Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

Eutrophication development and its key regulating factors in a water-supply reservoir in North China

Yanghe Reservoir is an important source of drinking water for Qinhuangdao City,North China;however,in recent decades this water source has been eutrophic with recurrent summer cyanobacterial blooms.The trophic grade of the system in summer was mesotrophiceutrophic in 1990 and became hypertrophic in 2011.The nutrient availability is extremely high during the entire year,and the water temperature should be the primary driver of the summer blooms.In May-October of 2010 and 2011,abrupt variations were observed in the Secchi depth(SD) and chlorophyll a(Chl-a),and both the correlated analysis of Chl-a-SD and trophic status indices(TSI) deviation(TSI Chl-a-TSI SD) showed that algal cell density dominated light attenuation.During the algal bloom outbreak,the microcystin concentration was found to vary between 0.35-2.12 μg/L in 2010 and 0.11-1.86 μg/L in 2011.The maximum microcystin content was more than two times the safety limit required for drinking water.Inflow discharges were most concentrated in the summer,with periods of lower residence time and the largest water level fluctuation over the entire year.When a high availability of nutrients promoted a high Chl-a concentration in the whole system,it appeared that the instability caused by the decrease in residence time could not produce effective changes in the cyanobacterial abundance.The results indicated that nutrient enrichment in the aquatic systems of Yanghe Reservoir is the most serious problem and that the status would not been modified effectively by increasing hydrological fluctuations(e.g.,decreasing the residence time).Therefore,decreasing the nutrient concentrations is the only route to improve the water quality of this reservoir.     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。     

ABR反应器中COD/SO_4~(2-)值和硫酸盐负荷对SO_4~(2-)去除影响

利用厌氧折流板反应器,分别考察了反应器启动,及不同COD/SO42-比值和硫酸盐负荷对模拟废水中SO42-去除的影响。实验在(32±0.1)℃,pH为6.0⁶.5的条件下连续运行。结果表明:ABR经过约90 d的启动驯化阶段后,进水硫酸盐及COD浓度分别为1 500 mg/L和3 000 mg/L,水力停留时间为12 h条件下,硫酸盐去除率达到了92%。固定COD/SO42-比值为2.5时,随着进水SO42-浓度的增加(1 5006.5的条件下连续运行。结果表明:ABR经过约90 d的启动驯化阶段后,进水硫酸盐及COD浓度分别为1 500 mg/L和3 000 mg/L,水力停留时间为12 h条件下,硫酸盐去除率达到了92%。固定COD/SO42-比值为2.5时,随着进水SO42-浓度的增加(1 500³ 500 mg/L),SO42-去除率逐渐下降,最低为60%,相反SO42-去除速率随着硫酸盐浓度的增加而增加,最大为7.98 kg(/m3.d);维持恒定的硫酸盐浓度(1 500 mg/L),逐渐缩短水力停留时间以提高反应器中硫酸盐负荷,SO42-去除率呈现先上升后下降的复杂变化趋势,当水力停留时间为6 h时,SO42-去除率达到最大;随着COD/SO42-比值的提高,硫酸盐去除能力增强,且反应体系对硫酸盐负荷的耐受能力也逐渐增强。     

OMS-2负载Pt催化剂的制备及其催化氧化性能研究

采用前掺杂法、沉积-沉淀法和浸渍法制备了氧化锰八面体分子筛(OMS-2)负载Pt催化剂(Pt/OMS-2),对所制催化剂进行了结构和织构表征。并研究了不同制备方法和沉积-沉淀法中不同制备(Pt负载量和溶液的pH值)对Pt/OMS-2催化氧化CO性能的影响。结果表明,沉积-沉淀法制备的Pt/OMS-2-DP催化剂活性最好(T100=100℃)。这与Pt/OMS-2-DP催化剂中Pt颗粒大小及OMS-2载体与Pt之间存在强相互作用有关。Pt负载量明显影响Pt/OMS-2-DP催化剂的催化活性,3Pt/OMS-2-DP催化剂(Pt=3.0 wt%)催化活性最高,这是由于适当Pt负载量,Pt颗粒较小,并与载体OMS-2的相互作用较强,能较好地活化OMS-2晶格氧。pH值对Pt/OMS-2-DP催化剂催化性能影响较大,这与OMS-2的等电点和Pt在不同溶液中存在不同Pt配位体形式有关。     

顶空／气相色谱-质谱法测定水中四乙基铅

建立了顶空,气相色谱-质谱法测定水中四乙基铅方法。水样中的四乙基铅直接顶空进样,质谱分析。实验结果表明,在0．10-5．00μg几范围内线性关系良好,方法检出限为0．02μg/L,得到了良好的分离效果与较高的灵敏度和精密度。方法简便快捷,能达到《生活饮用水卫生规范》（GB/T5750．8—2006）中规定的要求。     

企业环境管理中政府和企业作用分析

我国的经济发展伴随着日益严重的环境问题。在引起环境问题的诸多因素中,来自企业方面的因素对环境的影响最为深远,因此改善环境首先就需要加强企业的环境管理。在推动企业进行环境管理的各种因素中,既有如政府的管制等外部因素,也有如减少成本、产品差异化等企业自身内部因素。外部因素和内部因素对推动企业环境管理都具有重要作用,但也有其局限性。本文通过政府管制及企业自身因素对驱动企业进行环境管理的作用机制的研究,分析各个驱动因素优缺点,寻求各驱动因素的最佳的组合,促使企业更好地加强环境管理。     

在用车I／M制度的脆性及脆性源研究

I／M制度作为一个系统存在着脆性源,如果该制度在运行过程中控制不好脆性源,则其有效实施将受到影响。利用系统脆性理论对该制度进行分析研究找出L／M制度系统的脆性源以及解决措施是其分析研究的目的。在系统子因子中从业人员素质、仪器设备是最大的脆性源,但是其均被维修企业和检测企业所包含。综合分析研究结果显示,由于其在维修企业的脆性度比在检测企业的脆性度大,所以维修企业是该制度最重要的脆性源。用系统脆性理论分析方法分析I／M制度的脆性是一种科学、有效和实用的方法,具有较好的应用前景,为保障更好的运行I／M制度以有效的控制在用车的排放提供了理论依据。