Sensitivity analysis of a parameterization of the stomatal component of the DO3SE model for Quercus ilex to estimate ozone fluxes

A sensitivity analysis of a proposed parameterization of the stomatal conductance (g(s)) module of the European ozone deposition model (DO(3)SE) for Quercus ilex was performed. The performance of the model was tested against measured g(s) in the field at three sites in Spain. The best fit of the model was found for those sites, or during those periods, facing no or mild stress conditions, but a worse performance was found under severe drought or temperature stress, mostly occurring at continental sites. The best performance was obtained when both f(phen) and f(SWP) were included. A local parameterization accounting for the lower temperatures recorded in winter and the higher water shortage at the continental sites resulted in a better performance of the model. The overall results indicate that two different parameterizations of the model are needed, one for marine-influenced sites and another one for continental sites.     

Images of war: using satellite images for human rights monitoring in Turkish Kurdistan

In areas of war and armed conflict it is difficult to get trustworthy and coherent information. Civil society and human rights groups often face problems of dealing with fragmented witness reports, disinformation of war propaganda, and difficult direct access to these areas. Turkish Kurdistan was used as a case study of armed conflict to evaluate the potential use of satellite images for verification of witness reports collected by human rights groups. The Turkish army was reported to be burning forests, fields and villages as a strategy in the conflict against guerrilla uprising. This paper concludes that satellite images are useful to validate witness reports of forest fires. Even though the use of this technology for human rights groups will depend on some feasibility factors such as prices, access and expertise, the images proved to be key for analysis of spatial aspects of conflict and valuable for reconstructing a more trustworthy picture.     

Types of Ectomycorrhiza of Mature Beech and Spruce at Ozone-Fumigated and Control Forest Plots

In the Kranzberg forest near Freising (Germany) a novel “Free-Air Canopy O₃ Exposure” system has been employed for analysing O₃-induced responses from sub-cellular to ecosystem levels that are relevant for carbon balance and CO₂ demand of 60-year-old beech trees. The below-ground ectomycorrhizal community was studied in two-fold ambient O₃ concentrations (five cores per sampling) and in a control plot with an ambient O₃ concentration (four cores per sampling). Five samplings were taken throughout two vegetation seasons (2003 and 2004). Types of ectomycorrhiza were determined by their morphological, anatomical and molecular characteristics and quantified by counting. The total number of mycorrhizal fine roots was higher at the fumigated plot as compared with the control site. The numbers of ectomycorrhizal types at the fumigated and control plots were 28 and 26, respectively. Cenococcum geophilum was present in all soil cores at all sampling times with a significant increase in abundance under ozone-fumigated trees. Other mycorrhizal types present at higher abundance at the fumigated than at the control plot were identified as Russula densiflora, R. fellea, R. illota, Tuber puberulum, Lactarius sp. 2 and Russula sp. 2. Some mycorrhizal types were present exclusively at the fumigated plot (Fagirhiza fusca, F. setifera, Lactarius acris, Piceirhiza nigra and Russula sp. 1). A possible ecological role for the abundant types of ectomycorrhiza and their putative application in bio-indication is discussed.     

Ecological risk and accessibility analysis to assess the impact of roads under Habitats Directive

We propose a method for the appropriate assessment of adverse effects of roads in compliance with the European Union Habitats Directive. The method incorporates an analysis of ecological risk of edge effects by the proposed roads with the related increase in accessibility. The method was tested on 30 km of planned forest roads inside an 8,000-ha reserve included in two Natura 2000 sites. As a result, the cumulative effect of 19 road segments was judged as not significantly affecting the integrity of the sites, although they made accessible an extra 314 ha. On the basis of the accessibility calculation, 20 ha of land were set aside from forest exploitation as a mandatory mitigation measure. The method objectively determined the cumulative adverse effects, enabled comparison of plan revisions and alternatives and proved to measure direct and indirect significant effects with a realistic effort in terms of field survey and geographic information system processing.     

Optimal Reorganization of NASA Earth Science Data for Enhanced Accessibility and Usability for the Hydrology Community

A long‐standing “Digital Divide” in data representation exists between the preferred way of data access by the hydrology community and the common way of data archival by earth science data centers. Typically, in hydrology, earth surface features are expressed as discrete spatial objects (e.g., watersheds), and time‐varying data are contained in associated time series. Data in earth science archives, although stored as discrete values (of satellite swath pixels or geographical grids), represent continuous spatial fields, one file per time step. This Divide has been an obstacle, specifically, between the Consortium of Universities for the Advancement of Hydrologic Science, Inc. and NASA earth science data systems. In essence, the way data are archived is conceptually orthogonal to the desired method of access. Our recent work has shown an optimal method of bridging the Divide, by enabling operational access to long‐time series (e.g., 36 years of hourly data) of selected NASA datasets. These time series, which we have termed “data rods,” are pre‐generated or generated on‐the‐fly. This optimal solution was arrived at after extensive investigations of various approaches, including one based on “data curtains.” The on‐the‐fly generation of data rods uses “data cubes,” NASA Giovanni, and parallel processing. The optimal reorganization of NASA earth science data has significantly enhanced the access to and use of the data for the hydrology user community.     

Supporting Diverse Data Providers in the Open Water Data Initiative: Communicating Water Data Quality and Fitness of Use

Shared, trusted, timely data are essential elements for the cooperation needed to optimize economic, ecologic, and public safety concerns related to water. The Open Water Data Initiative (OWDI) will provide a fully scalable platform that can support a wide variety of data from many diverse providers. Many of these will be larger, well‐established, and trusted agencies with a history of providing well‐documented, standardized, and archive‐ready products. However, some potential partners may be smaller, distributed, and relatively unknown or untested as data providers. The data these partners will provide are valuable and can be used to fill in many data gaps, but can also be variable in quality or supplied in nonstandardized formats. They may also reflect the smaller partners' variable budgets and missions, be intermittent, or of unknown provenance. A challenge for the OWDI will be to convey the quality and the contextual “fitness” of data from providers other than the most trusted brands. This article reviews past and current methods for documenting data quality. Three case studies are provided that describe processes and pathways for effective data‐sharing and publication initiatives. They also illustrate how partners may work together to find a metadata reporting threshold that encourages participation while maintaining high data integrity. And lastly, potential governance is proposed that may assist smaller partners with short‐ and long‐term participation in the OWDI.     

Testing and Improving Temperature Thresholds for Snow and Rain Prediction in the Western United States

The phase of precipitation at the land surface is critical to determine the timing and amount of water available for hydrological and ecological systems. However, there are few techniques to directly observe the precipitation phase and many prediction tools apply a single temperature threshold (e.g., 0°C) to determine phase. In this paper, we asked two questions: (1) what is the accuracy of default and station optimized daily temperature thresholds for predicting precipitation phase and (2) what are the regions and conditions in which typical temperature‐based precipitation phase predictions are most suited. We developed a ground truth dataset of rain vs. snow using an expert decision‐making system based on precipitation, snow depth, and snow water equivalent observations. This dataset was used to evaluate the accuracy of three temperature‐threshold‐based techniques of phase classification. Optimizing the temperature threshold improved the prediction of precipitation phase by 34% compared to using 0°C threshold. Developing a temperature threshold based on station elevation improved the error by 12% compared with using the 0°C temperature threshold. We also found the probability of snow as a function of temperature differed among ecoregions, which suggests a varied response to future climate change. These results highlight a current weakness in our ability to predict the effects of regional warming that could have uneven impacts on water and ecological resources.     

复合链式结构下中国林业碳库系统测度模型构建

温室气体上升导致的全球气候变暖问题不容忽视,增加森林碳汇和木质林产品碳储是缓解温室效应的有效途径。根据森林碳汇功能与林产品碳储功能的关联理论与模型,推导和改进包括森林子碳库、土壤子碳库及木质林产品子碳库在内的林业碳库核算模型及方法,以实现目标碳从森林碳库向木质林产品碳库的过渡与转移。基于气候变化背景下森林-林产品产业链的发展现状,构建包括森林子碳库和林产品子碳库的复合一体化林业碳库模型,使之为中国林业碳库的计量与评价提供判据。首先,对包含森林子碳库和木质林产品子碳库在内的世界林业碳库的发展现状进行探讨,归纳和比较国内外主流的关联林业碳库评估方法模型,从而对中国林业碳库模型的构建提供理论背景支持和逻辑方法支撑。其次,分析现有中国林业碳库评估存在的优势和弊端,找出适合中国林业特点的国家碳库创新评估路径,运用政府间气候变化专门委员会指定的生产法的思路,通过分析目标碳在林产品产业链生产、加工等过程中的流入和支出,提出创新中国林业碳库的模型构想并对其系统内涵进行分析。最后,赋予中国林业碳库系统模型数学表达,分析其数理结构并进行逻辑演绎,在森林子碳库和木质林产品子碳库两个复合链式体系下构建中国林业碳库系统测度模型(ForestProducts Carbon Model/FPCM)。     

庐山不同森林植被类型土壤特性及其健康评价

土壤作为森林生态系统的一个重要因子,评价森林土壤健康状况对森林健康的维护经营以及森林系统功能的发挥具有重要意义。在系统调查和分析庐山8种森林植被类型土壤特性的基础上,评价指标分别从物种多样性以及不同的森林土壤特性中进行筛选,包括物种多样性系数、枯落物层厚度、腐殖质层厚度、土层厚度、容重、粘粒含量、有机质、p H值、阳离子交换量、全氮、水解氮、有效磷、速效钾、磷酸酶活性等指标,基于SPSS19.0软件对所获得数据进行差异性检验和相关分析,确定各项指标的权重,应用合适的土壤健康评分函数,将测得的指标值转换为对应指标的分值,最后通过加权综合法,计算其土壤健康指数,并对不同森林植被类型土壤健康状况进行评价。结果表明,8种森林植被类型下最终的土壤健康指数大小排序为:针阔混交林(0.78)常-落混交林(0.72)灌丛(0.69)常绿阔叶林(0.67)落叶阔叶林(0.64)竹林(0.59)马尾松林(0.53)黄山松林(0.46)。     

酸雨作用下中亚带森林冠层淋溶规律研究

2001年1月～2002年6月对韶山亚热带常绿阔叶林4个采样区进行了酸雨的监测,以监测数据为依据,分析研究了林内穿透水中主要离子的淋溶规律。结果表明:大气降水经过森林冠层后pH值明显升高,韶山亚热带常绿阔叶林对SO42-、NO3-、Mg2+、NH4+离子具有吸收作用,特别是NH4+和NO3-离子。SO42-、Ca2+和Mg2+离子的冠层淋溶百分率随降雨量的增加有明显减少的趋势。Ca2+、K+和Cl-随着pH的增加,其冠层淋溶百分率呈增加趋势。韶山地区在常年酸沉降作用下,森林冠层对酸性离子SO42-、NO3-的吸收作用最强。根据18个月离子浓度平均值来计算,韶山地区森林冠层离子的淋溶序列为:K+>Ca2+>Cl->Mg2+>SO42->NO3->NH4+>Na+。