硬化路面与温度场响应模型研究

硬化路面是城市热环境效应影响因素中较为重要的一个因素.笔者在研究了深圳市城市热效应的基础上,建立了一个三维动态模型对硬化路面条件下的温度场进行模拟.通过将模型的计算结果和在深圳的实测结果进行对比,发现2条曲线吻合较好,模拟结果十分接近实测结果.模型模拟结果还证明了硬化路面由于铺筑的材料具有较大蓄热、导热的能力,而且透水性差,因此温度升降都很快,对城市的热效应贡献大;城市绿化隔离带对城市温度场具有很好的调节作用,因此合理配置城市中的绿地对城市区域微热环境的改善能够起到很好的作用.      

深井动压影响下山煤巷围岩变形机理与控制研究

以刘桥一矿Ⅱ66回风下山为工程背景,采用现场实测、实验室实验、数值模拟和工业性试验综合分析了下山煤巷非对称变形破坏机理,提出动压影响下深井软弱煤巷围岩多层次组合控制理论,并给出优化控制措施。研究表明:回风下山变形失稳严重并呈非对称性,围岩完整性较差,强度低。地应力实测显示,回风下山处于高原岩应力区,最大主应力为水平应力且具有明显方向性,与巷道轴线夹角为71°,断面顶底板剪切破坏风险较大;数值模拟显示,回风下山开拓延伸期间,受邻近轨道下山、辅助下山影响显著,4煤回采对其影响较小,6煤工作面回采是下山煤巷非对称失稳的主要诱因;提出以围岩深浅孔注浆为核心,以新型注浆锚索、锚杆为装备基础的高阻让压全断面组合控制理论,并给出具体优化方案。工业性试验显示,下山煤巷围岩变形得到有效控制。     

Understanding and addressing the environmental risk of microplastics

Over the past decades, the plastic production has been dramatically increased. Indeed, a category of small plastic particles mainly with the shapes of fragments, fibers, or spheres, called microplastics (particles smaller than 5 mm) and nanoplastics (particles smaller than 1 μm) have attracted particular attention. Because of its wide distribution in the environment and potential adverse effects to animal and human, microplastic pollution has been reported as a serious environment problem receiving increased attention in recent years. As one of the commonly detected emerging contaminants in the environment, recent evidence indicates that the concentration of microplastics show an increasing trend, for the reason that up to 12.7 million metric tons of plastic litter is released into aquatic environment from land-based sources each year. Furthermore, microplastic exposure levels of model organisms in laboratory studies are usually several orders of magnitude higher than those found in environment, and the microplastics exposure conditions are also different with those observed in the environment. Additionally, the detection of microplastics in feces indicates that they can be excreted out of the bodies of animal and human. Hence, great uncertainties might exist in microplastics exposure and health risk assessment based on current studies, which might be exaggerated. Policies reduce microplastic emission sources and hence minimize their environmental risks are determined. To promote the above policies, we must first overcome the technical obstacles of detecting microplastics in various samples.     

Influence of H2S and NH3 on biogas dry reforming using Ni catalyst: a study on single and synergetic effect

● NH₃ in biogas had a slight inhibitory effect on dry reforming. ● Coexistence of H₂S and NH₃ led to faster decline of biogas conversion. ● Regeneration was effective for catalysts deactivated under synergetic effect. Biogas is a renewable biomass energy source mainly composed of CH₄ and CO₂. Dry reforming is a promising technology for the high-value utilization of biogas. Some impurity gases in biogas can not be completely removed after pretreatment, which may affect the performance of dry reforming. In this study, the influence of typical impurities H₂S and NH₃ on dry reforming was studied using Ni/MgO catalyst. The results showed that low concentration of H₂S in biogas could cause serious deactivation of catalyst. Characterization results including EDS, XPS and TOF-SIMS confirmed the adsorption of sulfur on the catalyst surface, which was the cause of catalyst poisoning. We used air calcination method to regenerate the sulfur-poisoned catalysts and found that the regeneration temperature higher than 500 °C could help catalyst recover the original activity. NH₃ in the concentration range of 50–10000 ppm showed a slight inhibitory effect on biogas dry reforming. The decline rate of biogas conversion efficiency increased with the increase of NH₃ concentration. This was related to the reduction of oxygen activity on catalyst surface caused by NH₃. The synergetic effect of H₂S and NH₃ in biogas was investigated. The results showed that biogas conversion decreased faster under the coexistence of H₂S and NH₃ than under the effect of H₂S alone, so as the surface oxygen activity of catalyst. Air calcination regeneration could also recover the activity of the deactivated catalyst under the synergetic effect of H₂S and NH₃.     

基于区域环境空气质量和碳排放数据的减污降碳协同效果评估

化石燃料燃烧产生的温室气体与大气污染物具有同根同源性,但具体治理中减污降碳的协同效果尚不明确。以浙江省11个设区市为研究样本,对环境空气质量和二氧化碳(CO₂)排放数据进行分析研究,结果显示：2016—2020年浙江省环境空气质量持续改善,但CO₂排放总量仍处于增长阶段。11个设区城市PM_2.5年均浓度降幅在26%～41%之间,二氧化氮(NO₂)年均浓度下降趋势不明显,大部分城市呈现碳排放增加、NO₂浓度下降的特征,只有杭州和温州两市呈现碳排放总量和NO₂、PM_2.5浓度协同下降的趋势。因子相关性分析结果表明,各设区市呈现NO₂浓度与碳排放相关性较大、协同性强,PM_2.5浓度与碳排放相关性较小的特点。进一步通过减污降碳协同定量评价分析表明,浙江地区在环境空气质量改善和温室气体减排已表现出一定成效,但各设区市因产业结构、环境基础条件、协同程度等不同导致减污降碳综合绩效有明显差异。从源头减排实现...     

乙烯菌核利在水溶液中的光解动力学

以高压汞灯和太阳光为光源,研究乙烯菌核利在重蒸水、自来水、湖水及pH缓冲液中的光解动力学。高压汞灯下,乙烯菌核利在重蒸水中的光解半衰期约为28 m in,而在太阳光下为3.86 h。自来水和湖水中溶解性物质对乙烯菌核利在高压汞灯下的光解动力学仅有微弱的淬灭效应,但在太阳光下表现出显著的敏化效应,照光3 h的敏化效率分别为138%和126%。2种光源下,pH 5.0和pH 7.0缓冲液对乙烯菌核利的光解均表现为光淬灭效应,高压汞灯照光60 m in的淬灭效率分别为69%和57%,太阳光照光7 h的淬灭效率分别为77%和33%;pH 9.0缓冲液则表现出显著的敏化效应,高压汞灯照光20 m in的敏化效率为58%,而太阳光照光1 h的敏化效率则达到了415%。     

Reverse logistics in the Chinese auto-parts firms: implementation framework development through multiple case studies

In recent years, the implementation of reverse logistics (RL) in automobile manufacturing has drawn extensive interest from the Chinese government that has launched relevant take-back and environmental regulations and pilot projects. This study focuses on RL implementation issues in Chinese auto-parts manufacturing sector. Based on comprehensive literature review and multiple case studies in the Chinese auto-parts firms, this paper proposes a conceptual RL framework and highlights the major implementation issues. The purpose of this paper is to draw an overall picture of RL in the Chinese context, highlighting implementation issues in the auto-parts sector. Our study suggests that Chinese RL implementation requires close government monitoring mechanism and incentives, top management commitment within firms, technology and human capabilities support.     

铜绿假单胞菌对铜和铅的吸附

研究了铜绿假单胞菌(Pseudomonas aeruginosa)对Cu和Pb的吸附特性.结果表明,相同条件下,该菌株对Cu~(2+)的吸附率低于Pb~(2+).对于单一重金属体系,吸附率均随时间的延长先上升后平稳变化,2 h达到稳定.吸附率随投菌量的增加先迅速增加,之后趋于平稳.对于Cu~(2+),投菌量为1 g·L~(-1)时吸附率达到稳定,而Pb~(2+)的吸附效果达到平稳时的投菌量为0.5 g·L~(-1).单位质量菌体对Cu~(2+)、Pb~(2+)的吸附量随投菌量的增加而下降.pH为3时,菌体的吸附效果较差,当pH为5~8时,2种重金属的吸附效果较高.对于活菌,Pb~(2+)对菌体吸附Cu~(2+)有抑制作用,而Cu~(2+)对菌体吸附Pb~(2+)的影响无明显规律.对于失活菌,P.aeruginosa吸附Pb~(2+)和Cu~(2+)的效果均随共存重金属浓度的增大而降低,但Cu~(2+)对Pb~(2+)的影响比Pb~(2+)对Cu~(2+)的影响更显著.扫描电镜观察发现,吸附后的菌体较吸附前聚集性更好.总体而言,P.aeruginosa能对水体中共存的Cu~(2+)和Pb~(2+)有较好的吸附效果.     

企业职工心理安全影响因素的研究与分析

通过引入因果图法和层次分析法,将影响心理安全的因素用因果图进行分析和表示,然后根据一定的内在机理将因果图转换成AHP的层次结构模型,求得个因素事件的权值,得出个因素事件的重要程度,从而确定关键因素,即为预防的重点。     

乳化炸药密度在线检测技术

简述了常见密度在线检测方法,提出了一种采用数字称重技术间接在线测量炸药密度的新方法,建立了乳化炸药密度数字在线检测与控制系统,包括系统硬件电路的设计、硬件和电气线路的安装,以及软件程序连接和调试.研究表明,样品质量与检测系统的数字输出存在良好的线性关系,测量精度满足要求.因此,该系统可实现乳化炸药密度的在线实时测定,同时还可通过PLC实现敏化效果的自动反馈与调控,从而保证乳化炸药的敏化效果和产品质量.