The feasibility of including sustainability in LCA for product development

The feasibility of combining the concept of sustainability principles and the methodology of Life Cycle Assessment (LCA) is examined. The goal is to achieve an operational tool that incorporates sustainability in product development and strategic planning. While the method outlined has the structure of LCA, it emphasises aspects and parameters often omitted from traditional LCA. The analysis and results can be either qualitative or semi-quantitative. Although a qualitative analysis is less time consuming, it can still highlight the important issues. Qualitative information, which is easily lost in a quantitative analysis, can be emphasised. One of the conclusions is that the method is well suited for screening analysis.     

高浓印染废水处理工程的设计审计与运行结果分析

通过对漂染厂生产工艺过程及排废状况进行审计研究，提出了有针对性的废水处理工艺流程，区别对待废水浓度、污染物成分、化学作用及其工艺原理，实现了废水处理各工艺段的适配与综合节能的协调，在保证废水高效达标处理的前提下使工程优化     

己二胺有机废液在流化床中焚烧的实验研究

在实验室规模的热态流化床试验台上，进行了含5％己二胺有机废液的焚烧 实验研究，在700－900℃范围内，研究温度及空气过剩系数对NOx沿床高的变化规律，以及它们对NOx排放浓度的影响。实验结果表明，沿高度方向上NOx浓度 逐渐降低，并且存在NO2浓度大于NO浓度这一有趣现象，在900℃下氧量增加有利于密相区NO、NO2浓度的降低，说明在 有氧条件下NH2促进NOx的还原，在不同空气 过剩系数下和然相区出口NOx几乎为零 ，表明900℃是己二胺有机废液焚烧 的合适温度。     

综合福利视角下中国生态文明建设绩效评价及国际比较

基于强可持续研究范式,以生态经济学和可持续发展理论为基础,运用两阶段网络Super-EBM模型进行绩效测算和评价,打开生态福利转化过程的“黑箱”,基于综合福利视角将生态文明建设绩效进一步分解为生态经济效率和经济福利效率,实证研究部分选取2006-2015年的时间序列数据对中国“十一五”和“十二五”期间的生态文明建设绩效水平进行纵向分析,与此同时,选取42个国家2014年的截面数据进行横向的国际对比研究。研究表明：（1）“十一五”到“十二五”期间,中国生态文明建设绩效（0.986）整体水平一般,均未实现DEA有效,但“十二五”期间已呈现出逐年改善的利好趋势。国际比较层面,瑞士（1.647）、印度尼西亚（1.365）、爱尔兰（1.039）依次排名前三位,中国（0.297）排名相对靠后,位列倒数第二。各国之间差异较大,总体上呈现出“OECD国家（0.677）最高、G20国家（0.611）次之、金砖国家（0.417）最低”的态势。（2）从分阶段效率来看,无论是纵向分析还是横向对比,均发现第一阶段的生态经济效率明显低于第二阶段的经济福利效率,生态经济效率偏低是导致生态文明建设绩效总体水平偏低的主要原因。（3）与传统的单阶段、径向或非径向DEA模型相比,两阶段网络Super-EBM模型综合考虑了径向和松弛变量问题,测算出来的效率值更为精确,能够更为客观地反映现实。同时,对于其他领域涉及两阶段或多阶段生产系统的效率或绩效评估具有较好的借鉴价值。最后,根据上述结论提出相应的政策建议。     

高强度钢纵梁内板的成形性分析

重点对高强度钢纵梁内板的成形性进行了分析,并且在详细分析零件几何特点的基础上,对此模型的圆角半径进行了修改,修改后零件的成形性得到了显著提高。     

选择性离子交换法脱除水中NH3-N

采用储量较大的黑龙江省嫩江天然斜发沸石,对其脱除NH_3-N的能力、预处理及洗脱再生方法、交换平衡、交换动力学等进行系统的研究,并对沸石床层的交换过程进行数学模型计算。     

高效原油降解菌和内循环3-PBFB处理油田采出水的研究

在物理化学处理的基础上添加了生物处理部分，即三相生物流化床（3-PBFB）处理油田采出废水。采取了利用高效原油降解菌及漂浮填料、悬浮填料的强化处理措施，使废水出水含油量达到3.5-4.9mg/L，达到国家一级排放标准。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

渣油－水乳化液作为路面抑尘剂的研究

为了有效抑制汽车运输路面的扬尘，选择低浓度渣油－水乳化液作为抑尘剂，通过在实验室大量的试验，掌握了一组渣油乳化的最佳配方及其制备工艺，即渣油３％－６％，乳化剂约０．５％，水９３．５％－９６．５％，制备温度＞７０℃．经过室内和现场大规模试验表明，当路面喷洒量达到２．２ｋｇ／ｍ２时，其有效抑生时间达到１０ｄ以上，并且在一定程度起到养路的作用，长期使用可取得显著的综合经济效益．     

低浓度渣油-水系乳化液的抑尘性能现场试验研究

本文介绍了作者用渣油－水系乳化液做路面抑尘剂在某矿露天坑３种不同类型路面进行的大规模工业性试验。现场测定结果表明：这种路面抑尘剂可以获得比较理想的防尘效果，长期使用该乳化液可取得显著的综合经济效益。