Sustainable pattern analysis of a publicly owned Material Recovery Facility in a fast-growing urban setting under uncertainty

Sustainable development goals are achievable through the installation of Material Recovery Facilities (MRFs) in certain solid waste management systems, especially those in rapidly expanding multi-district urban areas. MRFs are a cost-effective alternative when curbside recycling does not demonstrate long-term success. Previous capacity planning uses mixed integer programming optimization for the urban center of the city of San Antonio, Texas to establish that a publicly owned material recovery facility is preferable to a privatized facility. As a companion study, this analysis demonstrates that a MRF alleviates economic, political, and social pressures facing solid waste management under uncertainty. It explores the impact of uncertainty in decision alternatives in an urban environmental system. From this unique angle, waste generation, incidence of recyclables in the waste stream, routing distances, recycling participation, and other planning components are taken as intervals to expand upon previous deterministic integer-programming models. The information incorporated into the optimization objectives includes economic impacts for recycling income and cost components in waste management. The constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening restrictions. Due to the fragmented data set, a grey integer programming modeling approach quantifies the consequences of inexact information as it propagates through the final solutions in the optimization process. The grey algorithm screens optimal shipping patterns and an ideal MRF location and capacity. Two case settings compare MRF selection policies where optimal solutions exemplify the value of grey programming in the context of integrated solid waste management.     

采油厂HSE监督检查管理系统创建实践研究

本文根据采油厂生产过程风险特点,以生产单元为对象,通过建立全员参与的HSE监督检查体系,实现对采油厂HSE监督检查标准的统一规范,利用开发的HSE监督检查信息集成平台,创建完成采油厂HSE监督检查管理系统。在大庆油田第五采油厂的应用实践显示,其能为采油厂带来巨大的风险管理效益,是全面落实直线与属地HSE责任的有效载体。对于采油厂有效实施HSE监督检查具有重大意义,是HSE管理制度的一种创新。     

Material flow analysis of lubricating oil use in California

Petroleum lubricating oils, used throughout the economy, are distinct among petroleum products in their capacity to be recovered and recycled at the end of their useful life. Used lubricating oil is regulated at the state and federal level because of concerns about environmental impacts arising from improper disposal, although rates of recovery are not known. We present a material flow analysis of lubricants through California's economy in the years 2007–2012. We introduce a novel technique for computing aggregate waste generation from a collection of hazardous waste manifest records, and apply it in order to determine a recovery rate for used oil and to estimate the quantity of oil managed informally in the state. The records also offer a detailed view of the fate of used oils after they are recovered. We find that around 62% of lubricants are recoverable at end of life, of which 70–80% is being recovered. This rate shows a slight downward trend. If the trend is accurate, measures should be taken to improve the performance of the used oil management system. Policy opportunities exist to reduce the quantity of oil managed informally through improving access to responsible used oil management methods. These include increasing the collection of used oil from industrial sources as well as “do it yourself” oil changes, expanding in-state reprocessing capacity, and promoting increased out-of-state reprocessing of used oil. Our methods introduce new possibilities to make use of direct observation in material flow analysis, potentially improving data availability and quality and increasing the relevance of material flow methods in policy applications.     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

Valorisation of used cooking oil sludge by codigestion with swine manure

The addition of lipid wastes to the digestion of swine manure was studied as a means of increasing biogas production. Lipid waste was obtained from a biodiesel plant where used cooking oil is the feedstock. Digestion of this co-substrate was proposed as a way of valorising residual streams from the process of biodiesel production and to integrate the digestion process into the biorefinery concept.Batch digestion tests were performed at different co-digesting proportions obtaining as a result an increase in biogas production with the increase in the amount of co-substrate added to the mixture. Semi-continuous digestion was studied at a 7% (w/w) mass fraction of total solids. Co-digestion was successful at a hydraulic retention time (HRT) of 50 d but a decrease to 30 d resulted in a decrease in specific gas production and accumulation of volatile and long chain fatty acids. The CH₄ yield obtained was 326 ± 46 l/kg VS_feed at an HRT of 50 d, while this value was reduced to 274 ± 43 l/kg VS_feed when evaluated at an HRT of 30 d. However these values were higher than the one obtained under batch conditions (266 ± 40 l/kg VS_feed), thus indicating the need of acclimation to the co-substrate. Despite of operating at low organic loading rate (OLR), measurements from respirometry assays of digestate samples (at an HRT of 50 d) suggested that the effluent could not be directly applied to the soil as fertiliser and might have a negative effect over soil or crops.     

坡岸截留强化处理设施在不同运行条件下对农业面源污染物去除效果

对坡岸截留强化处理设施在不同温度、不同雨强、不同降雨间隔条件下处理农业面源污染进行中试试验研究.结果表明,水温从20℃下降至4.3℃,COD、TN、NH+4-N、TP去除率下降了15.58%、48.93%、42.26%、57.75%;降雨强度由0.65mm·min-1增加1倍至1.30 mm·min-1,COD的平均去除率低了15.19%,TN、NH+4-N的去除效率相当,TP的去除效率提高了11.21%,但COD、TN、NH+4-N、TP单位面积去除的总量却提高了26.27%、68.3%、32.6%、104.2%;降雨间隔从2 d增加到4 d时对COD去除的影响不大,但使NH+4-N、TN的处理效率提高19.31%、13.95%,对TP的单位面积去除量提高71.43%,但去除总量有限.     

典型生活垃圾处理设施恶臭排放特征及污染评价

为研究生活垃圾处理设施恶臭污染排放特征,分别在北京市生活垃圾填埋、焚烧、堆肥3种工艺的前处理车间采集恶臭样品,利用冷阱富集-气质联用(GC/MS)技术对恶臭气体进行分析.结果表明,检测到的恶臭物质主要分为6大类:芳香烃化合物、硫化物、卤代物、烯烃、烷烃和含氧有机物.其中,填埋工艺的前处理车间共检测出50种物质,质量浓度为100.069mg·m~(-3),理论臭气浓度OU_T为350.611,综合臭气指数N为25.448.焚烧工艺的前处理车间共检测出55种物质,质量浓度为36.052 mg·m~(-3),理论臭气浓度OU_T为141.434,综合臭气指数N为21.506.堆肥工艺的前处理车间共检测出34种物质,质量浓度为25.382 mg·m~(-3),理论臭气浓度OU_T为27.547,综合臭气指数N为14.401.利用阈稀释倍数的恶臭贡献值计算方法,初步识别填埋工艺的前处理车间特征恶臭污染物质为:二甲二硫醚、乙酸丁酯、对二乙苯和乙醇;焚烧工艺的前处理车间特征恶臭污染物质为:甲硫醇、二甲二硫醚、乙醇和柠檬烯;堆肥工艺的前处理车间特征恶臭污染物质为:乙醇、二甲二硫醚、乙酸丁酯和柠檬烯.     

变电站污水处理现状与展望

变电站一般位于城市郊区或乡村环境等市政设施尚不完善的区域,无法接入市政污水管网,许多变电站粗放式的污水处理方式无法满足环保要求.随着变电站智能化水平的提高,站内工作人员越来越少,传统的污水处理方式无法适应新形势下变电站内污水处理要求.因此,针对变电站粗放式的污水管理方式及新条件下传统污水处理方式等不满足环保要求的问题,根据站址外环境创新变电站污水处理方式成为关键.通过对变电站既有污水处理方式的研究,结合变电站智能化的发展进程,进行总结,可为变电站污水处理设计或水环境管理提供参考.     

野外环境生长的薰衣草精油抑菌作用测定方法比较研究

采用滤纸片法和混合法对野外环境生长的薰衣草精油的抑菌作用进行了研究,并对两种试验方法进行了比较,测定了最小抑菌浓度(MIC)与最小杀菌浓度(MBC),以期充分发挥薰衣草精油的抑菌作用.滤纸片法结果表明:薰衣草精油对多数实验菌都有抑菌作用,对枯草杆菌则未表现出抑制作用;混合法实验显示:薰衣草精油对实验菌均有抑菌作用,精油浓度与抑菌作用成线性相关,抑菌作用较滤纸片法效果更好.在使用时,可用于表面喷涂、熏蒸,还可将精油作为安全的食品添加剂,提高食品的保鲜效果,保证其品质.     

活化温度对SCAC制备过程中副产物生成规律的影响

文章研究了污泥-玉米芯活性炭(SCAC)制备过程中,活化温度对副产物(热解气和热解油)生成规律的影响。热解气和热解油分别采用气相色谱仪和气质联用仪进行分析检测。试验结果表明,随着活化温度的升高,SCAC的产量逐渐降低,热解气与热解油的产量则随之增多。不同温度条件下,热解气的主要成分均为H2和CO2,热解气中H2所占的体积百分数随着活化温度的升高而增加,而CO2则相应降低。此外,热解气中CH4的含量也会随着活化温度的上升而略有提高,说明较高的活化温度更有利于热解气的资源利用。热解油组分较为复杂,每个温度条件下的液态产物都包括上百种化合物,可分为烷烃,烯烃,苯类,酚类,腈类,杂环化合物,多环芳烃,有机酸,酰胺,酯类,甾体,醇,酮以及其他类共14大类型,其中以有机酸、腈类和甾体类有机物含量居多。随着活化温度的升高,有机酸和多环芳烃的含量有所增加,而酚类化合物的含量则有所降低;当活化温度升高至650℃以上时,甾体类有机物含量明显降低。