A SPATIAL LINEAR PROGRAM FOR OPTIMALLY SCHEDULING FOREST MANAGEMENT TO MEET STORMFLOW OBJECTWES1

ABSTRACT: A spatial linear program that strategically arranges and schedules forest treatments so as to meet peak stormflow objectives is formulated and demonstrated. The approach uses simulated spatial routing of stormflows nested as short‐term time schedules within longer‐term forest planning time periods. A simple case example is used to demonstrate the formulation and explore its spatial sensitivity.     

湖北省土地利用减碳增效系统仿真及结构优化研究

土地利用变化是引起碳排放的重要原因之一,土地经济效益是利用土地的目标之一,如何通过优化土地利用结构实现土地利用减碳增效是值得研究的重要问题。基于系统结构与功能相互作用的视角,梳理复杂系统内变量间的反馈关系,运用系统动力学(SD)进行建模,将约束条件纳入到多目标规划(MOP)中,实现MOP与SD模型整合,进行系统仿真并得出优化后2020年湖北省土地利用结构。结果显示,利用SD-MOP模型能够实现减碳增效目标下土地利用结构优化,与2008年真实值相比,耕地、林地、牧草地及建设用地分别增加了0.33×10~4、30.17×10~4、0.08×10~4和16.37×10~4 hm~2,其他农用地及未利用地分别减少7.23×10~4、33.15×10~4 hm~2;与无约束SD单模型仿真相比,土地利用碳排放量减少了58×10~4 t,经济效益年增长率维持在3.58%,优化方案具有可行性。SD-MOP模型优化的土地利用结构符合区域可持续发展要求,兼顾了土地利用碳减排和经济效益增长的双重目标,能为区域土地资源优化配置提供参考。     

A Spatial Analysis of the Economic and Ecological Efficacy of Land Retirement

This paper uses a cellular automata simulation model of a hypothetical landscape to investigate the role of location as it relates to the efficacy of land retirement in achieving two environmental goals: hydrological improvement and habitat improvement. Statistical analysis of simulation results is used to show how absolute and relative location relate to achievement of these objectives. Linear and nonlinear compromise programming frameworks then combine these two environmental objectives and a cost minimization objective into a measure that allows decision-makers to rank the desirability of different retirement strategies. These frameworks are explored to determine what each implies about the tradeoffs that must be made among objectives and among the spatial land parcel characteristics that contribute to those objectives.     

WATER-SURFACE PROFILES WITHOUT ENERGY LOSS COEFFICIENTS1

ABSTRACT: This paper describes a new method of computing water-surface profiles, which does not require the assumption of hydrostatic pressure or of roughness coefficients. The method is based upon distributing entropy production values along a channel as uniformly as boundary conditions permit. The method requires a discharge capacity rating at a channel cross-section within the limits of the reach of the channel. A new theoretical relationship between the kinetic and momentum coefficients for the velocity profile is used, together with a dynamic programming technique for optimal distribution of energy losses along the channel. A computer model was developed and was used to verify the methodology for flood flow and channel data at four locations.     

OPTIMIZATION OF MULTIPURPOSE RESERVOIR SYSTEM OPERATION1

ABSTRACT: The goal programming approach for multipurpose reservoir operation has been proposed and applied to the Bhadra reservoir system, having irrigation and hydropower production as dual purposes, in India. The objective of the model is to satisfy sequentially a series of operating criteria. Two goal programming models, one with the objective function as minimizing the deviations from storage targets and the other with the objective function as minimizing the deviations from release targets, have been formulated and applied to the reservoir system under study. The results proved that the model with release targets is preferred over the model with storage targets for determining operational policies for multipurpose reservoir system.     

河北省邯郸市地表水体景观规划浅析

现阶段城市水体的研究主要是河流的治理,而没有考虑城市水体整体的生态规划及水体生态的整体 性,根据景观规划的原则及邯郸市的现实情况,对邯郸市内的地表水体进行连接,统一管理规划,达到生态和美学统一的作用.     

Optimizing carbon sequestration in commercial forests by integrating carbon management objectives in wood supply modeling

This paper provides a methodology for generating forest management plans, which explicitly maximize carbon (C) sequestration at the forest-landscape level. This paper takes advantage of concepts first presented in a paper by Meng et al. (2003; Mitigation Adaptation Strategies Global Change 8:371–403) by integrating C-sequestration objective functions in existing wood supply models. Carbon-stock calculations performed in Woodstock^TM (RemSoft Inc.) are based on C yields generated from volume table data obtained from local Forest Development Survey plots and a series of wood volume-to-C content conversion factors specified in von Mirbach (2000). The approach is used to investigate the impact of three demonstration forest-management scenarios on the C budget in a 110,000 ha forest in south-central New Brunswick, Canada. Explicit demonstration scenarios addressed include (1) maximizing timber extraction either by clearcut or selection harvesting for greatest revenue generation, (2) maximizing total C storage in the forest landscape and in wood products generated from harvesting, and (3) maximizing C storage together with revenue generation. The level of clearcut harvesting was greatest for scenario 1 (≥15 × 10⁴ m³ of wood and ≥943 ha of land per harvesting period), and least for scenario 2 (=0 m³ per harvesting period) where selection harvesting dominated. Because softwood saw logs were worth more than pulpwood ($60 m⁻³ vs. $40 m⁻³) and were strategic to the long-term storage of C, the production of softwood saw logs exceeded the production of pulpwood in all scenarios. Selection harvesting was generally the preferred harvesting method across scenarios. Only in scenario 1 did levels of clearcut harvesting occasionally exceed those of selection harvesting, mainly in the removal of old, dilapidated stands early in the simulation (i.e., during periods 1 through 3). Scenario 2 provided the greatest total C-storage increase over 80 years (i.e., 14 × 10⁶ Mg C, or roughly 264 Mg ha⁻¹) at a cost of $111 per Mg C due to lost revenues. Scenarios 3 and 1 produced reduced storage rates of roughly 9 × 10⁶ Mg C and 3 × 10⁶ Mg C, respectively; about 64% and 22% of the total, 80-year C storage calculated in scenario 2. The bulk of the C in scenario 2 was stored in the forest, amounting to about 76% of the total C sequestered.     

计算机类学生编程素质的培养

针对计算机类学生在软件编程中出现的问题，本文就格式化编码、界面设计的一致性和清晰性、错误报告的方式与时机、交互二重性等方面进行了细致的介绍，以Visual Basic 6．x为编程语言提出了相应的解决办法，对提高计算机类专业学生的编程素质有较强的指导意义，对其他软件开发或程序设计人员也有较高的借鉴价值。     

旅游城市环境规划优化方法与应用研究(Ⅱ)昆明旅游圈环境规划优化

将IFMOPOMTCE该模型应用于昆明市旅游圈旅游环境规划优化的实例当中，取得了较为成功的效果，并采用情景分析和交互式调整的方法制定出两种方案。通过比较分析确定出适合昆明旅游业持续发展的最优发展方案，为决策者提供了科学的决策依据，从而证明了该模型的实用性和可操作性。     

The design of blanket wash solvents with environmental considerations

The search for new solvents is often driven by (a) the need to replace solvents whose continued use pose a threat to environmental health and safety, (b) the needs of new applications and processing requirements, (c) a response to changing environmental regulations and (d) a response to market demands. For example, many traditional solvents are on the environmental ‘hit list’ and are to be phased out within the next few years. In particular, cleaning solvents, which are used as blanket washes in the lithographic printing industry present a number of environmental concerns including health and safety. To respond to these concerns and more importantly to respond to rapidly changing operational requirements and market forces, there is a need for efficient and systematic strategies for ‘just in time’ optimal design of solvent alternatives. A good strategy has to consider simultaneously, performance objectives, system interactions and environmental constraints. The object of this paper is to identify and discuss the issues in the design of cleaning solvents (blanket washes) in the printing industry and how environmental and health factors can be accounted for. We do this in the context of a framework for product design. As a proof-of-concept, blanket wash solvents are designed.