Rainfall Runoff Relationships for a Cloud Forest Watershed in Central America: Implications for Water Resource Engineering1

Caballero, Luis A., Alon Rimmer, Zachary M. Easton, and Tammo S. Steenhuis, 2012. Rainfall Runoff Relationships for a Cloud Forest Watershed in Central America: Implications for Water Resource Engineering. Journal of the American Water Resources Association (JAWRA) 48(5): 1022‐1031. DOI: 10.1111/j.1752‐1688.2012.00668.x Abstract: Understanding the basic relationships between rainfall and runoff is vital for effective management and utilization of scarce water resources. Especially, this is important in Central America with widespread potable water shortage during the dry months of the monsoon. Potential good water sources are cloud forests, but little information concerning its potential is available to water supply engineers. Our objective is to define rainfall‐runoff‐base flow relationships for a cloud forest catchment. Flumes were installed for measuring river flow in four subwatersheds in La Tigra National Park, Honduras. One of the four watersheds was a 636‐ha subwatershed (WS1) with 60% cloud forest coverage. Precipitation averaged 1,130 mm/yr over the entire basin. About half of the total rainfall became runoff for the cloud forest watershed whereas, for the adjacent undisturbed forested watershed, the total discharge was <20% of the amount of precipitation. Infiltration rates were generally greater than rainfall rates. Therefore, most rainfall infiltrated into the soil, especially in the upper, steep, and well‐drained portions of the watershed. Direct runoff was generated from saturated areas near the river and exposed bedrock. This research provides compelling evidence that base flow is the primary contributor to streamflow during both wet and dry seasons in cloud forest catchments. Protecting these flow processes over time is critical for the sustained provision of potable water.     

Lead-210 and Beryllium-7 fallout rates on the southeastern coast of Brazil

Total ²¹⁰Pb and ⁷Be fallout rates were measured on the coastal region of Niteroi, Brazil. The monthly depositional flux of ²¹⁰Pb and ⁷Be varied by a factor of 26, from 1.7 to 43.3 mBq cm⁻² year⁻¹ and ∼27, from 7.5 to 203.5 mBq cm⁻² year⁻¹, respectively. The relatively large oscillations in the depositional flux of ²¹⁰Pb at this study site were likely due to variations in air mass sources, while the ⁷Be fluctuations may be driven by a combination of weather conditions. Local geology could support the periodic high fluxes of ²¹⁰Pb from continental air masses, as shifting oceanic wind sources were affirmed by the uncorrelated ²¹⁰Pb and ⁷Be fallout activities and ⁷Be/²¹⁰Pb ratios. The ²¹⁰Pb atmospheric deposition was found to be in agreement with local sediment inventories, an important consideration in geochemical studies that estimate sedimentation processes.     

Level and origin of 129I and 137Cs in lichen samples (Cladonia alpestris) in central Sweden

Lichen is a symbiosis between algae and fungi. They have for decades been used as bioindicators for atmospheric deposition of heavy metals, organic compounds and radioactive elements. Especially the species Cladonia alpestris and Cladonia rangiferina are important for the food chain lichen-reindeer-man.The concentration of ¹²⁹I was determined in lichen samples (Cladonia alpestris) contaminated by fallout from atmospheric nuclear tests explosions and the Chernobyl accident. The samples were collected at Lake Rogen District (62.3°N, 12.4°E) in central Sweden in the periods 1961-1975 and 1987-1998, and analysed with accelerator mass spectrometry (AMS) at CNA (Seville) to study its distribution in different layers. Data on the ¹³⁷Cs activity measured previously were also included in this study. The ¹²⁹I concentration ranged from (0.95 ± 0.13) × 10⁸ at g⁻¹ in 1961 in the uppermost layer to (14.2 ± 0.5) × 10⁸ at g⁻¹ in 1987 in deepest layer. The ¹²⁹I/¹³⁷Cs atom ratio ranged between 0.12 and 0.27 for lichen samples collected in the period 1961-1975, indicating weapons tests fallout. For lichen samples collected between 1987 and 1998 the behaviour of ¹³⁷Cs concentrations reflected Chernobyl fallout. The concentrations of the two radionuclides followed each other quite well in the profile, reflecting the same origin for both.From the point of view of the spatial distribution in the lichen, it appears that ¹²⁹I was predominantly accumulated in the lowest layer, the opposite to ¹³⁷Cs for which the highest amounts were detected systematically in the topmost layer of lichen. This vertical distribution is important for radioecology because lichen is the initial link in the food chain lichen-reindeer-man, and reindeer only graze the upper parts of lichen carpets.     

BETR global--a geographically-explicit global-scale multimedia contaminant fate model

We present two new software implementations of the BETR Global multimedia contaminant fate model. The model uses steady-state or non-steady-state mass-balance calculations to describe the fate and transport of persistent organic pollutants using a desktop computer. The global environment is described using a database of long-term average monthly conditions on a 15° × 15° grid. We demonstrate BETR Global by modeling the global sources, transport, and removal of decamethylcyclopentasiloxane (D5).     

医疗废物高温蒸气杀菌工艺中质热传递模型

医疗废物高温蒸气灭菌工艺中,如何使蒸气充分渗透到医疗废物内部是决定杀菌效果的关键。结合实际的操作工艺,以单片物料作为研究对象,将其视为多孔介质,从多孔物料传质传热的基本理论出发,建立了医疗废物内部传质传热数学模型,给出了其解析解,并通过实验验证了所建模型的合理性。     

Seasonal variation of organochlorine contaminants in bonito (Sarda sarda L. 1758) and anchovy (Engraulis encrasicolus L. 1758) in Black Sea region, Turkey

The concentrations of indicator polychlorinated biphenyls (PCBs) and organochlorine insecticides were determined in bonito (Sardasarda L. 1758) and anchovy (Engraulisencrasicolus L. 1758) from the Black Sea, Turkey. Concentrations of total indicator PCBs ranged between <1-17.0 in bonito, and <1-17.5 ng/g fresh weight in anchovy, and total of 1,1,1-trichloro-2,2-bis-chlorophenyl-ethane and its metabolites’ (DDTs) concentrations ranged between 13.4-26.3, and 2.96-19.0 ng/g fresh weight in bonito and anchovy respectively. PCB 52, p,p′-DDE and endosulfan (α + β) were found dominant in both of the fish species. Except endosulfan, and some DDT metabolites, none of the studied organochlorine pesticides was detected in the fish samples. Concentrations of PCBs in anchovy were found higher than those in bonito, whereas DDT and endosulfan concentrations were found similar in both of the fish species. All of the fish samples had residue concentrations below the maximum residue limits (MRL) recommended by FAO/WHO Codex Alimentarius Commission.     

废旧硅橡胶酸性热解残渣热解馏出物组分分析

在不同温度下对废旧硅橡胶酸性热解残渣进行热解,通过气相色谱-质谱联用技术对馏出油的组分进行分离与鉴定.实验结果表明:当热解温度为180℃时,馏出油组分相对较单一,主要是低沸点硅油类物质,可再次回收利用,实现清洁生产;当热解温度为340℃时,馏出油组分多且复杂,主要为高沸点硅油类物质,还有硅油类物质氧化和高温热解后的产物...     

内蒙古乌拉特后旗新兴矿业城市循环经济发展模式研究

内蒙古乌拉特后旗2001年之前一直是国家级贫困县,2003年以来,该旗将矿产资源优势转变为资产优势,通过发展矿业产业经济,一跃成为人均GDP超上海的富裕县,从农牧业为主县转变为工业为主县。这一转变是对草原及生态环境的巨大威胁。通过实地考察,调查研究齐华矿业公司经济发展经验,提出资源综合开发利用与生态平衡发展模式,该模式达到了工业发展起点高、污染破坏最小化的目标,同时经济得到了可持续发展。     

Detailed characterization of polar compounds of residual oil in contaminated soil revealed by Fourier transform ion cyclotron resonance mass spectrometry

Effects of remediation technologies on polar compounds of crude oil in contaminated soils have not been well understood when compared to hydrocarbons. In this study, ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to characterize the changes in NSO polar compounds of crude oil and residual oil after long-term natural attenuation, biostimulation and subsequent ozonation following biostimulation of contaminated soils. N₁ and O₁ species, which were abundant in the crude oil, were selectively biodegraded, and species with higher double bond equivalent values and smaller carbon numbers appeared to be more resistant to microbial alteration. O₂-O₆ species were enriched by biodegradation and contained a large number of compounds with a high degree of unsaturation. Ozone could react with a variety of polar compounds in residual oil after biodegradation and showed high reactivity with polar species containing aromatic or multi-aliphatic rings, including the residual N₁ and O₁ species, naphthenic acids and unsaturated O₃-O₆ compounds. Fatty acids and O₃-O₈ species dominated by saturated alkyl compounds were resistant to ozonation or the primarily incomplete ozonation products. Principal component analysis of identified peaks in the FT-ICR MS spectra provided a comprehensive overview of the complex samples at the molecular level and the results were consistent with the detailed analysis. Taken together, these results showed the high complexity of polar compounds in residual oils after biodegradation or ozonation in contaminated soil and would contribute to a better understanding of bioremediation and ozonation processes.     

Determination of chloramphenicol, enrofloxacin and 29 pesticides residues in bovine milk by liquid chromatography-tandem mass spectrometry

A sensitive method for determination of chloramphenicol, enrofloxacin and 29 pesticides residues in bovine milk by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was developed. Residues of the targets were extracted from milk with acetonitrile, cleaned up by C₁₈-SPE cartridge, and then determined by HPLC-MS/MS. The MS detection was operated in positive or negative ionization mode, depending on the compounds. For confirmation of each target compound, two precursor ion > product ion transitions were selected by multi-reaction monitoring mode (MRM). The method showed good linearity for all the tested compounds over the studied concentration range with correlation coefficient higher than 0.9910. Recoveries for the studied compounds at three spiked levels (0.05, 0.10, 0.19 mg kg⁻¹) in bovine milk were in the range of 71-107% with RSDs not larger than 13.7%, except that recoveries of trifluralin ranged between 62% and 70% at the spiked levels. Limits of quantitation for the analytes were estimated to range between 0.03 × 10⁻³ and 14.5 × 10⁻³ mg kg⁻¹. The proposed method was applied for the determination of the analytes residues in real samples. The found levels of the analytes in milk samples were lower than maximum residues levels (MRL).