The Real-World Safety Potential of Connected Vehicle Technology

Objective: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes.

Method: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing “replay” of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking.

Results: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn–opposite crashes.

Conclusions: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.     

基于可靠性理论的事件树分析方法研究

事件树分析过程中事件树的编制和分析方法缺乏系统性,导致实际运用中事件树的编制缺乏可操作性。从目标系统的选择、环节事件逻辑关系的确定、定量分析中基本数据的来源和确定方法等三个问题进行了系统研究,并以可靠性的相关理论为基础,提出"从控制和影响初始事件发展演化的角度,调查分析对初始事件做出响应的安全功能,按系统工作原理对目标系统进行重构,构建目标系统的功能结构图,画出系统的可靠性框图"入手,对"传统的事件树绘制程序"进行修正,解决了事件树分析过程中目标系统的选择、环节事件逻辑关系的确定以及定量分析基本数据的确定方法等问题。修正后的方案对实现事件树的正确编制和系统分析逻辑更清晰,操作指导性更强。     

Framing an independent,integrated and evidence-based evaluation of the state of Australia's biophysical and human environments

A new approach was developed for Australia's 2011 national State of the Environment (SoE) report to integrate the assessment of biophysical and human elements of the environment. A Common Assessment and Reporting Framework (CARF) guided design and implementation, responding to jurisdictional complexity, outstanding natural diversity and ecosystem values, high levels of cultural and heritage diversity, and a paucity of national-scale data. The CARF provided a transparent response to the need for an independent, robust and evidence-based national SoE report. We conclude that this framework will be effective for subsequent national SoE assessments and other integrated national-scale assessments in data-poor regions.     

平台信息系统批量生产管理研究

平台信息系统的批生产管理以往未受到足够的重视,分析了现行的批生产管理体系问题,从文件管理、质量和可靠性保障、工艺管理、组织管理和技术状态控制四个方面详细阐述了如何进行平台信息系统的批生产管理。     

连续型空间故障树中因素重要度分布的定义与认知

为了解工作环境条件因素对系统故障概率的影响的特征,同时丰富连续型空间故障树(CSFT)的理论框架,提出因素重要度分布的概念。因素重要度分布从经典故障树的概率重要度发展而来,目的是研究系统所处环境因素变化导致系统可靠性变化的程度。给出元件和系统的因素重要度分布概念、公式及所需基础数据,并分析因素重要度分布的正负分布特点。使用该概念研究元件X1和系统T的因素t重要度分布和因素c重要度分布。结果表明:在不同环境中,对于因素t或c变化影响元件或系统的故障概率变化程度是不同的。因素重要度分布有效地表达了t和c对元件或系统的故障概率影响特征。     

航天器总装事故原因事件重要度分析

为解决传统安全性定量分析方法不能描述航天器总装这一复杂人-机-环系统的失效数据波动性和非严格逻辑关系的问题,结合生产实际,采用问卷调查的方法找出影响总装事故的风险因素,即导致事故的事件发生可能性、输入事件对输出事件的影响程度等。在验证调查数据的有效性之后,应用基于模糊数的模糊因果图(FCD),计算某航天器与支架车连接作业的事故风险可能性。提出原因事件重要度的计算方法。通过计算发现,人员注意力和发动机保护罩作用是导致发动机损伤的关键事件。与模糊事故树(FFT)、贝叶斯网络(BN)重要度计算结果对比表明,模糊重要度计算结果能反映事故发生可能性对原因事件发生可能性值的增减的敏感度。     

二氧化碳灭火系统扑灭风电机组舱内火灾试验研究

为有效遏制全国多地风力发电机组火灾事故的势头,基于灭火系统在风电机组防火设计中的重要性,提出采用二氧化碳灭火系统对风电机舱进行灭火保护的解决方案。在建造国内首台风电机组火灾模拟试验装置的基础上,通过试验研究二氧化碳灭火系统在常温状态和低温状态下对风电机组火灾的灭火能力。结果表明,该灭火系统能够对风力发电机组进行全淹没灭火保护,适用于空间狭小且结构复杂的风电机舱;在低温条件下,其喷放时间和灭火时间虽比常温状态下长,但灭火效能并未降低。     

高速公路安全水平仿真分析

为深入研究高速公路安全系统,用系统动力学(SD)方法分析驾驶员、车辆、道路、应急救援等组成要素以及环境、管理等影响因素之间的关系,建立高速公路安全系统因果关系模型和存量流量模型。用层次分析法(AHP)确定各影响因素的权重。以三福高速公路为例,用Vensim软件模拟高速公路运营期间系统安全的变化情况。结果表明,在该高速公路运营期间,系统安全与车辆安全度呈先上升后下降的趋势、道路安全度呈下降趋势、驾驶员安全度与应急救援能力呈上升趋势。通过与实际数据对比,验证了模型的有效性。     

地铁运营突发事件应急响应模式的马尔科夫链分析

为研究城市轨道交通网络化运营线路的风险传导规律和耦合关系,构建基于随机Petri网的同构马尔科夫链模型。通过模型分析突发事件应急响应模式中线路之间的相互影响,以及各线路启动突发事件应急响应模式对整个系统稳态的影响。结果表明,用该模型可从数学上研究城市轨道交通运营线路之间的传导规律和耦合关系,找出影响整个应急指挥系统效率的关键因素,最终提高地铁应对突发事件的能力。     

An easy method to design gas/vapor relief system with rupture disk

Tank discharge gas/vapor flow problems are frequently encountered in both practice and design. To perform this type of design calculation, the first step is to identify whether the flow is choked or not through a trial-and-error solution of an equation for adiabatic flow with friction from a reservoir through a pipe. Developing a direct method without any trial-and-error to identify a choking condition would be helpful for expediting the flow calculations. This paper presents an easy and quick method to identify the choking of gas flow for an emergency relief system consisting of a rupture disk and vent piping. This greatly simplifies the design calculations. The proposed method for validating the venting adequacy of existing ERS circumvents the iteration calculation and the use of Lapple charts. Three case studies for the design of vent piping for rupture disks support the proposed method.