街道峡谷内汽车排放污染物浓度分布的观测与数值模拟

在上海某典型街道峡谷内按一定的空间布点,在一定时段内同时对各布点进行采样并做一氧化碳浓度分析,同时记录车辆种类、车流量、气象条件等,分析街道峡谷内污染物浓度的分布.运用风向频率加权(WDFW)方法,结合大气流动和污染物扩散的CFD模型进行数值模拟计算.结果表明,数值模拟结果和现场观测结果较吻合,建筑物低的一侧污染物浓度远高于建筑物高的一侧污染物浓度,两侧的污染物浓度随着高度的增加而降低.     

卫星光学反射膜光谱反射率空间综合环境退化研究

对玻璃基底和金属基底的铝反射膜在紫外、低能电子、低能质子的综合环境作用下的光谱反射率退化进行了实验研究。试验结果表明两种铝反射膜的光谱反射率均发生了退化,且光谱反射率的退化主要集中在可见光波段,在近红外波段退化很小;玻璃基底铝反射膜退化在420 nm左右出现峰值点,2种金属基底铝反射膜的退化的峰值点在450 nm左右。由于电荷沉积在玻璃中后会抑制带电粒子入射,因此玻璃基底铝反射膜的退化要小于金属基底铝反射膜。     

时间因素对钻屑瓦斯解吸指标K1值测定的影响分析

针对时间因素对钻屑瓦斯解吸指标K1测定结果的影响,采用恒温瓦斯放散试验深入分析钻屑瓦斯解吸指标K1测定理论的准确性,总结因时间因素导致K1值测定误差所带来的现场问题。研究结果表明:K1值的测定误差与时间关系密切,测定启动时间越晚,误差越大;测定启动时间由第1 min延后至第2 min,绝对误差和相对误差最大值分别增加0.081 cm3/(g·min1/2)和2.20%;高瓦斯压力条件矿井或煤层的局部高瓦斯压力区域、构造煤发育区的钻屑瓦斯解吸指标K1值测定结果偏低,测定误差偏大。研究结果可为煤与瓦斯突出预测水平的提升提供技术支撑。     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)     

井下采空区构筑物漏风实测装置研发及应用

为了实时动态监测采空区构筑物漏风情况,自主研发了一种井下采空区构筑物漏风实测装置。通过现场实测及应用,研究结果表明:风流从工作面上进风口漏入采空区,而采空区中风流一部分通过与工作面之间的漏风流进入工作面下进风口,在下隅角位置附近形成一个涡流区;另一部分风流穿过沿空留巷构筑物进入留巷内,由于采空区的压实程度不同,采空区侧留巷内漏风速度曲线近似呈“L”型下降;通过收集分析留巷内漏风气体,其结果可反映采空区中瓦斯浓度分布情况,为采空区瓦斯治理提供了一种新的监测技术手段,且能有效地降低采空区瓦斯事故发生率,保证矿井的安全生产。     

我国农村劳动力流动性就业计量问题研究

改革开放30年来,上亿农村劳动力实现了向城镇非农产业大规模转移,而我国沿袭至今的劳动就业统计制度突出的缺陷是将三部分人--在农村从事纯农的农民,在城镇从事非农工作但户口在农村的农民工,游移于乡城间"亦工亦农"的农村劳动力--排除于劳动统计计量之外.不解决这部分劳动力就业的统计计量的问题,则很难准确回答"中国的失业率究竟有多高?".为此,确定严格的、便于与国际接轨的劳动就业标准,从而构建我国统一的、规范的劳动就业市场至关重要.本文着重探讨了游移于农村与城市之间、就业岗位、就业时间不固定的农村劳动力就业、失业不充分的计量问题.作者在对国内外就业和失业定义和计量标准进行比较和评价基础上,结合我国实情提出了以法定劳动力年工时为核心的劳动力流动性就业的调查和计量方法,并通过调查案例证实了它的有效性与可行性.     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

城市轨道交通噪声的声源特性研究进展

分析了城市轨道交通噪声的主要类型、基本特性、传播规律及其影响因素;综述了国内外城市轨道交通噪声的预测及测量分析技术的研究成果,并对其进行了总结比较,阐述了各种方法的特点、主要成就和局限;最后探讨了城市轨道交通噪声领域今后的研究方向和发展趋势,为解决城市轨道交通发展中的噪声问题提供了参考.     

摆管淋水试验装置的校准方法探讨

文中简述了摆管淋水试验装置的基本结构及其常见的校准方式,对其中的“摆角校准”这一技术难点提出了可行的解决方案并作了较详尽的说明分析。