印染废水污染物在曝气生物滤池中的沿程去除规律

主要研究了曝气生物滤池（BAF）对印染废水中污染物的沿程去除规律。研究表明：BAF对印染废水污染物的去除沿高程有着不同的变化规律：在BAF总高度为300 cm,填料层高度为200 cm,气水比3∶1,停留时间11.8 h,的情况下, BAF对COD的去除主要集中在<160 cm的填料层部分,在总的去除率为63.1%时,此区域去除率可达56.60%;对NH3N的去除主要集中在填料层100～160 cm段,在总NH₃-N去除率为85.09%时,此区域NH₃-N去除率达38.28%。BAF对浊度的去除主要集中在填料层小于100 cm的部分,在总去除率为94.04%,区域去除率达到61.90%。印染废水经过BAF的前100 cm填料层后,pH值由10降至7.6后基本维持不变。     

BPA暴露对本体和子代胰岛β细胞转录组差异对比分析

双酚A(BPA)作为一种典型的环境内分泌干扰物,与二型糖尿病和肥胖症等代谢类疾病密切相关.在这项研究中,旨在探讨BPA直接暴露以及围产期暴露对本体和子代胰岛β细胞影响的差异,从而实现对不同易感人群的精准预防与治疗.通过对GEO数据库中GSE126297和GSE82175两个数据集进行分析,共筛选出108个共有的差异基因...     

Communication ecology of webbing clothes moth: 4. Identification of male- and female-produced pheromones

Summary. We investigated the hypothesis that aggregation signals produced by male webbing clothes moths (WCM), Tineola bisselliella (Hum.) (Lepidoptera: Tineidae), and close-range male attractant signals produced by females have a pheromonal basis, at least in part. Gas chromatographic-electroantennographic detection (GC-EAD) and GC-mass spectrometric analyses of bioactive methanolic extracts of male WCM disclosed three candidate pheromone components: hexadecanoic acid methyl ester (16:Ester), (Z)-9-hexadecenoic acid methyl ester (Z9—16:Ester), and octadecanoic acid methyl ester (18:Ester). In bioassay experiments in a large Plexiglas™ arena, a blend of synthetic 16:Ester plus Z9—16:Ester was attractive to male and virgin (but not mated) female WCM; the 18:Ester was inactive. GC-EAD analyses of pheromone gland extracts from female WCM revealed (E,Z)-2,13-octadecadienal (E2Z13—18:Ald) and (E,Z)-2,13-octadecadienol (E2Z13—18:OH) as candidate sex pheromone components. In arena bioassay experiments, 1—5 female equivalents of synthetic E2Z13—18:Ald (0.2 ng) and E2Z13—18:OH (0.1 ng) were more attractive to male WCM than were two virgin female WCM. We anticipate that the combination of aggregation and sex pheromones, male-produced sonic aggregation signals, and habitat-derived semiochemicals will be highly effective in attracting male and female WCM to commercial traps. Received 12 January 2001; accepted 8 June 2001.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

A Cumulative Energy Demand indicator (CED), life cycle based,for industrial waste management decision making

Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications.In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented.One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making.The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.     

Book Reviews

Books reviewed:
Tim Dyson, Population and Food: Global Trends and Future Prospects
R. S. J. Sparks, M. I. Bursik, S. N. Carey, J. S. Gilbert, L. S. Glaze, H. Sigurdsson and A. W. Woods, Volcanic Plumes
Jasper Becker, Hungry Ghosts: Mao's Secret Famine
Dali L. Yang, Calamity and Reform in China: State, Rural Society and Institutional Change Since the Great Leap Forward     

CFD simulation of MSW combustion and SNCR in a commercial incinerator

A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH₂)₂) and NO_x. The in-bed calculations provided 2-D profiles of the gas–solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NO_x concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NO_x reduction and reasonable NH₃ slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.     

Policy implementation of the Republic Act (RA) No. 9003 in the Philippines: A case study of Cebu city

Municipal Solid Waste Management (MSWM) is considered to be one of the most serious environmental issues in the Philippines. The annual waste generation was estimated at 10.6 million tonnes in 2012 and this is expected to double in 2025. The Republic Act (RA) No. 9003, widely known as the Ecological Solid Waste Management Act of 2000, provides the required policy framework, institutional mechanisms and mandate to the Local Government Units (LGUs) to achieve 25% waste reduction target through establishing an integrated solid waste management plan based on the 3Rs (reduce, reuse and recycling). Although the initial impact of the LGUs is still very limited in implementing the national mandate, this article highlights the successful experiences of Cebu, the second largest city in the Philippines, in reducing its MSW generation by more than 30% in the past three years. This study also explores the implementation process, innovative actions taken by the Cebu City Government in implementing the national mandate at local level and identifies the factors that influence the policy implementation. The findings suggest that the impacts of the national mandate can be achieved if the LGUs have the high degree of political commitment, planning and development of effective local strategies in a collaborative manner to meet with local conditions, partnership building with other stakeholders, capacity development, adequate financing and incentives, and in the close monitoring and evaluation of performance.     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.