Metal concentrations in used engine oils: Relevance to site assessments of soils

Used engine oils contain metals, which upon entering soils may pose risks to human health or the environment. In this study, previously published concentrations of 23 metals in 213 used engine oil samples from the early 1970s to the mid-1990s are statistically evaluated. Neat (100%) used engine oils were found to contain relatively high concentrations of lead, calcium, and zinc, attributable to piston blow-by of leaded gasoline, calcium salt detergent additives, and zinc-bearing anti-corrosion/anti-oxidation additives, respectively. Wear metal concentrations were lower. The lead concentration in used engine oils in the U.S. declined between the 1970s and early 1990s, potentially providing a basis to constrain the “age” of used engine oil(s) in soils. The concentrations of 23 metals in used engine oils were compared to soil risk benchmarks in 15 representative jurisdictions in the U.S., Canada, Australia, and Europe. The maximum concentrations in neat (100%) used engine oil of eight metals – Be, Co, Fe, Mn, Ni, Se, Ag, and Ti – were lower than their collective minimum benchmarks in soils for the jurisdictions surveyed, indicating their concentrations in soils could not be reasonably expected to exceed any soil benchmarks. Nine metals (As, Ba, Cd, Cr, Cu, Pb, Sn, V and Zn), but particularly arsenic, cadmium, lead, tin, and zinc, were identified as potential contaminants of concern (PCOC) for soils from locations impacted with used engine oils, owing to their higher median concentrations (i.e., 2.5, 1.4, 1038, 5.0, and 922 mg/kg in oil, respectively) relative to most soil benchmarks. Site-specific benchmarks and metal concentrations at reasonable oil in soil concentrations require consideration when developing the suite of PCOC metal analytes for conducting site assessments of soils impacted by used engine oil.     

基于TVR的腐蚀油气管道失效概率及安全寿命研究

为避免因腐蚀导致油气管道失效,针对因管道特性和腐蚀尺寸的不确定性使得管道剩余强度成为概率模型的特点,建立了腐蚀管道强度损失随机模型;借助可靠性理论,通过分析管道腐蚀进程的时变性特点,将管道系统由损伤积累和抗力衰减导致的剩余强度随机化;提出基于穿越率的腐蚀油气管道失效评定及安全寿命预测方法。研究结果表明:腐蚀速率和运行压力对管道失效概率及安全寿命影响显著,管道尺寸影响适中,而相关系数和拉伸强度影响较小;若腐蚀速率Va=0.2 mm/a,VL=10 mm/a或局部腐蚀缺陷半径达到管道壁厚的0.5倍时,建议作为重点风险段监测并检修。所建方法是对腐蚀油气管道运营监控和风险评估的有益补充。     

高效石油烃降解菌的筛选及其对原油污染土壤的修复

从陕北原油污染土壤中筛选出7株高效石油烃降解菌,其中黄杆菌属CC-2、不动细菌属SC-5、假单胞菌属SC-6表现出较强的石油烃降解能力。通过单因素试验和正交试验考察总石油烃(TPH)降解效果的影响因素,得出各因素对TPH降解率影响程度的大小次序为:溶液p H降解温度降解菌接种量摇床转速,且在降解菌接种量为7%(φ)、溶液p H为7、降解温度为30℃、摇床转速为150 r/min的最适处理条件下,菌株SC-6的TPH降解率可达61.23%。原油污染土壤生物修复实验结果表明:高效石油烃降解菌的投加有利于土壤TPH降解率和酶活性的提高;"菌株SC-6+营养剂"组修复处理42 d后的TPH降解率可达57.59%。     

海上含聚污水电化学处理装置的优化

为解决传统电化学方法在含聚污水处理时电极板消耗严重、絮渣量大的问题,通过改进电极板材料、组合数及结构等,研究适度降解-除油一体化电化学技术,在降低渣泥量的同时保证处理效果。实验结果表明:最佳电极板组合为"网状惰性金属复合物极板(阳)-网状铝极板(阴)-网状铝极板(阴)-网状惰性金属复合物极板(阳)";在电解电流为4.0 A、极板间距为8.0 cm、面体比(电极板面积与处理污水量的比值)为2/17 cm~2/mL、电解时间为30 min的最佳处理条件下,几乎无絮渣产出,含聚污水的浊度去除率为93.3%、聚合物降解率为92.0%、除油率为95.0%,展现了优良的处理效果。     

Free market ideology and deregulation in Colorado’s oil fields: Evidence for triple movement activism?

Unconventional oil and gas extraction (UOGE) has spurred an unprecedented boom in onshore production in the US. Despite a surge in related research, a void exists regarding inquiries into policy outcomes and perceptions. To address this, support for federal regulatory exemptions for UOGE is examined using survey data collected in 2015 from two Northern Colorado communities. Current regulatory exemptions for UOGE can be understood as components of broader societal processes of neoliberalization. Free market ideology increases public support for federal regulatory exemptions for UOGE. Perceived negative impacts do not necessarily drive people to support increased federal regulation. Utilizing neo-Polanyian theory, interaction between free market ideology and perceived negative impacts is explored. Free market ideology appears to moderate people’s views of regulation: increasing the effect of perceived negative impacts while simultaneously increasing support for deregulation. To conclude, the ways in which free market ideology might normalize the impacts of UOGE activity are discussed.     

Assessing stress response of Stylophora pistillata towards oil and phosphate pollution in the Gulf of Aqaba,using molecular and biochemical markers

Crude oil (from oil terminal) and raw phosphate (from phosphate port) pollution are responsible for the lowered health conditions of coral reefs at their vicinity in the Jordanian coast of the Gulf of Aqaba. Both in situ incubations and ex situ laboratory exposure experiments were used to study the effects of those pollutants on corals, by using molecular and biochemical biomarkers in the coral Stylophora pistillata. For ex situ part of the experiment, crude oil and raw phosphate were added to a final concentration of 500?ppm for both pollutants. The DNA damage was assessed by Comet assay, while biochemical stress markers were reassessed by lipid peroxidation (LPO) test. Although the corals looked healthy from outside, the use of stress biomarkers indicated that they are under high pressure at the cellular level. The corals incubated with oil and phosphate had more DNA damage and LPO in comparison with the control samples. The results obtained suggest that the use of stress biomarkers can be used as important prognostic tools for examining the sub-lethal stress on corals before their death.     

Producing biodiesel from waste animal oil by modified ZnO

Biodiesel produced by transesterification of waste animal oil is a promising green fuel in the future. ZnO-Al₂O₃ and ZnO/Zn₂Al composition oxides were prepared by co-precipitation method and impregnation method, respectively. The above catalysts were characterized by X-ray diffraction (XRD), Brunauer--Emmett--Teller (BET) and CO₂ adsorption and temperature-programmed desorption (CO₂-TPD) and show that the high activity for the catalyst is attributed to its high alkalinity. The reaction parameters were optimized and the results show that the transesterification ratio of waste animal oil can reach 98.7% with 10% ZnO/Zn₂Al catalyst after 2 h. Moreover, 10%ZnO/Zn₂Al compound oxides can be active for the successive cycles. The glycerol as a predominant by-product after transesterification is of high purity with high use value.     

新型吸附材料AGS在油气回收中的应用

考查了自制疏水性硅胶吸附材料AGS在加油站模拟油气回收装置及某油库现场油气回收装置的应用效果,并与常用的柱状活性炭进行了比较。实验结果表明：与活柱状性炭相比,AGS对油气的吸附速率和吸附量较小,但是油气脱附效果更好;将二者混合得到的吸附材料同时具备二者的优点,既具有较高的油气吸附量又具有良好的脱附性能,使油气回收装置具有更大的油气吸附量和更好的回收效果。     

UASB-SBR-絮凝工艺处理地沟油制生物柴油废水

采用UASB-SBR-絮凝工艺处理地沟油制生物柴油废水,考察了各个阶段的废水处理效果。实验结果表明：UASB稳定运行阶段进水COD约为15000mg/L时,COD去除率约为87%,出水COD在2500mg/L以下,出水挥发性脂肪酸（VFA）浓度为4~6mmol/L,最佳容积负荷为15.0kg/（m3·d）;采用SBR处理UASB出水,当容积负荷为1.5kg/（m3·d）时,出水COD在200mg/L以下,COD去除率在83%以上,ρ（NH₃-N）在5mg/L以下,TP约为25mg/L。向SBR出水中加入质量分数为5%的聚合氯化铝进行化学除磷,加入量为5mL/L,处理后废水TP为4~6mg/L。处理后废水的COD,ρ（NH₃-N）,TP均达到CJ343-2010《污水排入城市下水道水质标准》的A类要求。     

生活垃圾催化热解液体产物特性

为探索生活垃圾催化热解液体产物特性变化规律,选取Na2CO3、CaO、Fe2O33种催化剂,利用固定床实验、红外分析(FT-IR)进行生活垃圾热解液体产物产率和组分特性研究.结果表明,热解终温600℃无催化剂时,生活垃圾热解液产率为39.80 wt％,添加3种催化剂后热解液产率均降低;生活垃圾分别添加1％的Na2CO3和CaO后,热解油氧含量由22.49％分别降低到20.12％和18.53％,低位热值由30.30 MJ/kg分别提高到33.79和32.74 MJ/kg;无催化剂时热解油成分为脂肪类、含氧化合物及少量芳香类混合物,加催化剂后热解油中芳香类物质峰面积比例显著增加,而含氧化合物峰面积比例降低,羟基类及羧酸类含氧化合物峰面积比例明显减少,其他含氧物峰面积比例却增加;CaO催化效果较明显,生活垃圾添加1％的CaO热解油中芳香类物质峰面积比例从4.36％增加到29.46％,含氧化合物峰面积比例由49.42％降低到23.12％,其中羟基类和羧酸类化合物峰面积比例分别由34.03％和10.65％降低到0.00％和3.34％,其他含氧化合物峰面积比例由4.73％增加到19.77％.