Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

灾难模型化及其国外主要开发商

简略分析了灾难模型化和它在保险业中的应用;介绍了当前国外从事灾难模型化的主要研发单位,包括独立的模型化公司、大学研究所、再保险公司、再保险中介经纪公司和政府机构。同时收集了一些最近灾难模型化些文献,希望这些信息能有助于同行在我国减灾保险方面的研究。     

Ammonia large scale atmospheric dispersion experiments in industrial configurations

A programme of large-scale experiments for atmospheric dispersion was carried out by INERIS over a period extending from December 1996 to April 1997. The objectives of the test campaign were to measure anhydrous ammonia concentrations in a range of few meters to 2 km from the release, in order to generate data to be used to improve 2-phase discharge and dispersion modelling.

The discharges were released from a 6-tonne storage tank of pressurised liquid ammonia and through a discharge device with an outlet diameter of 2 in. Fifteen trials were carried out with various release configurations corresponding to industrial situations (impinging jets on the ground and on a wall at various distances, release through a flange without seal…). The quantity of ammonia discharged from the liquid phase varied according to the tests, from 1.4 to 3.5 tons for durations between 7 and 14 min and, therefore, at flow rates between 2 and 4.5 kg/s. Approximately 200 sensors were settled downwind to measure ammonia concentrations and temperature in the plume. These tests showed that for discharges with identical flow rates the distances corresponding to the same concentration vary a lot according to the configurations. These distances tend to be reduced by the presence of obstacles or retention dikes that collected liquid ammonia. In the paper, the main experimental results are presented. In order to enable the comparisons with numerical predictions, more detailed information are given in [Bouet R. (1999). Ammoniac—Essais de dispersion atmosphérique à grande échelle. INERIS rapport, ref INERIS-DRA-RBo-1999-20410 (available at http://www.ineris.fr/recherches/recherches.htm).     

Review of LCA studies of solid waste management systems – Part II: Methodological guidance for a better practice

Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of the provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs.     

基于污染防治技术模拟的造纸行业环境管理方法研究

为评估工业水污染物减排潜力、探究污染防治技术模拟在污染物总量控制、污染物排放限值等环境管理中的应用,按照"原料-工艺-技术-产品"的耦合关系建立了"工业污染物减排潜力分析及环境管理"模型,集成自下而上建模和情景分析等方法在我国造纸行业进行案例研究.结果表明,在政策组合情景下,废水、COD、氨氮在2015年的减排潜力分别为7×108t、39×104t、0.3×104t,2020年分别为13.8×108t、56×104t和0.5×104t;2010~2020年期间加强末端治理仍然是主要减排途径,但2015~2020年间行业结构调整的作用将逐渐提升,并使行业产污水平在2015年和2020年基本达到国内或国际先进水平,废水和氨氮指标在2015年和2020年基本满足排放标准,但COD难以达标.     

基于ANN的土壤重金属分布和污染评价研究

农田土壤重金属污染与备受关注的农产品安全问题有密切联系,因此对其进行研究意义重大。以江苏省南通市为研究区,利用采样点实测数据,借助神经网络模型(ANN)并结合3S技术对问题进行研究,从而对土壤重金属的空间动态分布进行描述,并对各个空间位点重金属的污染状况进行评价。结果表明,神经网络模型能够智能地学习各个样点的空间位置与该点各重金属含量之间的映射关系和预先设计好的分类评价模式,并能够稳健地对各个空间插值点处的重金属含量和各个位点的重金属污染状况进行预测和评价。结论显示,南通市大部分农田土壤重金属污染较轻,但也存在局部地区的严重污染。结论与实际情况相符,表明神经网络模型可以为农田土壤重金属的研究提供一个新的思路和方法。     

An Experimental Methodology for Monitoring Contaminant Transport Through Geotechnical Centrifuge Models

In this paper, an attempt has been made to highlight an experimental methodology for monitoring contaminant transport through locally available silty soil and commercially available clay in geotechnical centrifuge models, for different compaction states. Use of multiple depth sensors to determine depth distribution of sodium chloride in the soil column has been detailed. The obtained results have been compared with argentometric method. To validate the centrifuge modelling, modelling of models has been used. The test setup developed can simulate contaminant transport mechanisms through the soil mass, which is approximately 10 m deep, over a period of 600 days. R _e and P _e are found to be N times higher in the centrifuge models. These numbers are found to be several orders less than unity. This indicates that laminar flow prevails and the dominating Cl⁻ transport mechanism in centrifuge is diffusion. The study also highlights the fact that the geotechnical centrifuge modelling can be used as a viable alternative to field scale experimentation.     

Local and regional variability in snow conditions in northern Finland: A reindeer herding perspective

Weather station measurements were used to force the SNOWPACK snow model and combined with reindeer herders’ experiences to study the local and regional variations in snow conditions in a Finnish reindeer herding area for the 1981–2010 period. Winter conditions varied significantly between the four selected herding districts and between open and forest environments within the districts. The highest snow depths and densities, the thicknesses of ground ice, and the lengths of snow cover period were generally found in the northernmost districts. The snow depths showed the strongest regional coherence, whereas the thicknesses of ground ice were weakly correlated among the districts. The local variation in snow depths was higher than the regional variation and limits for rare or exceptional events varied notably between different districts and environments. The results highlight that forests diversify snow and foraging conditions, e.g., ground ice rarely forms simultaneously in different environments. Sufficient and diverse forest pastures are important during the critical winter season if reindeer herding is pursued on natural grazing grounds also in the future.     

A DFT study of the reactions of O3 with Hg° or Br

In the mid 1980s the study of ozone reactivity gained a significant interest with the discoveries of the stratospheric ozone hole (Farman et al., 1985) and of the ozone depletion events in the polar boundary layer (Oltmans et al., 1989). In the stratosphere, the mechanism involves heterogeneous reactions on polar stratospheric clouds that lead to chlorine activation (Solomon et al., 1986). In contrast, tropospheric ozone depletion occurring during polar springtime rather involves reactive bromine species. They are released during a series of photochemical and heterogeneous reactions often called the bromine explosion (see the review of Simpson et al., 2007). In this reaction sequence, an essential step is the generation of photolyzable Br₂, the precursor of two Br atoms, via the multiphasic reaction (1):

(1)

HOBr + Br⁻ + H⁺ → H₂O + Br₂

The production of reactive HOBr could occur with the oxidation of BrO by HO₂.     

The role of remote sensing in hydrological modelling of the Okavango Delta, Botswana

A coupled surface water-groundwater model of the Okavango Delta has been built based on the United States Geological Survey software MODFLOW 2000 including the SFR2 package for stream-flow routing. It will provide a new tool for evaluating water management and climate change scenarios. The delta's size and limited accessibility make direct, on the ground data acquisition difficult. Remote sensing methods are the most promising source of acquiring spatially distributed data for both model input parameters and calibration. Topography, aquifer thickness, channel positions, evapotranspiration and precipitation data are all based on remote sensing. Simulated flooding patterns are compared to patterns derived from visible to thermal NOAA-AVHRR data and microwave radar ENVISAT-ASAR data.