大庆聚驱后油藏内源微生物群落结构解析与分布特征研究

利用变性梯度凝胶电泳(denaturing gradient gel electrophoresis,DGGE)技术和主成分分析法(principal component analysis,PCA)解析了大庆油田聚驱后油藏的细菌和古菌群落结构组成及分布特征.结果表明,注水井中的细菌主要以好氧的假单胞菌属和不动杆菌属为主,注水井近井地带以兼性厌氧的肠杆菌属为主,各采油井中的细菌则包括陶厄氏菌属、梭菌纲、假单胞菌属、油杆菌属及大量的未培养细菌;各注水井及注水井近井地带检测到的古菌主要是乙酸型产甲烷的甲烷鬃菌,各采油井中古菌则以甲烷微菌属、甲烷螺菌属及甲烷杆菌属等为主.总体上,该聚驱区块从注水井到采油井,细菌优势菌群依次呈好氧细菌-兼性厌氧细菌-严格厌氧细菌分布;古菌的分布受环境因素及微生物代谢产物影响,注水井和采油井中的优势菌群差异显著.     

Fe(Ⅲ)对海藻酸钙凝胶层过滤特性的影响

为考察饮用水处理膜工艺中Fe(Ⅲ)对多糖污染层过滤特性的影响,本研究以海藻酸钠为模型多糖污染物,分析海藻酸钙在有Fe(Ⅲ)及无Fe(Ⅲ)存在时形成污染层的过滤特性,并用压缩性方程及渗透性方程对凝胶层的过滤特性进行定量描述.研究结果表明,Ca2+的存在会使海藻酸钠分子间结合,形成内部结合紧密的凝胶层,产生较大的过滤阻力;往海藻酸钙溶液中进一步加入Fe(Ⅲ)后,由于可溶性Fe(Ⅲ)较易水解,加入Fe Cl3后溶液中铁离子和铁的氧化物/氢氧化物颗粒同时存在,少量Fe(Ⅲ)对海藻酸钙凝胶层的过滤特性影响不大,较多量Fe(Ⅲ)会形成铁的氧化物/氢氧化物颗粒,一定程度上改变了凝胶层的结构,使过滤性能变好.     

Novel synthesis of aluminum hydroxide gel-coated nano zero-valent iron and studies of its activity in flocculation-enhanced removal of tetracycline

A newly designed aluminum hydroxide gel-coated nanoscale zero-valent iron(AHG@NZVI)with enhanced activity and dispersibility of NZVI was successfully synthesized.The AHG@NZVI composite was synthesized via control of the surface AHG content.AHG@NZVI-1,AHG@NZVI-2 and AHG@NZVI-3 were prepared under centrifugal mixing speeds of 1000,2000 and 4000 r/min,respectively.The activity of AHG@NZVI was evaluated by its tetracycline(TC) removal efficiency.The effects of AHG content,pH value,reaction temperatu...     

断路器欠压脱扣器抗冲击设计

主要应用于舰船等有冲击场合的断路器，其抗冲击性能要求很高。介绍了断路器欠压脱扣器在抗冲击方面的设计方法，此方法可以有效地削弱冲击力对欠压脱扣器的影响。     

成组生物毒性测试法综合评价典型工业废水毒性

为了更加准确地评估典型工业废水的综合生物毒性以及处理工艺对废水毒性的削减情况,采用发光细菌急性毒性实验、大型溞急性毒性实验和单细胞凝胶电泳实验,结合潜在生态毒性效应探测(potential ecotoxic effects probe,PEEP)指数对常州市7种典型工业废水的综合生物毒性进行了评价。结果表明,7种工业原水都表现出了急性毒性或遗传毒性,综合生物毒性强度的排序为电子厂>电镀厂>综合污水处理厂>印染厂>化工厂>食品厂>制药厂。而7种工业废水的处理后出水综合生物毒性强度的排序为印染厂>化工厂>电子厂>综合污水处理厂>食品厂>制药厂>电镀厂。其中,印染和化工厂出水综合生物毒性高于原水,分别增加了43.3%和38.7%,PEEP评价结果显示分别属于剧毒和高毒,而电镀、电子、综合污水处理和食品厂出水的综合生物毒性削减明显,分别比原水削减了76.9%、53.1%、48.3%和26.6%,PEEP结果表明基本无毒。建立在成组生物毒性实验基础上的PEEP评价方法可全面反映工业废水的综合生物毒性,进而更客观地评价废水对水生态系统乃至人类健康的潜在影响。     

压裂返排液循环使用技术综述

综述了传统处理方法和深度处理方法两大类压裂返排液处理方法的特点和处理效率。介绍了对氧化破胶的压裂返排液和非氧化破胶的压裂返排液进行处理的方法和机理,以及返排液循环使用效果和性能检测的标准。指出研发含有高分子聚合物稠化剂的返排液循环使用工艺、高效便捷的压裂返排液循环使用工艺和新型可循环使用的压裂液体系等将是未来压裂返排液循环使用的发展方向。     

The biodegradation of blends of polycaprolactone and polyethylene exposed to a defined consortium of fungi

Polycaprolactone, polyethylene, and blends of polycaprolactone and polyethylene—in which the portion of polycaprolactone was 80 and 10%—were exposed for periods of from 1 to 16 weeks to a consortium of five fungi in a nutrient salt medium containing 0.8 mg/ml potato dextrose. After exposure the samples were cleaned, dried, and analyzed for weight loss, changes in their molecular weight distribution as determined by gel permeation chromatography, molecular changes as seen by Fourier transform infrared spectrometry (FT-IR), and changes in tensile strength. Tensile strength of polycaprolactone began to decrease after 1 week of exposure, even though the molecular weight distribution showed no change. FT-IR spectra indicated a loss of amorphous polycaprolactone from the surface of samples.Certain commercial products ae identified in order to specify experimental procedures adequately. In no case does such identification imply endorsement by the National Institute of Standards and Technology or that the material is necessarily the best available for the purpose.     

Preparation of organically functionalized silica gel as adsorbent for copper ion adsorption

A novel adsorbent (AMPS-silica) was synthesized by bounding AMPS (2-acrylamido-2-methylpropanesulfonic acid) onto silica surface, which functioned with -methacryloxypropyltrimethoxysilane reagent. The adsorbent was characterized by nitrogen adsorption/ desorption measurement, thermogravimetric analysis (TGA) and potentiometric titration analysis. The TGA result indicated that the surface modification reactions introduced some organic functional groups onto the surface of silica. The surface area of AMPSsilica was 389.7 m2/g. The adsorbent was examined for copper ion removal in series of batch adsorption experiments. Results showed that the adsorption of Cu2+ onto AMPS-silica was pH dependent, and the adsorption capacity increased with increasing pH from 2 to 6. The adsorption kinetics showed that Cu2+ adsorption was fast and the data fitted well with a pseudo second- order kinetic model. The adsorption of Cu2+ onto AMPS-silica obeyed both Freundlich and Langmuir isotherms, with r2 = 0.993 and r2 = 0.984, respectively. The maximum Cu2+ adsorption capacity was 19.9 mg/g. The involved mechanism might be the adsorption through metal binding with organic functional groups such as carboxyl, amino and sulfonic groups. Cu2+ loaded on AMPS-silica could be desorbed in HNO3 solution, and the adsorption properties remain stable after three adsorption-desorption cycles.     

Methanogenic community dynamics in anaerobic co-digestion of fruit and vegetable waste and food waste

A lab-scale continuously-stirred tank reactor (CSTR), used for anaerobic co-digestion of fruit and vegetable waste (FVW) and food waste (FW) at different mixture ratios, was operated for 178 days at the organic loading rate of 3 kg VS (volatile solids)/(m³.day). The dynamics of the Archaeal community and the correlations between environmental variables and methanogenic community structure were analyzed by polymerase chain reactions - denaturing gradient gel electrophoresis (PCR-DGGE) and redundancy analysis (RDA), respectively. PCR-DGGE results demonstrated that the mixture ratio of FVW to FW altered the community composition of Archaea. As the FVW/FW ratio increased, Methanoculleus, Methanosaeta and Methanosarcina became the predominant methanogens in the community. Redundancy analysis results indicated that the shift of the methanogenic community was significantly correlated with the composition of acidogenic products and methane production yield. Different mixture ratios of substrates led to different compositions of intermediate metabolites, which may affect the methanogenic community. These results suggested that the analysis of microbial communities could be used to diagnose anaerobic processes.     

微生物分子生态学进展[综述]

现代分子生物学技术在生态学研究中的应用大大推动了微生物生态学的发展,导致了微生物分子生态学的产生．微生物分子生态学方法弥补了传统的微生物生态学方法的不足,使人们可以避开传统的分离培养过程而直接探讨自然界中微生物的种群结构及其与环境的关系．微生物生态学研究中采用的分子生物学方法主要有核酸探针技术、ＰＣＲ扩增技术、ｒＲＮＡ序列同源性分析方法、剃度凝胶电泳方法等．这些技术方法的采用,取得了一系列重要的成果和微生物生态学研究中的突破［１～６］,使得对某些微生物的研究成为可能,并在分子水平上阐述了生态问题…