DISTRIBUTED DISCHARGE OF COOLING WATER ALONG DIRECTION OF STREAM FLOW1

ABSTRACT. A multiple-outfall system for cooling water disposal which is distributed along the direction of stream flow is analyzed. The results provide a simple method of preliminary design of a cooling water discharge outfall system and for a quick extimate of water quality of a polluted stream. It is shown that a properly designed distributed discharge system is capable of preventing serious pollution due to localized discharge of wastes and waste heat; however, the final design of the discharge system should take into account alternative schemes of waste heat disposal and their economic consequences.     

POTENTIALS FOR REUSE OF WASTEWATER IN NORTH CENTRAL TEXAS1

ABSTRACT There are several possible ways in which wastewater from municipalities may be reclaimed and reused so as to minimize the need for imported water in North Central Texas. The rationale for reuse is enhanced by the fact that new water quality requirements in the Trinity River system will necessitate a very high degree of treatment at municipal sewage plants, just for discharge to surface streams. The largest potential market for municipal effluent is the steam-electric power industry. Within the next decade the generating capacity for electric power in North Central Texas will have to be more than doubled to meet increasing demand. Adequate supplies of condenser cooling water for such expansion will be difficult to obtain and assure. New large power stations might advantageously be located adjacent to municipal wastewater treatment plants, to utilize effluent as make-up water for cooling towers. Experience elsewhere has shown that well-treated wastewater can be used for cooling tower make-up with a minimum of trouble, with a considerable saving in overall cost, and with conservation of pristine water for other uses.     

Integrated energy management strategy of powertrain and cooling system for PHEV

ABSTRACT

Energy management strategy (EMS) is crucial in improving the fuel economy of plug-in hybrid electric vehicle (PHEV). Existing studies on EMS mostly manage powertrain and cooling system separately which cannot get the minimum total energy consumption. This paper aims to propose a novel EMS for a new type of dual-motor planetary-coupled PHEV, which considers cooling power demand and effect of temperature on fuel economy. Temperature-modified engine model, lithium-ion battery model, two motors, and cooling system models are established. Firstly, the separated EMS (S-EMS) is designed which manages powertrain and cooling system separately. Sequentially, after the analysis of thermal characteristics of the powertrain and cooling system, the thermal-based EMS (T-EMS) is then proposed to manage two systems coordinately. In T-EMS, cooling power demand and the charging/discharging energy of motors are calculated as equivalent fuel consumption and integrated into the object function. Besides, a fuzzy controller is also established to deicide the fuel-electricity equivalent factor with consideration of the effect of temperature and state of charge on powertrain efficiency. Finally, the hardware-in-loop experiment is carried out to validate the real-time effect of EMS under the New European Driving Cycle. The result shows that cooling power demand and temperature can significantly affect the fuel economy of the vehicle. T-EMS shows better performance in fuel economy than S-EMS. The equivalent fuel consumption of the cooling system of T-EMS decreases by 27% compared with that of S-EMS. The total equivalent fuel consumption over the entire trip of PHEV using T-EMS is reduced by 9.7%.     

Biotopic Variation and Phenogeography of Dreissena polymorpha (Pallas)

The phenetic structure of Dreissena polymorpha populations in different water bodies is considered. The phenotypes of shell pattern and sculpture are identified and described using a scheme based on elementary characters, or pattern elements. It is shown that the frequencies of phenes in mollusks from different biotopes of the cooling system of two thermal power plants differ significantly. The data on species phenogeography are reviewed.     

输电塔塔-线体系风振反应分析

以5A-ZM2型500kV输电塔塔-线体系为例，建立了塔-线体系ANSYS三维有限元分析模型。依据谐波合成法生成作用在输电塔塔-线体系上的风速时程，在五种攻角风荷载作用下，对输电塔位移、输电线位移、主材应力分布和塔的基底反力进行了计算分析，讨论了输电线与输电塔动力耦合作用对输电塔的影响，并提出一些有益的结论。     

降膜对喷淋塔吸收特性的影响

吸收液在喷淋塔内以液滴和降膜两种形式存在,为了深入考察降膜对喷淋塔吸收特性的影响,以多孔分布板代替传统的压力式喷嘴,实现了降膜和液滴流量的可控调节,结合喷淋塔流体力学特性和双膜理论,建立了液滴及降膜的传质模型,并进行了试验验证,通过定量计算,分别考察了喷淋量及空塔气速对降膜吸收速率分率的影响.结果表明:所建模型可以较好地模拟喷淋塔脱氨过程,相对误差小于4％;降膜吸收速率分率几乎不随空塔气速而变化,但随喷淋量增大而减小;当大量吸收液在塔内壁形成降膜时,要达到相同吸收率所需喷淋液量将更大.     

汽车工业中水回用于冷却水系统的研究

汽车生产过程中伴随着大量的自来水消耗与废水排放,因此,汽车工业具有较大的节能减排潜力.国内某汽车厂采用膜过滤技术对达标排放的废水进行深度处理,中水水质达到冷却水回用标准,作为补充水回用于循环冷却水系统.通过对中水水质的监控和冷却水系统的运行控制,保证中水回用实施效果.结果表明:中水回用后,循环冷却水满足系统运行条件,既节约了自来水的消耗又达到了减少污染物排放的目的,在汽车工业中具有一定的推广应用价值.     

电吸附水处理技术(EST)对污水悬浮物去除效果研究

为了研究电吸附水处理技术(EST)对污水悬浮物的去除效果,本文采用电吸附水处理技术对生活污水中悬浮物进行处理分析,结果表明电吸附水处理系统对悬浮物的去除效果较好,去除率达到74.07%,而电吸附模块本身对悬浮物去除率仅为14.29%,氯离子、进水中悬浮物的浓度及进水中的硬度值均对悬浮物去除效率没有影响。因此,电吸附水处理技术可作为污水处理的一种新型有效方法。     

Cultivating hybrid collectives: research methods for enacting community food economies in Australia and the Philippines

Across the globe, groups are experimenting with initiatives to create alternatives to the dominant food system. What role might research play in helping to strengthen and multiply these initiatives? In this paper we discuss two research projects in Australia and the Philippines in which we have cultivated hybrid collectives of academic researchers, lay researchers and various non-human others with the intention of enacting community food economies. We feature three critical interactions in the “hybrid collective research method”: gathering, which brings together those who share concerns about community food economies; reassembling, in which material gathered is deliberatively rebundled to amplify particular insights; and translating, by which reassembled ideas are taken up by other collectives so they may continue to “do work”. We argue that in a climate-changing world, the hybrid collective research method fosters opportunities for a range of human and non-human participants to act in concert to build community food economies.     

基于业务的网络可靠性试验流量生成方法研究

网络的发展从仅关注速度的提升转移到关注业务的交付能力,由此网络可靠性问题越来越受到研究者的重视。网络可靠性试验是评价网络可靠性的一种重要手段,而试验流量的生成对可靠性评价结果具有决定性的影响。然而目前从可靠性角度对网络进行试验时,对任务的描述较为简单,无法支撑由客户需求分解到网络流量生成的全过程;从流量模型角度出发的生成技术则仅关注全网流量,难以支持可靠性试验中的流量生成。本文提出基于业务的混合模型的流量描述方法,并使用软件实现,最后进行试验验证所提出方法的有效性。