Fenton氧化去除制药企业活性污泥中AOX的效果研究

用Fenton氧化处理合成制药企业活性污泥混合液,考察了不同Fe~(2+)、H_2O_2投加量和不同反应时间下污泥与上清液中AOX(可吸附有机卤代物)的去除效果,优化了反应条件,探讨了氧化机制.结果表明,Fenton氧化的最佳条件为H_2O_2投加量0.90 mol·L~(-1),Fe~(2+)投加量0.045 mol·L~(-1)[物质的量比为:n(Fe~(2+))∶n(H_2O_2)=1∶20],反应2 h,污泥和上清液中AOX可分别去除70.7%和78.5%.GC-MS分析结果显示,污泥中含有11种有机卤代物,Fenton氧化后有8种不再检出;3种仍有检出,但浓度有所降低,去除率约为40%~50%.与此同时,污泥中对二甲苯、邻苯二甲酸二异丁酯等非有机卤代物类有毒有害有机物也得到有效去除.     

制氧企业安全评价方法探讨

本文针对制氧行业的生产特点以及安全管理情况,对作业过程中存在的危险、有害因素进行了分析,综合运用安全检查表法(SCL)与故障模式、影响及危险度分析法(FMECA)对制氧企业安全现状进行了评价,并提出了相应的对策措施.结果表明:安全检查表法简便、易于掌握、较为实用;故障模式、影响及危险度分析法对评价人员的要求较高,但可得...     

The potential for improvements in energy efficiency and CO2 emissions in the EU27 cement industry and the relationship with the capital budgeting decision criteria

This paper performs a cost-effectiveness analysis of some of the best available technologies (BAT) that can contribute to decreasing the energy consumption and CO₂ emissions in the European Union’s (EU27) cement industry. Several capital budgeting decision criteria have been used (the payback period, the net present value and the internal rate of return) to study whether or not an investment should be considered worthwhile. The results show that, independent of the capital budgeting decision criteria used, the number of cost-effective retrofitting possibilities available is large compared to the rate of improvements that the industry undertakes annually. This shows the insensitivity of the industry to financial criteria when it comes to making their investment decisions. The possible thermal energy improvement in the clinker production, if all these BATs were implemented, has been quantified to be around 10%. This achievement would place the cement industry in the upper bound of the benchmark range for clinker manufacture. However considering the delays observed nowadays in terms of diffusion of BATs in the cement industry, it requires a conducive policy environment that combines support for both technology development and to their deployment.     

深入认识生态承载力的空间构成发展节约化畜牧业的初探

内蒙古自治区位于祖国北部边疆，地域辽阔，是我国北疆的绿色屏障，由于自然条件的制约，草场保护与草地资源利用间的矛盾比较突出。近几年我区的过度放牧和养殖，使草地面积退化，而且草地建设严重滞后。我区有得天独厚的风能和水资源，但资源分布不均，东部地区水资源和草地资源丰富，而中西部地区风能资源丰富，如何充分认识与利用资源空间有机组成，充分利用生态承载力，实现生存与生态良性发展，则显得十分重要。本文要结合我区的风、水、土、草等资源的分布条件，探讨我区走协调发展的道路。     

吉州生态工业园规划建设探讨

吉州工业园率先在江西省进行了生态工业园规划建设试点。文章介绍了吉州生态工业园规划建设的指导思想与原则,从5个核心系统和三大循环系统阐述了吉州生态工业园规划建设的总体框架,并提出了电子信息产业、机械加工产业、造纸化工产业、食品加工产业4个主导产业的工业生态系统规划,同时提出了吉州生态工业园近期建设的补链项目,预测分析吉州生态工业园近期建设的经济效益、环境效益、社会效益进行。     

三峡库区(重庆段)生态系统健康评价

生态系统的健康和相对稳定是人类赖以生存与发展的必要条件. 分析了三峡库区(重庆段)生态系统的健康状况,使用3S技术获取基础地理数据,构建基于压力-状态-响应模式的三级指标体系模型,并以AHP法结合专家咨询法选取人口密度、地质灾害易发度等10项指标,进行综合得分计算并分级. 结果表明:①在生态环境调查的基础上,应用GIS空间分析方法进行生态系统健康评价具有可操作性和结果的可靠性;②三峡库区(重庆段)生态系统健康质量表现出2～4级生态系统占主体(82.6%)的特点,生态质量一般,人类社会经济活动对生态系统的健康状况造成较大影响;③生态系统健康质量水平分布表现出明显的区域差异,从行政范围来看,彭水县、巫山县较好,巫溪县、武隆县等次之,云阳市、万州区等则较差. 结合系统聚类分析方法分析三峡库区(重庆段)生态系统健康状况空间分异的成因;并从宏观尺度上提出了对该地区人为活动的不良生态后果予以积极预防和有效调控的综合对策.      

发展我国环境监测技术产业的探讨

本文从发展我国环境监测技术产业的角度论述了环境监测技术产业的主要内容,分析了我国环境监测技术产业的发展和存在的问题,对发展我国环境监测技术产业提出了建议。     

造纸工业总排水及漂白废水中AOX监测方法的研究

运用TOX测定仪对造纸工业废水及漂白废水中AOX(可吸附有机卤素)测定;水样用硝酸调pH＜2后,以双根活性炭玻璃填充柱连续吸附;将吸附有机物的活性炭在氧气流中燃烧热解、用微库仑法测定其卤化氢.样品前处理比现行活性炭振荡吸附法样品及试剂用量少、快速、重现性好.方法测定浓度下限为3.73μg/L.     

Sustainable supplier selection criteria classification for Indian iron and steel industry: a fuzzy modified Kano model approach

ABSTRACT

The aim of this work is to provide a systematic approach for sustainability criteria clustering into different useful categories. For this purpose, a methodology has been proposed with the following three steps. (i) A comprehensive set of the sustainability criteria in economic, environmental and social dimension has been extracted from the literature and have been customised for the iron and steel industry. (ii) A fuzzy Kano methodology has been used to classify these sustainability criteria into useful Kano cluster like must-be, one-dimensional, and attractive cluster (iii) further, must-be and attractive criteria derived from the second step were further sub-classified into three categories using Type IV Kano model. All steps have been examined in the iron and steel industry of India and findings indicate that quality and delivery criteria are classified as high must be criteria in the economic realm. Further, environmental and energy management system in the environmental dimension and social responsibility and right of stakeholders criteria in the social dimension are classified as high must be criteria. Prioritising must be and attractive criteria enable decision makers of other industries to select the appropriate criteria to adopt sustainability.     

Quantification of risk perception: Development and validation of the construction worker risk perception (CoWoRP) scale

Introduction: The construction sector is leading in the number of accidents and fatalities; risk perception is the key to driving these numbers. Previous construction safety studies on risk perception quantification have not considered affective risk perception of construction workers or conducted comprehensive reliability and validity testing. Thus, this study aims to fill this need by developing a psychometrically sound instrument – the Construction Worker Risk Perception (CoWoRP) Scale – to assess the risk perception of construction workers. Method: Four phases of scale development, namely, item development, factor analysis, reliability assessment, and validity assessment were conducted with the collection and testing of data from a group (n = 469) of voluntary construction workers in Hong Kong. Results: The CoWoRP Scale with 13 items was shown to have acceptable test–retest reliability, internal consistency reliability, as well as content, convergent, discriminant, and criterion-related validity. Also, the CoWoRP Scale was affirmed to have three dimensions of worker risk perception, namely risk perception – probability, risk perception – severity, risk perception – worry and unsafe. These three dimensions of worker risk perception were negatively correlated with their risk-taking behavior. Conclusions: The CoWoRP Scale is a reliable and valid instrument for measuring the risk perception of construction workers and is expected to facilitate the construction safety studies that take risk perception of construction workers into account. Practical applications: The CoWoRP Scale could serve as an aptitude test to identify the characteristics of construction workers most likely to perceive lower risk in risky work situations. In turn, this information could help safety management provide safety training programs to those workers to enhance their risk perception and thereby minimizing their risk-taking behavior, reducing unnecessary training costs, and improving the construction safety performance.