我国《新化学物质环境管理办法》修订探讨

介绍了我国新化学物质环境管理的相关要求;结合国际新化学物质环境管理经验和近年国内生态环境保护形势的要求,分析了我国新化学物质环境管理制度存在的主要问题;从调整管理类别、明确物质范围、简化申报类型、建立排查机制、强化主体责任、授权技术内审、简化信息报告、完善相关内容等方面对我国《新化学物质环境管理办法》的修订完善进行了探讨。     

Influence of ATD versus PMHS reference sensor inputs on computational brain response in frontal impacts to advanced combat helmet (ACH)

ABSTRACT

Objective: This study analyzed the influence of reference sensor inputs from anthropomorphic test devices (ATDs) versus postmortem human subjects (PMHSs) on simulations of frontal blunt impacts to the advanced combat helmet (ACH).

Methods: A rigid-arm pendulum was used to generate frontal impacts to ACHs mounted on ATDs and PMHS. An appropriately sized ACH was selected according to standard fitting guidelines. The National Operating Committee on Standards for Athletic Equipment (NOCSAE) head was selected for ATD tests due to shape features that enabled a realistic helmet fit. A custom procedure was used to mount a reference sensor internally near the center of gravity (CG) of the PMHS. Reference sensor data from the head CG were used as inputs for the Simulated Injury Monitor (SIMon). Brain responses were assessed with the cumulative strain damage measure set at 10%, or CSDM(10).

Results: Compared to ATD tests, PMHS tests produced 18.7% higher peak linear accelerations and 5.2% higher peak angular velocities. Average times to peak for linear accelerations were relatively similar between ATDs (5.5?ms) and PMHSs (5.8?ms). However, times to peak for angular velocities were higher by a factor of up to 3.4 for PMHSs compared to ATDs. Values for were also higher by a factor of up to 13.1 when PMHS inputs were used for SIMon.

Conclusions: The preliminary findings of this work indicate that small differences in ATD versus PMHS head kinematics could lead to large differences in strain-derived brain injury metrics such as CSDM.     

战场损伤评估程序研究

由于现行战场损伤评估程序相对简单,与实际战场评估活动需求有一定的差距。根据美军飞机和车辆战场损伤评估程序,对战场损伤评估程序进行了详细分析和改进。改进后,战场损伤评估程序分为3个主要组成部分,即战场损伤评估前应明确的问题、系统级评估、关键件级评估。战场损伤评估前应明确的问题包括损伤装备和战术要求两个方面。系统级评估主要包括损伤定位和确定关键件。关键件级评估包括损伤定位、确定抢修方法和提交评估报告3方面。最后,以某火炮为例进行了实例分析。     

电子设备危险频率的基本检测方法

提出了3种检测危险频率的方法。正弦扫频法以正弦扫频试验为基础,测量设备的响应曲线以识别危险频率;随机法基于频响函数随机测试原理,并利用FFT谱分析与随机信号处理技术,可根据情况分别采用幅频特性检测法、分量检测法、矢量检测法;脉冲法(锤击)的原理是利用锤头与设备敲击时产生的瞬态脉冲,从而激发出设备在一定频带内的危险频率。还从使用角度提出了一些建议。     

Entropy method for determination of weight of evaluating indicators in fuzzy synthetic evaluation for water quality assessment

Introduction The fuzzy synthetic evaluation for water quality assessment of nature water resource has been studied and put into practice extensively in recent years (Qin, 2003; Liang and Jiang, 2002; Zhu and Lv et al., 1994). By using the fuzzy mathematic…     

Evaluating Ecological Indicators: Lakes In The Northeastern United States

We use data from a survey of several hundred lakes in the northeastern United States by the U.S. Environmental Protection Agency to illustrate an approach to identifying promising indicators of lake condition. We construct a hypothetical gold standard of water quality from the first principal component of 16 chemical variables measured in the lakes, and examine its associations with 71 candidate indicators based on measurements of human activity, birds, fish and zooplankton in the lakes or their watersheds. Nonparametric summaries of these associations – based on rank correlations and receiver-operating-characteristic curves – suggest that variables summarizing the extent of human disturbance are generally the strongest indicators. To the extent that our water-quality variable is a useful proxy for ecological condition, our results suggest that easily-obtained measures of human activity are at least as predictive as many of the harder-to-measure biological indicators that have been proposed.     

江苏省国家重点监控企业不达标原因及对策

统计了2014年以来江苏省国控企业不达标情况。从企业和环境保护部门两方面对国控企业不达标原因进行了分析。指出,企业应承担起污染治理的主体责任,健全企业环境保护制度;加强污染治理技术的研发及提高运维管理队伍的专业化水平,以适应新环保法的要求;环境监管部门强化执法宣传及违法行为的查处力度,让企业主动守法;加强国控企业环境信息的公开及宣传力度,形成良好的社会公众监督氛围;省级人民政府应积极落实国家生态文明建设的总规划,开启新的里程碑。     

PM2.5手工监测技术要点探讨

以重量法为原理的手工监测法是国内外监测环境空气PM2.5质量浓度的标准方法,在空气质量监测中具有重要应用。该文以2012年跨4个季度近150 d的PM2.5手工监测实际操作经验为基础,重点探讨了手工监测法各环节的监测技术要点,如手工监测采样器的操作技术、滤膜种类的选择及前处理要求、滤膜更换技术、滤膜平衡和称重条件、质量保证和质量控制技术等,以期为推广PM2.5手工监测法提供技术参考。     

全国及重点区域臭氧污染现状

分析2013—2016年中国开展臭氧(O_3)监测的338个城市(港、澳、台不在统计范围)O_3污染现状和时空变化特征,结果表明:中国城市O_3污染日益突出,2015年54个城市O_3超标,75.9%的O_3超标城市位于京津冀及周边、长三角、珠三角区域,O_3区域污染特征显著。74个城市O_3浓度整体呈上升趋势并向高值区集中,京津冀区域O_3污染最为严重。O_3污染季节变化特征明显,O_3污染主要集中于5—10月,京津冀、长三角和珠三角区域O_3最高超标天数分别出现在6、5、10月。建议加强O_3成因分析,建立O_3污染控制策略,有效应对O_3污染,实现科学减排。     

Application of the UAM-V and Use of Indicator Species to Assess Control Strategies for Ozone Reduction in the Lower Fraser Valley of British Columbia

Modelled and measured indicator species ratios of O₃/NOz, O₃/NOy, H₂O₂/HNO₃, HCNO/NOy for the Lower Fraser Valley were compared with VOC-NO_x-O₃ sensitivity threshold values reported in previous studies. Modelled region - specific indicator ratio thresholds derived from 50% NOx and 50% VOC reduction scenarios are provided. They show strongest agreement with the H₂O₂/HNO₃ ratio values found elsewhere. A clear transition region for the LFV from VOC to NOx sensitivity could not be identified, but there is evidence that O₃ concentrations in the western valley, dominated by metropolitan Vancouver, are VOC sensitive, and the more rural eastern valley O₃ concentrations exhibit greater NO_x sensitivity. The UAM-V Process Analysis utility was used to identify physical and chemical mechanisms which contributed to O₃ formation and destruction and indicate the key importance of entrainment from elevated layers generated by the highly complex meteorological conditions in determining near surface O₃ concentrations.