OF AN APPROXIMATE STREAMFLOW PARTITIONING METHOD1

ABSTRACT: The approximate streamflow partitioning method which uses daily rainfall and streamfiow data was applied in Coastal Plain, Coastal Flatwoods, and Southern Piedmont physiographic regions for estimation of the surface and subsurface flow components of total streainflow. Sizes of the watersheds ranged from 9.6 km² to 1,030 km. Although the streamflow partitioning method was developed and tested on the Coastal Plain physiographic region, results indicate that the procedure can be applied to other physiographic regions where available data are limited to daily values. The effect of channelization on the partitioned flow components in the Coastal Plain and Coastal Flatwoods physiographic areas was also examined. While channelization was found to decrease the storm-time base, it had no significant effect on the relative percentages of the partitioned flow components.     

MANAGEMENT OF BASEFLOW AUGMENTATION: A REVIEW1

ABSTRACT: Baseflow augmentation refers to the temporary storage of subsurface water in floodplains, streambanks, and/or stream bottoms during the wet season, either by natural or artificial means, for later release during the dry season to increase the magnitude and permanence of low flows. Management strategies for baseflow augmentation fall into the following categories: (1) range management, (2) upland vegetation management, (3) riparian vegetation management, (4) upland runoff detention and retention, and (5) the use of instream structures. The benefits of a management strategy focused on baseflow augmentation are many, including: (1) increased summer flows, (2) healthier riparian areas, (3) increased channel and bank stability, (4) decreased erosion and sediment transport, (5) improved water quality, (6) enhanced fish and wildlife habitat, (7) lower stream temperatures, and (8) improved stream aesthetics. This review has shown that baseflow augmentation has been successfully accomplished in a few documented cases. Given its clear impact on soil and water conservation, particularly in the semiarid western U.S., it appears that baseflow augmentation is a concept whose time has come. Research is needed on how to successfully integrate baseflow augmentation within comprehensive resource management strategies.     

The State of Protected Forest Communities in the European Forest–Steppe Zone of Russia and Prospects for Their Reconstruction: A Case Study of Specially Protected Areas of Penza Oblast

The structure of most forest communities in the European forest–steppe, including protected areas, has been disturbed. The adverse consequences of these disturbances include the incomplete age structure of the populations of cenosis-forming species and the irreversibility of successions. The conservation of biodiversity in the structurally disturbed communities is impossible without human intervention, which must be aimed at restoring their age heterogeneity with regard to their specific ecological features.     

山东河川径流可持续利用探讨

本文通过对山东河川径流的深入分析研究 ,深刻剖析了它的特点极其时空分布规律 ,阐述其可持续开发利用应考虑的主要因素、开发措施及解决山东缺水问题的根本出路 ,以便科学合理地开发利用有限的水资源 ,解决山东的供水危机