污染土壤淋洗修复技术研究进展

本文介绍了淋洗修复技术和淋洗装置在污染土壤修复技术中的应用,对有机物、重金属及放射性核素污染土壤淋洗修复技术的应用现状进行了总结和评价,还探讨了淋洗修复技术的发展方向及其应用前景。     

CAUSES OF PEAK FLOWS IN NORTHWESTERN MONTANA AND NORTHEASTERN IDAHO1

ABSTRACT: Both catchment experiments and a review of hydrologic processes suggest a varying effect of forest harvest on the magnitude of peak flows according to the cause of those peak flows. In northwestern Montana and Northeastern Idaho, annual maximum flows can result from spring snowmelt, rain, mid-winter rain-on-snow, or rain-on-spring-snowmelt. Meteorologic and physical data were used to determine the cause of annual maximum flows in six basins which had the necessary data and were smaller than 150 mi². Rain-on-spring-snowmelt was the most frequent cause of annual maximum flows in all six basins, although there was a strong gradient in the magnitude and cause of peak flows from southwest to northeast. Less frequent mid-winter rain-on-snow events caused the largest flows on record in four basins. Mid-winter rain-on-snow should be distinguished from rain-on-spring-snowmelt because of differences in seasonal timing, the relative contributions of rain vs. snowmelt, and the projected effects of forest harvest. The effects of mixed flood populations on the flood-frequency curve varied from basin to basin. Annual maximum daily flows could not be reliably predicted from rainfall and snowmelt data.     

A Biosurfactant-Enhanced Soil Flushing for the Removal of Phenanthrene and Diesel in Sand

In order to examine the potential of biosurfactants in soil remediation, and to investigate the effects of several operating conditions, such as flow rate, biosurfactant concentration and surfactant type, biosurfactant-enhanced soil flushing was conducted. In the biosurfactant-enhanced soil flushing process, the removal efficiency increased as the flow rate decreased. Rhamnolipid showed no effect on the removal efficiency of phenanthrene and diesel from sand in the concentration range 0.3-0.5%. However, rhamnolipid showed higher efficiencies for the removal of phenanthrene and diesel from sand than Tween 80. Based on total recovery, following an equivalent pore volume flush, it was more difficult to remove diesel than phenanthrene. In order to obtain the specific removal efficiency, more pore volumes of surfactant solution may be required in field applications. Under optimum conditions, the biosurfactant removed as much as 70% of the phenanthrene and 60% of the diesel in the sand. These results indicate that the use of biosurfactants in the flushing process is favorable, not only with respect to the environment, but also on removal efficiencies.     

INSTANTANEOUS PEAK FLOW ESTIMATION PROCEDURES FOR NEWFOUNDLAND STREAMS1

ABSTRACT: A procedure of estimating instantaneous flood flows for various return periods on the Island of Newfoundland is presented. The procedure is based on annual maximum instantaneous flows rather than annual maximum daily-mean flows, as the latter requires the conversion of estimated daily-mean flows into instantaneous flows. Regression equations were developed for each of three homogeneous regions for the desired return periods. The flood flow estimation capability of the presented procedure is demonstrated to be better than any other currently available procedure on the Island.     

VEGETATION INFLUENCE ON SMALL STREAM SILTATION1

ABSTRACT: A meandering stream channel was simulated in the Hydraulics Laboratory at Colorado State University and a series of tests was conducted using four types of vegetation to evaluate the potential effects of vegetation on sediment deposition and retention in a stream channel. The data collected included average flow velocity, flow depth, length of vegetation, density of vegetation, cross-sectional area of the vegetative stem, wetted perimeter of the vegetative stem, and injection and flushing time. The findings indicated that the vegetation could retain from 30 to 70 percent of the deposited sediments. The ability of vegetation to entrap and retain sediment is related to the length and cross-sectional area of the vegetation. The variables describing the flow and the vegetative properties were combined to form a predictive parameter, the sedimentation factor (S_d) that can be compared with the amount of sediment entrapped by vegetation in a stream system. A relation was developed correlating vegetation length to sediment retention after flushing for flexibility and rigid vegetation.     

ASSESSING FLUSHING-FLOW REQUIREMENTS FOR BROWN TROUT SPAWNING GRAVELS IN STEEP STREAMS1

Flushing flows are re1eses from dams designed to remove fine sediment from downstream spawning habitat. We evaluated flushing flows on reaches proposed for hydroelectric diversions on seven streams in the eastern Sierra Nevada, California, with wild populations of brown trout (Salmo trutta). The stream reaches are steep (average map slopes range from 7 to 17 percent), are dominated by boulder cascades, and afford few opportunities for gravel deposition. Methods for estimating flushing flows from flow records, developed from studies in other localities, produced widely differing results when applied to the study streams, probably reflecting differences in the hydrologic and geomorphic characteristics of the streams on which the methods were developed. Tracer gravel experiments demonstrated that all sampled gravels were washed out by the flows of 1986, a wet year. Size analyses of gravel samples and hydraulic data from field surveys were used in tractive-force calculations in an attempt to specify the flow required to flush the gravels. However, these calculations produced some unrealistic results because the flows were nonuniform in the study reaches. This suggests that the tractive-force approach may not be generally applicable to small, steep streams where nonuniform flow conditions prevail.     

Removal of arsenic in tailings by soil flushing and the remediation process monitoring

In order to investigate the optimum conditions for the application of soil flushing of arsenic, a batch test was carried out using EDTA at various concentration and pH levels. Based on the optimum condition derived from the batch test, a column test was conducted to examine the feasibility of the soil-flushing technology under field-equivalent conditions. In this column test, a low flushing solution flow rate showed a significantly higher As removal efficiency (71.6%) than a high flow rate (56.3%). TCLP (toxicity characteristic leaching procedure) and a seed germination test were carried out to monitor the toxicity both during and after the treatment. The finally treated tailings were shown to be significantly remediated, having a reduced toxicity by both the TCLP and seed germination tests.     

考虑串孔影响的穿层水力扩孔合理冲煤量研究

在煤层增透方面,穿层水力扩孔冲出煤量主要依据经验以及遵循“能冲尽冲”的原则,致使串孔现象严重,针对这一问题,采用理论分析、数值模拟结合工程试验的方法,阐明了串孔致因机理和串孔前后扩孔孔硐内负压损失分布特征,构建了考虑吸附膨胀应力和Klinkenberg效应的扩孔孔硐附近煤体瓦斯流动流-固耦合数学模型,利用Comsol软件,模拟了不同冲煤量下扩孔孔硐附近煤体所受应力分布和煤体渗透率的变化情况。研究结果表明:随着煤体不断被冲出,孔硐有效抽采半径相对变化率呈现衰减趋势;扩孔孔硐附近最大主应力呈现先急剧减小再增大,然后降低直至原始应力大小的趋势;渗透率的变化趋势与最大主应力恰好相反;扩孔孔硐周围煤体渗透率的增加主要受煤体的径向位移所控制,孔硐周围煤体大幅径向位移会产生串孔现象,渗透率虽得到大幅度提高,但瓦斯抽采效果和安全采掘很难保证,需要厘定出水力扩孔合理冲出煤量。