Comparative evaluation of sizing of metal hydride (MH) hydrogen storage tank filled with different alloys

This study presents a comparative analysis of sizing of metal hydride tank filled with different alloys. Alloys include solid solutions and intermetallic compounds of the generic families AB₅, AB₂, AB, A₂B. The effects of the different alloys on the sizing of metal hydride hydrogen storage tanks are complicated and depend on many factors. In this paper, a thermoeconomic optimization analysis with a simple algebraic formula was presented for the estimation of optimum metal hydride tank surface area for heat transfer enhancement. The optimum area of the metal hydride tank filled with commercially available different alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) was evaluated and compared by the developed method. The optimum net savings and the value of payback were determined for four alloys. It is found that mathematical model can be employed for the determination of optimum metal hydride tank design and increasing net savings according to alloy types. The optimum areas of the tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) were calculated as 0.136, 0.130, 0.133, and 0.173 m², respectively. The optimum net savings for tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) are about 461.0, 409.3, 419.6, and 979.6 $ and the values of payback are about 1.98, 2.1, 2.17, and 1.37 years, respectively. Excessive area of the metal hydride tank would not be as economical as the optimum tank area. Thermal management of metal hydride tank must be designed for optimum points calculated at which maximum savings occur.     

Adsorption studies on coir pith for heavy metal removal

Biosorption efficiency of coir pith, a waste product from coir industry, was investigated in this study for the removal of metallic pollutants such as Ni, Cu and Zn from aqueous solutions. The disposal of coir pith is a major problem associated with the coir industries, especially working in the small-scale sector. The present study explores the effectiveness of utilization of coir pith, an accumulating waste, as a biosorbent for heavy metal removal. Batch mode studies were done to evaluate the efficiency of removal of metals under varying adsorption conditions of pH, metal concentration and contact time. Characterization studies of the biosorbent and SEM analysis were done. Kinetic modelling studies were tried using Lagergren pseudo-first-order and second-order models. Equilibrium studies were done using well-known Freundlich, Langmuir and D–R isotherm models. It was found that all isotherms are fitting well indicating the efficiency of coir pith as an adsorbent of heavy metals. The applicability of all the three isotherms to the sorption processes shows that both monolayer adsorption and heterogeneous energetic distribution of active sites on the surface of the adsorbent are possible. Due to the abundance and low cost of these materials, adsorption technologies developed can act as good sustainable options for the future in heavy metal removal from industrial effluents.     

重金属元素在冻土与融土中迁移的对比试验

随着寒区经济的发展,冻土地区的矿山开采活动不断加剧,随之产生的重金属污染问题也越来越严重.冻土地区生态环境脆弱,一旦受到破坏就很难恢复.针对此问题,室内模拟了尾矿矿渣在冻土与融土中的填埋及其对填埋场周边土体的影响,通过检测填埋场各处土壤的温度、含水量以及重金属元素的含量,发现温度和水分对重金属元素的迁移影响很大.土壤温度越低,重金属元素的迁移越慢;在温度梯度的作用下,重金属元素均随着水分从土体的暖端向冷端迁徙并聚集于冻结锋面.重金属元素在冻土中的迁移比融土中慢,表明冻土环境不利于重金属元素的迁移.在土壤质地、温度和含水量等相同的情况下,Zn的迁移性较强,Pb和Cu的迁移性相对较弱.     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。     

Price and volatility transmission between primary and scrap metal markets

The relationship between primary and scrap prices has been hypothesized for the most part as unidirectional, characterized by spillovers from primary to scrap prices. The purpose of this study is to evaluate empirically the dynamic interactions between primary and scrap metal prices through multivariate time series methods. In addition, the study expands the investigation at the level of volatility transmission, which has not been previously examined. The metal prices utilized are for copper, lead, and zinc for the period 1984–2001. The paper demonstrates differing long run and short run links. Scrap prices do not improve the long run interpretation of primary prices, but information flows from the scrap to the primary markets exist in the short run. Additionally, the copper and lead markets exhibit bidirectional information flows in terms of volatility transmission. The analysis provides valuable insight into the interactions of the primary and scrap metal sectors which can be used to improve forecasting and planning.     

液-固流化床回收印刷线路板中金属的研究

根据废弃印刷线路板中材料密度不同,采用水介质流化床对印刷线路板粉末中的金属进行回收,对0.25～0.177、0.177～0.104、0.104～0.074和-0.074 mm 4个粒级范围内的物料进行分选试验。试验结果表明,在上述4个粒级范围内,随介质流速的增大,金属回收率降低;金属回收率η与实际操作速度（ua）和颗粒终端沉降速度（ut）的比值φ（ua/ut）存在一定线性关系,分析模拟了η与φ之间的相关性方程,外推试验的结果证明了相关性方程的可靠性;在合适的操作条件下,各粒级范围内金属的回收率分别为95.02%、90.07%、87.5%和92.68%。     

微量金属元素及其配合物对厨余垃圾甲烷发酵的影响

生物可利用的微量金属元素不仅能够保证污染物以最大的速率转化,而且还可以使某些特殊的转化得以发生,并提高微生物对有毒污染物质的耐受能力。在研究厨余垃圾总固体浓度(total solid, TS)、接种量和C/N比对厨余垃圾厌氧发酵影响的基础上,重点探讨微量金属元素钴及其配合物丝氨酸对厨余垃圾厌氧发酵甲烷产量及关键酶含量的影响。结果表明,当TS为0.5%、接种污泥量为100 mL/L和C/N比为20∶1时,厨余垃圾厌氧发酵的甲烷产率较高,为367 mL/g COD;添加2 μmol/L的微量金属元素钴-配合物丝氨酸时,甲烷产率则提高到432 mL/g COD,相应地,辅酶M的含量由空白实验的41.21 μmol/g VSS提高到54.64 μmol/g VSS,辅酶F₄₂₀的含量由0.31 μmol/g VSS提高到0.48 μmol/g VSS。     

赭石对模拟重金属废水的吸附效果研究

采用模拟重金属废水的正交试验设计,进行赭石对模拟重金属废水的吸附效果研究,探讨pH、赭石加入量和振荡时间等影响因素对吸附效果的影响。结果表明,在一定pH、赭石加入量和振荡时间条件下,赭石对6种重金属（Pb、Cd、Mn、Zn、Cr和Ni）均有较好吸附效果,对Pb、Cd、Mn、Zn和Cr的最大吸附率可达100%,对Ni的吸附率达8963%。处理后废水中重金属达到污水排放标准。各影响因素对Mn、Zn和Cr吸附效率的影响大小表现为：pH＞赭石加入量＞振荡时间,Ni和Cd表现为：赭石加入量＞pH＞振荡时间,Pb表现为：pH＞振荡时间＞赭石加入量。赭石对废水中重金属吸附的最佳条件为赭石加入量40 g/L,pH 10～10.5,振荡时间2 h。     

金属非金属矿山企业如何推进安全生产标准化考评工作

通过典型企业推进安全标准化考评工作的研究成果,探讨了企业在开展安全标准化考评工作过程中所需遵循的步骤和相关要求,分析了考评工作过程中各阶段需要建设的内容和形式要求,给出了各阶段所需的工作时间.     

太湖沉积物重金属污染及生态风险性评价

对1993年～1999年所采集的太湖表层沉积物中重金属含量进行了统计分析和生态风险性评价.结果表明,太湖沉积物的pH值呈中性至弱碱性,较适合于沉积物中粘土矿物及腐殖质对重金属的吸附;太湖大部分地区沉积物未受到重金属污染,且沉积物中重金属处于安全状态.沉积物生态风险性指数评价结果也表明,太湖大部分地区目前无重金属生态危害.