加油站三次油气回收技术现状分析与性能提升技术研究

针对近年来加油站三次油气回收设备排放频繁超标的问题,对加油站已投用的三次油气回收设备进行调研分析,找出导致三次油气回收设备排放超标的原因,通过数据模拟对相关结论进行验证,提出解决三次油气回收设备超标排放问题的技术提升措施。     

吉林省采油厂原油含水率分析仪工作场所辐射防护水平调查及分析

通过系统的监测了解吉林地区采油厂原油含水率分析仪的工作场所放射防护现状,为放射源监督管理部门提供参考依据,为保护环境、保护放射工作人员职业健康提供重要保障,为采油厂对辐射装置管理及措施提供依据.采用国家规定的标准方法对吉林省不同工作环境下的5家采油厂的45台原油含水率分析仪的周围剂量当量进行现场监测,对涉及接触原油含水...     

基于Shear Damage模型的剪切闸板防喷器剪切性能研究

为揭示剪切闸板在纯剪切工况条件下(无压差、无悬重)剪切钻杆时剪切力特征,以及悬重、内外压差等复杂工况条件对剪切钻杆时剪切力和油压的影响规律。本文基于Shear Damage断裂损伤模型,通过显示动力学方法开展剪切过程仿真研究。研究结果表明：在纯剪切工况条件下,剪切力随时间增加先逐渐增加再急剧下降为0;在有悬重工况条件下,剪切力和油压随悬重增加而呈减小趋势;在钻杆内压大于外压工况条件下,剪切力和油压均随压差增大而增大;在钻杆内压小于外压工况条件下,剪切力随压差增大而减小,5in(壁厚14.50 mm)、5 in(壁厚12.70 mm)规格钻杆油压随压差增大呈先增加后减小趋势,5in(壁厚10.54 mm)规格钻杆油压随压差变化不明显,其余钻杆油压随压差增大均呈上升趋势。研究结果可为剪切闸板防喷器油压配置、结构优化、关井工艺改进等提供关键技术支撑。     

System failure probability evaluation using fault tree analysis and expert opinions in intuitionistic fuzzy environment

In quantitative fault tree analysis of a system, exact failure probability values of components are utilized to calculate the failure probability of the system. However, in many real world problems, it is problematic to get precise and sufficient failure data of system components due to insufficient or imprecise information about components, changing environment or new components. A methodology has already been developed by employing fuzzy set theory for the system reliability evaluation by utilizing qualitative failure data of system components when quantitative failure data of components are inaccessible or insufficient. This paper extends the concept of fuzzy set to intuitionistic fuzzy set and proposes a novel approach to evaluate system failure probability using intuitionistic fuzzy fault tree analysis with qualitative failure data of system components. The qualitative failure data such as expert opinions are collected as linguistic terms. These linguistic terms are then quantified by triangular intuitionistic fuzzy numbers in form of membership function and non-membership function. Additionally, a method is developed for combining the different opinions of experts. To illustrate the applicability of proposed approach, a case study of the crude oil tank fire and explosion accident is performed. The obtained results are very close to the results from pre-existing approaches which confirm that the proposed approach is a more realistic alternative for the study of system reliability in intuitionistic fuzzy environment when quantitative failure data of system components are not known. To help decision makers for improving the security execution of the crude oil tank system, importance measures including Fussell-Vesely importance and cut sets importance are also executed.     

不饱和聚酯树脂在储罐内衬改造中的静电危害分析

为分析不饱和聚酯树脂在内衬改造应用中存在的引燃风险,阐述加油站埋地罐内衬改造工艺,测试不饱和聚酯树脂固化放热特性、与玻璃钢摩擦的滚刷及装树脂绝缘桶的表面静电电位。结果表明:不饱和聚酯树脂与固化剂混合后的放热不足以引起树脂自燃;滚刷、树脂与绝缘桶间摩擦可导致桶表面静电位超过7 kV,带电绝缘体表面与金属凸出物间存在静电放电现象、甚至引起挥发苯乙烯局部闪燃风险。油罐内衬改造时需强化通风以及增加静电防护措施,避免静电放电引起罐内燃爆事故。     

Modelling ice and wax formation in a pipeline in the Arctic environment

In the Arctic environment, the fluid temperature in the pipeline can drop below the freezing point of water, which causes wax and ice to form on the pipeline surface. Solid formation on the pipeline surface can lead to flow assurance and process safety issues, such as blockage of the pipeline, pipeline component failure, and release of hazardous liquid. Remediating the plugging requires a shutdown of pipeline operation, which incurs tremendous cost and delays the entire production system. In order to prevent blockage, the pigging operation can be used to remove the deposits on the pipeline surface on a regular interval. Ice and wax depositions in the pipeline are a slow process. However, if the deposition grows too thick, pipeline blockage can still occur after pigging operation. So, ice and wax deposition rates are required to be estimated accurately. This paper investigates ice and wax deposition rates in a 90,000 m pipeline. A fundamental model for both ice and wax deposition is proposed using the first principles of heat and mass transfer.     

Critical aspects for collision induced oil spill response and recovery system in ice conditions: A model-based analysis

The recovery effectiveness for oil spills in ice conditions depends on a complex system and has not been studied in depth, especially not from a system risk control perspective. This paper aims to identify the critical aspects in the oil spill system to enable effective oil spill recovery. First, a method is developed to identify critical elements in a Bayesian Network model, based on an uncertainty-based risk perspective. The method accounts for sensitivity and the strength of evidence, which are assessed for the different Bayesian Network model features. Then, a Bayesian Network model for the mechanical oil spill recovery system is developed for the Finnish oil spill response fleet, contextualized for representative collision accident scenarios. This model combines information about representative sea ice conditions, ship-ship collisions and their associated oil outflow, the oil dispersion and spreading in the ice conditions, and the oil spill response and recovery of the fleet. Finally, the critical factors are identified by applying the proposed method to the developed oil spill response system model. The identified most critical system factors relates collision aspect: Forcing Representative Scenario, Representative Accident Location, Impact Speed, Impact Location, Impact Angle and response aspect: Response Vessel Operability.     

风电机舱内典型混合液态油品热诱导燃烧特性

为探究不同尺寸方形油盘对双馈异步风力发电机组机舱中典型混合油品燃烧特性的影响,自主设计和搭建了热平板诱导油品加热燃烧测定实验系统。将液压油(CALTEXRANDO HDZ32)和齿轮箱油(CALTEXMEROPA320)按1∶1质量(各40.0g)比例均匀混合后,盛装于横截面尺寸分别为6.5cm×6.5cm、10.0cm×10.0cm、13.5cm×13.5cm 的钢制油盘中,利用热平板加热和诱导盘内同样质量混合油品燃烧,利用摄像机记录其燃烧行为和阶段节点时间,利用热电偶树、温度采集模块对油品燃烧对应阶段节点液内和上方火焰中心轴温度分布进行测定。观察发现,液/齿混合油品在加热后出现液内流动、蒸发、冒泡、气化、燃烧、发烟、火焰蹿高等典型传热传质和液相燃烧现象。实验结果表明,随油盘横截面尺寸递增,混合油品着火时间依次缩短(最高1048.0s),燃烧持续时间依次递减(最高1980.0s),燃烧液内最高温度依次升高(最高564.3 ℃),中心轴第一层火焰熄灭温度依次升高(最高489.2 ℃)。小尺寸油盘内油品交流换热过程缓慢,质量损失速率较低,着火前阶段出现最大质量损失速率(0.041g/s);中大尺寸油盘内对流、传质和传热过程明显增强,质量损失速率较高,火焰蹿高节点时出现最大质量损失速率(0.25g/s和0.29g/s)     

南海北部海域油气勘探保障建设选址适宜性研究

为分析南海北部海域油气勘探保障建设选址的适宜性,在广泛研究备选区特征资料的基础上,基于层次分析法(Analytic Hierarchy Process, AHP)原理,以自然环境因素、开发环境因素、基础设施与投资情况以及其他因素作为一级评判准则,建立了包括12项二级评判准则的递进层次结构模型,并以永兴岛、赵述岛和晋卿岛作为3个假定备选区,来验证分析评价模型的有效性和可靠性。AHP评判结果显示,3个备选区的整体优劣指数依次为0.587 1, 0.212 1, 0.200 8;AHP模型的一致性比例CR值为0.020 3。通过分析和筛选影响远海油气勘探保障建设的选址因子,构建基于AHP原理的选址评价模型,可用于分析评价南海北部岛礁油气勘探保障建设选址的适宜性。     

Accelerated ash accumulation method for diesel particulate filter and its characterization: a review

ABSTRACT

It is well known that high-efficiency wall-flow particulate filter is the most commonly used technology that can effectively reduce both particulate matter (PM) and particulate number (PN) to comply with the latest emission legislations. Ash, defined as the noncombustible, non-evaporative residue derived mostly from lubricants, has critical impact on engine backpressure, particulate filter filtration efficiency and durability performance, therefore, the investigation of ash impact on particulate filter is of great importance. Due to cost-saving potential, several published methods from different laboratories for accelerated ash loading under carefully controlled conditions are described in this review, including some characterization methods that have been used for the evaluation of filter performance. In addition, the impact of ash deposit on back pressure and regeneration performance are also discussed in this review.