基于增强回归树的城市PM2.5日均值变化分析:以常州为例

利用2014年12月至2015年11月常州市区6个国控监测站空气污染物浓度逐时数据,分析了PM_(2.5)浓度季节变化特征,采用增强回归树模拟分析了PM10、4种气态污染物和7个气象因子对ρ(PM_(2.5))日变化的贡献.结果表明,常州市区PM_(2.5)污染季节差异明显,冬季污染严重且持续时间长,夏季污染较轻.四季ρ(PM_(2.5))空间分布特征存在一定差异,但各季内不同监测站差异较小.增强回归树对ρ(PM_(2.5))日均值进行模拟和验证得到,训练数据的相关性为0.981,交叉验证的相关性为0.957.此外,模拟值与实测值的标准化平均偏差为1.80%,标准化平均误差为10.41%,可见模型拟合效果较好.PM10、气态污染物、气象因子和区域输送及扩散这4种影响类型对全年ρ(PM_(2.5))日均值差异的贡献率分别为23.4%、28%、36.2%和12.6%,表明在对ρ(PM_(2.5))日均值差异的影响上,气象因子二次形成一次源区域输送及扩散.在对ρ(PM_(2.5))日均值差异贡献率大于5%的因子中,ρ(PM_(2.5))日均值与PM10、相对湿度、CO和O3正相关,与温度、SO2和混合层高度负相关,与大气压和NO2关系较复杂.区域输送及扩散方面,东南风向、偏西风向和偏北风向等上风向周边城市的污染物输送对常州市区PM_(2.5)污染存在较大的负面影响.     

基于距离相关系数和支持向量机回归的PM2.5浓度滚动统计预报方案

针对目前空气质量统计预报方法存在的主要缺陷,本文提出了距离相关系数和支持向量机回归相结合的统计预报方案DC-SVR.利用淮安市2013年1—12月PM_(2.5)观测资料和常规气象观测资料,首先在选入预报当日气象要素的基础上,增加选取前期污染物和气象要素作为预报因子,再采用距离相关系数分季节从预报因子中筛选出重要预报因子,最后采用支持向量机回归对PM_(2.5)浓度值进行逐日滚动统计预报.研究发现,淮安地区气温和气压对PM_(2.5)的距离相关性要高于其他气象要素,夏秋季PM_(2.5)与气象要素的距离相关性较春冬季好.基于距离相关系数和支持向量机回归建立DC-SVR模型,PM_(2.5)的试预报值和实测值的全年相关系数高达0.76,平均偏差仅为1.13μg·m~(-3),平均绝对误差为23.47μg·m~(-3).通过与支持向量机回归、人工神经网络的统计预报效果对比,DC-SVR模型有效降低预报因子维数且能自适应选取最佳参数,预报精度显著优于其他3种统计预报方案,可为业务化预报提供参考.     

The application of generalized linear mixed models to multi-level sampling for insect population monitoring

Iwao's quadratic regression or Taylor's Power Law (TPL) are commonly used to model the variance as a function of the mean for sample counts of insect populations which exhibit spatial aggregation. The modeled variance and distribution of the mean are typically used in pest management programs to decide if the population is above the action threshold in any management unit (MU) (e.g., orchard, forest compartment). For nested or multi-level sampling the usual two-stage modeling procedure first obtains the sample variance for each MU and sampling level using ANOVA and then fits a regression of variance on the mean for each level using either Iwao or TPL variance models. Here this approach is compared to the single-stage procedure of fitting a generalized linear mixed model (GLMM) directly to the count data with both approaches demonstrated using 2-level sampling. GLMMs and additive GLMMs (AGLMMs) with conditional Poisson variance function as well as the extension to the negative binomial are described. Generalization to more than two sampling levels is outlined. Formulae for calculating optimal relative sample sizes (ORSS) and the operating characteristic curve for the control decision are given for each model. The ORSS are independent of the mean in the case of the AGLMMs. The application described is estimation of the variance of the mean number of leaves per shoot occupied by immature stages of a defoliator of eucalypts, the Tasmanian Eucalyptus leaf beetle, based on a sample of trees within plots from each forest compartment. Historical population monitoring data were fitted using the above approaches.     

A measurement of community disaster resilience in Korea

Building a community that is resilient to disasters has become one of the main goals of disaster management. Communities that are more disaster resilient often experience less impact from the disaster and reduced recovery periods afterwards. This study develops a methodology for constructing a set of indicators measuring Community Disaster Resilience Index (CDRI) in terms of human, social, economic, environmental, and institutional factors. In this study, the degree of community resilience to natural disasters was measured for 229 local municipalities in Korea, followed by an examination of the relationship between the aggregated CDRI and disaster losses, using an ordinary least squares (OLS) regression method and a geographically weighted regression (GWR) method. Identifying the extent of community resilience to natural disasters would provide emergency managers and decision-makers with strategic directions for improving local communities' resilience to natural disasters while reducing the negative impacts of disasters.     

Income and distance-decay effects on willingness to pay estimated by the contingent valuation method

This study suggests a methodology for enhancing accuracy in evaluating amenity by the contingent valuation method when household's willingness to pay (WTP) is dependent to its income and the distance between a respondent's residence and the location of a target facility. Using a linear city model, this study demonstrates the influences of income and distance-decay effects on WTP. Simulations are performed to check the validity of the model, as well as to predict consequences when income and distance-decay effects are not properly treated. Finally, the suggested methodology is applied to two real cases. The estimation results from a structural model show that the calculated total benefit varies largely when income and distance-decay effects exist and are ignored. Also, an ad hoc model generates significantly different estimates from the utility difference model this study adopted. The difference in estimates suggests that the total benefit has to be estimated by a structural model.     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.     

Impacts of Changes in Precipitation Amount and Distribution on Water Resources Studied Using a Model Rainwater Harvesting System

Water supply reliability is expected to be affected by both precipitation amount and distribution changes under recent and future climate change. We compare historical (1951‐2010) changes in annual‐mean and annual‐maximum daily precipitation in the global set of station observations from Global Historical Climatology Network and climate models from the Inter‐Sectoral Impact Model Intercomparison Project (ISI‐MIP), and develop the study to 2011‐2099 for model projections under high radiative forcing scenario (RCP8.5). We develop a simple rainwater harvesting system (RWHS) model and drive it with observational and modeled precipitation. We study the changes in mean and maximum precipitation along with changes in the reliability of the model RWHS as tools to assess the impact of changes in precipitation amount and distribution on reliability of precipitation‐fed water supplies. Results show faster increase in observed maximum precipitation (10.14% per K global warming) than mean precipitation (7.64% per K), and increased reliability of the model RWHS driven by observed precipitation by an average of 0.2% per decade. The ISI‐MIP models show even faster increase in maximum precipitation compared to mean precipitation. However, they imply decreases in mean reliability, for an average 0.15% per decade. Compared to observations, climate models underestimate the increasing trends in mean and maximum precipitation and show the opposite direction of change in reliability of a model water supply system.     

Robustness of Meteorological Droughts in Dynamically Downscaled Climate Simulations

We examine the robustness of a suite of regional climate models (RCMs) in simulating meteorological droughts and associated metrics in present‐day climate (1971‐2003) over the conterminous United States (U.S.). The RCMs that are part of North American Regional Climate Change Assessment Program (NARCCAP) simulations are compared with multiple observations over the climatologically homogeneous regions of the U.S. The seasonal precipitation, climatology, drought attributes, and trends have been assessed. The reanalysis‐based multi‐model median RCM reasonably simulates observed statistical attributes of drought and the regional detail due to topographic forcing. However, models fail to simulate significant drying trend over the Southwest and West. Further, reanalysis‐based NARCCAP runs underestimate the observed drought frequency overall, with the exception of the Southwest; whereas they underestimate persistence in the drought‐affected areas over the Southwest and West‐North Central regions. However, global climate model‐driven NARCCAP ensembles tend to overestimate regional drought frequencies. Models exhibit considerable uncertainties while reproducing meteorological drought statistics, as evidenced by a general lack of agreement in the Hurst exponent, which in turn controls drought persistence. Water resources managers need to be aware of the limitations of current climate models, while regional climate modelers may want to fine‐tune their parameters to address impact‐relevant metrics.     

基于支持向量回归机的南黄海浒苔分布面积预测模型

绿潮作为一种新型的海洋灾害,已经引起了各个国家的重视.依据2012年南黄海海域浒苔遥感监测分布面积数据,选取了温度、天气状况、风向、风力、浪高5种影响浒苔扩散的气候因子,建立了基于SVR的浒苔分布面积预测模型,并与经典的最近邻点插值模型、线性插值模型、3次样条函数插值模型和分段3次Hermite插值模型进行了回归效果的对比.分析结果表明,基于SVR的浒苔分布面积预测模型能够为浒苔遥感数据的插补提供一种方法,且回归效果优于传统的回归方法,为浒苔的防治提供辅助决策信息.     

崇明东滩湿地沉积物重金属污染的磁诊断

对取自崇明东滩的高潮滩、中潮滩和低潮滩的沉积物柱样进行了磁学、粒度、重金属含量等指标的分析、比较与综合研究. 结果表明:在以粉砂为主的崇明东滩,通过污染负荷指数法进行评价,除低潮滩无污染外,中潮滩和高潮滩均有中度的重金属污染. 选取中度重金属污染的高潮滩沉积物柱样进行粒度、重金属含量以及磁性参数的相关性分析显示,χ_fd,χ_ARM/SIRM与重金属含量和粘土(粒径<4 μm)之间有较高的相关性,并以此建立了磁诊断线性回归模型;χ_fd和χ_ARM/SIRM可作为重金属含量的替代指标.