Evaluation of carrying capacity of city clusters in China with the example of the Blue Economic Zone of Shandong Peninsula

The conflict between city development and urban carrying capacity is getting ever prominent.In order to study and predict the restriction factors and prominent problems in the development of the Shandong Peninsula Blue Economic Zone as well as promote the transfer of economic development pattern in this region,this study starts from four single factor carrying capacity indicators of water,earth,transportation and environment in the city and its comprehensive carrying capacity indicator,evaluates and analyzes its carrying capacity and then papooses policy suggestions for improving its carrying capacity.     

The emission inventory of atmospheric industrial pollution sources of the five cities in Zhejiang Province

The amount of several air pollutants emitted in some cities including Hangzhou,Ningbo,Huzhou,Shaoxing and Jiaxing of Zhejiang Province is based on pollution source census data of Zhejiang Province in 2010.This paper focused on the release of air pollutants such as NO_(x2),SO_2,CO,PM2.5,PM10 and VOC,and calculated the total amount of those air pollutants.It analyzed air pollutant emission factors and found that the electricity and heat production industry released the largest amount of pollutants.     

城市环境质量多级模糊综合评价

文章将模糊聚类与层次分析相结合,提出了城市环境质量多级模糊综合评价法,并将该方法应用于宣州市环境质量综合评价,结果表明,该方法克服了综合指数法受人为因素影响大的缺点,较好地反映了环境质量分级界限的模糊性,并且较好地解决了权值分配问题,使评价结论更合理,可靠,是一种有价值的城市环境质量综合评价方法。     

青蒿试管苗开花及用花器官为外植体诱导丛生芽生产青蒿素

将培养于MS培养基上5wk的青蒿试管苗置于光周期13,光强6000lx,温度为26℃（昼）和22℃（夜）的条件下,成功地诱导其开花,利用不同发育阶段的花蕾和花器官为外植体诱导丛生芽,发现不同浓度（ρ）的6－BA对丛生芽的诱导率和青蒿素的生物合成有重要影响。结果表明：以花蕾为外植体诱导丛生芽的最佳培养基是：MS附加4.0mg L^-1的6－BA和0.05mg L^-1的NAA;但当ρ（6－BA）在0－0.5mg L^-1之间时,有利于青蒿素的合成ρ（6－BA）=0.5-4mg L^-1时抑制青蒿素的生命合成,丛生芽中促进青蒿素合成的最佳ρ（6－BA）为0.5mg L^-1,用HPLC法测定发现用此法得到的丛生芽青蒿素的含量比直接利用叶片诱导的丛生芽青蒿素含量高1倍。     

Determination of PCDDs,PCDFs, PCBs and HCB emissions from the metallurgical sector in Poland

Background The aim of the project was to measure the actual emissions of PCDD/F, PCBs and HCB from 20 selected metallurgical installations in Poland, in order to update the national inventory of dioxin emission from metallurgical industry for developing a strategy for dioxins and furans emission abatement from the subject facilities (UNEP 2005). Methods Sampling methodology used in this work was developed at the Cracow University of Technology because of the complexity of simultaneous sampling and determining PCDFs, PCDDs, PCB and HCB. For the determination a GC-MS/MS system was used. Results and Discussion Results from the work indicate that the highest dioxins and PCB concentrations were recorded for iron ore sintering plants at 1.10–1.32 ng total¹ TEQ/Nm³ followed by aluminium scrap melting at 0.03–0.66 ng total TEQ/Nm³. The highest HCB concentrations at 613–1491 ng/Nm³ were also recorded for iron ore sintering plants, whereas at aluminium plants the HCB concentrations were in the range of only 10.1–22.7 ng/Nm³. Conclusions The above investigations indicate that secondary aluminium production is the most significant dioxins source, if calculated as emission factor values. However, iron ore sintering plants are operating at much higher production capacity, causing this process to become the major source of dioxins, PCB and HCB pollution to the atmosphere in Poland. Recommendations and Perspectives Based on the performed tests and the environmental reviews of selected plants several recommendations were formulated for the reduction of generation or of emission of these pollutants from iron ore sintering plants, electric arc furnace steel production processes, hot-blast furnace operations, secondary aluminium smelting and primary zinc production from zinc cathodes.     

酒精行业循环经济模式研究

分析了发酵类酒精行业各工段的特点,根据循环经济"3R"原则,提出了一种新型的循环经济模式,包括酒糟废液厌氧发酵产生的沼气的回收利用、利用发酵沼渣制取生态复合肥、收集利用酒精发酵产生的二氧化碳和杂醇油副产物、工艺产出热能的热泵回收利用等.该循环经济模式提高了酒精行业的资源和能源的利用率,降低了各种副产物的排放量,在一定范围内实现了资源的循环利用,为社会和企业带来了巨大的生态和经济效益.     

化工园区污水特征分析及生物毒性研究

对天津市某化工园区9个主要污染企业及总排放口的废水进行监测分析,测定了12项水质常规指标和8项重金属指标,采用主成分分析法和生物毒性测试对化工区废水的水质进行了综合评价。结果表明,水质指标中大部分常规项目(如COD、氨氮和重金属含量)在多数企业污水中都符合排放标准,总氮、总磷污染较重,其中磷的污染最严重,最高超标23.83倍;影响污水性质的第一主成分为氯化物、电导率、全盐量和Cr,第二主成分为溶解氧、悬浮物、氨氮、总氮、总磷和As;废水具有一定的生物毒性,且不同化工企业之间毒性差异较大。水质化学测定的结果和生物毒性程度有一定相关性,但也存在差异,应该结合两者综合评价水质污染特征。     

珠江三角洲制鞋行业挥发性有机化合物排放系数研究

采用工艺调查与现场监测相结合的方法,以物料衡算法为依据,通过现场监测结果进行验证,研究了制鞋行业挥发性有机化合物(VOCs)排放系数。结果表明,水性胶粘剂使用企业的VOCs排放系数为(5.25±2.67)g/双,油性胶粘剂使用企业的VOCs排放系数为(30.11±10.60)g/双,根据不同类型胶水在制鞋行业中所占的权重,可得到反映地方特色的制鞋行业VOCs排放系数。     

能源结构变化对兰州市大气质量的影响

将2001—2010年的主要能源材料消耗、主要污染物变化及主要行业分布进行了相关性分析,结果表明:兰州市大气4种主要污染物中除烟尘呈下降趋势外,废气总量、SO2、NOx仍呈上升趋势;主要污染源为燃煤,主要污染行业为电力、蒸汽热水产供业;废气和SO2排放总量与燃煤和燃气呈强正相关,而NOx排放只与燃气呈强正相关。建议发挥兰州地域优势,加大以水电供应为主的能源结构调整,对改善当地空气质量有重要价值。     

萧山市羽绒行业污染源调查与排污系数的确定

通过对萧山市羽绒行业中典型企业－－浙江三弘国际羽绒有限公司排放废水的监测分析,计算其羽绒废水中各污染物的排放量,由此确定羽绒行业污染物排放系数和排污总量,为污染物排放总量的控制管理提供了有效依据。