Results of An Indoor Size Fractionated PM School Sampling Program in Libby, Montana

Libby, Montana is the only PM_2.5 nonattainment area in the western United States with the exceptions of parts of southern California. During January through March 2005, a particulate matter (PM) sampling program was conducted within Libby’s elementary and middle schools to establish baseline indoor PM concentrations before a wood stove change-out program is implemented over the next several years. As part of this program, indoor concentrations of PM mass, organic carbon (OC), and elemental carbon (EC) in five different size fractions (>2.5, 1.0–2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) were measured. Total measured PM mass concentrations were much higher inside the elementary school, with particle size fraction (>2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) concentrations between 2 and 5 times higher when compared to the middle school. The 1.0–2.5 μm fraction had the largest difference between the two sites, with elementary school concentrations nearly 10 times higher than the middle school values. The carbon component for the schools’ indoor PM was found to be predominantly composed of OC. Measured total OC and EC concentrations, as well as concentrations within individual size fractions, were an average of two to five times higher at the elementary school when compared to the middle school. For the ultrafine fraction (<0.25), EC concentrations were similar between each of the schools. Despite the differences in concentrations between the schools at the various fraction levels, the OC/EC ratio was determined to be similar.     

Study of Trace Elements and Soot in Aerosols from a Coal-Fired Power Plant in Northern Vietnam

Two measurement campaigns were conducted in two sampling sites, An Thinh and Duy Minh, in northern Vietnam during the months of November–December 2000 and November 2001–February 2002 in order to investigate the extend of the particulate air pollution from the Pha Lai coal fired power plant. Fine particle samples were analyzed by Energy Dispersive X-Ray Fluorescence spectrometry and soot samples were analyzed by reflectometer. The result showed that high concentration of soot and elements mostly coincided with the air masses originating from the power plant. Sea spray aerosol was found to be the major source of chlorine at both sites. Ratios of specific elements and principal component analysis (PCA) revealed that coal combustion was the main contributor to the air pollution at both sites. PCA also indicated that there were other sources responsible for the elements emission, probably the influence of long distance transport and Asian Brown Cloud.     

Comparative on Causes and Accumulation of Selenium in the Tree-rings Ambient High-selenium Coal Combustion Area from Yutangba, Hubei, China

Toxic trace elements emitted during coal combustion are the main sources of air pollution. They are released into the atmosphere mainly in the forms of fine ash, smoke and flue, and thus adversely affect plant, animal and human health. Selenium is one of toxic and the most volatile in coal. Large amount of atmospheric emission of selenium, as well as selenium present and scrubber stockpiles in ash may create serious environmental problems. In the paper, on the basis of investigating the abundance and distribution of selenium in plant-rings during recent 20 years, the bioaccumulation of selenium is explained that selenium in plant, which were collected from the village of selenium-rich coal combustion, is much higher than that in plants collected away from the village of selenium-rich coal combustion. The main origins of selenium are selenium-rich coal combustion and high-selenium rock weathered. The selenium recycle by food chain and selenium will accumulate and redistribute in environments.     

The relationship between oxygen consumption rate and temperature during coal spontaneous combustion

Spontaneous combustion is a major natural disaster in coal production. In the process of exploring coal self-ignition, a series of hypotheses have been put forward, most scholars agree that the current coal-oxygen compound theory. Oxygen consumption rate reflects the status of coal spontaneous combustion, and it is also one of the parameters necessary for numerical simulation of coal spontaneous combustion. In this paper, a coal heating and oxidation experiment was designed, Experimental device consists of heating and oxidation furnace, gas chromatograph, temperature control and data acquisition systems and other equipment components. Three coal samples whose weight each is 5 g were selected for the study. By experiment, oxygen concentration at the inlet and outlet of temperature oxidation furnace was measured. Oxygen consumption rate is calculated in the heating process of coal according to air flow. In the Cartesian coordinate system, the temperature as abscissa and the oxygen consumption rate for the longitudinal coordinates, drawing the relationship between oxygen consumption rate and temperature plot. And then regression analysis was used to analyze the relationship between oxygen consumption rate and coal temperature during the heating and oxidation process of coal. The results show that the oxygen consumption rate and temperature of coal were linear relationships both before and after the critical temperature when the coal temperature is less than 180 °C. Before the critical temperature oxygen consumption rate is low, however it increases rapidly when coal temperature reaches a critical temperature. The result is important for the prevention and treatment of spontaneous combustion of coal.     

基于重要性分析的甲烷/乙烯混合燃烧框架机理构筑

建立了基于重要性分析的详细化学机理分析平台,利用耦合组分化学存活时间和敏感性系数的重要性参数,确定详细机理中的准稳态组分,通过移除这些组分及其相关反应,得到了计算精度较高的框架机理。针对目前燃烧学界较为关注的混合燃烧问题,以甲烷、乙烯这两种典型低碳碳氢燃料为研究对象,对其详细化学反应机理进行了分析,利用重要性分析法构筑框架机理,并对甲烷/空气和甲烷/乙烯/空气预混火焰进行了数值计算。与详细机理相比,框架机理所涉及的组分数与基元反应数都得到了大幅度的降低,计算时间明显减少,但对火焰温度及反应物、生成物、中间组分浓度的预测与采用详细机理得到的结果吻合良好,证明了重要性分析法的有效性与可靠性。     

立体抽采条件下高瓦斯采空区煤自燃危险性预测

为准确预测高瓦斯采空区煤自燃的状况,通过分析发现高抽巷是监测采空区遗煤自然发火的最有效地点。推算出采空区气体在高抽巷中所占的体积分数,进而确定采空区遗煤不同的燃烧阶段所对应的CO体积分数和CO指数。结果表明:当高抽巷中的CO体积分数Chdr CO<30×10-6或CO指数ICO<0.5%时,采空区的遗煤处于低温氧化阶段;当高抽巷中的CO体积分数Chdr CO≥30×10-6或CO指数ICO≥0.5%时,采空区遗煤进入自然发火危险阶段,此时必须采取措施控制采空区自燃氧化的进一步发展。对80501工作面的采空区煤自燃成功地进行预测预报,实现了安全生产。     

可燃气体燃爆特性综合试验装置构建与甲烷试验

为研究半开敞空间内可燃气体爆炸过程,设计带有泄压面的气体爆炸室,并在此基础上构建一套可燃气体燃爆特性综合试验装置。运用该试验装置,研究预混塔内甲烷气体分层现象以及甲烷爆炸浓度与最小点火能之间的变化规律。甲烷分层试验结果表明:静置一段时间后,预混塔中甲烷浓度随高度的增加而增大。最小点火能试验结果显示,当甲烷的试验爆炸体积分数在10%～13%时,其浓度与点火能之间呈现比较平缓的变化关系,而当其体积分数小于10%或大于13%时,浓度稍微变化,其点火能将发生明显变化。     

约束空间可燃气体燃烧爆轰特性的数值研究

在可燃气体的输送、贮存、加工和使用过程中,容易发生可燃气体的燃烧和爆炸事故。文中基于有限体积方法,采用五阶WENO格式进行左右状态量的重构后,利用ROE格式进行空间离散,自行开发程序对甲烷氧气的气相爆轰波传播过程进行了数值研究。计算结果表明:在CH4质量分数为10%的混合气体中,高温高压气团可诱导气相发生爆轰,爆轰波以2133.3 m/s的速度传播。在带有障碍物的约束空间内,文中分析了障碍物不同高度、不同间距条件下爆轰波传播时波的绕射、马赫反射等现象,给出障碍物表面压力随时间变化历程和冲量值,揭示波与障碍物的相互作用机理以及由此引发流场的变化规律,为有效地控制可燃气体的燃烧速率、防治爆炸灾害的发生提供理论依据。     

RVVB护套线过电流诱发短路故障发生概率与起火燃烧过程分析

为深入研究电气火灾中护套线因过电流诱发短路故障的转化过程,搭建RVVB护套线过电流诱发短路故障电路,统计短路发生概率,借助高速影像,获取短路发生的时间和次数,分析护套线起火燃烧过程.结果表明:在过电流故障发生1 h内,I≤16 A时护套线仅线芯发热、绝缘炭化,无法诱发短路;I=24 A时护套线发生短路概率为40％,在9...     

采空区热环境对深部倾斜厚煤层自燃区域影响研究

为探究热场对深部倾斜采空区煤自燃区域划分的影响,通过对采场空隙结构和耗氧速率进行分析,利用Fluent软件模拟不同通风方式下热环境对采空区流场及自燃带影响.结果表明:受倾角工作面、采空区空隙率及地温梯度综合影响,下行冷风与受采空区浮升力作用的热风在工作面中下部汇合并涌向工作面,使工作面局部温度升高;上行通风方式采空区蓄...