Impact Resistance of Materials for Guards on Cutting Machine Tools—Requirements in Future European Safety Standards

Guards on machine tools are meant to protect operators from injuries caused by tools, workpieces, and fragments hurled out of the machine’s working zone. This article presents the impact resistance requirements, which guards according to European safety standards for machine tools must satisfy. Based upon these standards the impact resistance of different guard materials was determined using cylindrical steel projectiles. Polycarbonate proves to be a suitable material for vision panels because of its high energy absorption capacity. The impact resistance of 8-mm thick polycarbonate is roughly equal to that of a 3-mm thick steel sheet Fe P01. The limited ageing stability, however, makes it necessary to protect poycarbonate against cooling lubricants by means of additional panes on both sides.     

Oil-Induced environmental Kuznets curve in organization of petroleum exporting countries (OPEC)

This study investigates the environmental Kuznets curve (EKC) hypothesis in 10 of the Organization of Petroleum Exporting Countries (OPEC). To realize the study’s aims a time series model is built based on the period 1977–2008, utilizing the ecological footprint as an environmental indicator and income, labour, capital, oil consumption and oil price as economic indicators. Employing the Autoregressive Distributed Lag (ARDL) approach, by comparing the short and long-run income elasticities, the EKC hypothesis is present in six OPEC countries namely Algeria, Iraq, Venezuela, Nigeria, Qatar and Kuwait. Moreover, the Toda–Yamamoto–Dolado–Lütkepohl (TYDL) causality tests outcome show that, after oil consumption, the most significant factors in increasing ecological footprint are labor and capital. This implies the relocation of pollution intensive industries to almost all of the OPEC countries. However, oil prices reduce environmental damage by its negative effect on the ecological footprint. From the outcome of this study it is important for the investigated countries to reduce their consumption of fossil fuel energy since it represents an important source of pollution. This can be achieved by allocating more labor and capital in projects and investments on renewable energy, energy efficiency and energy saving.     

Nuclear Weapons Tests and Environmental Consequences: A Global Perspective

The beginning of the atomic age marked the outset of nuclear weapons testing, which is responsible for the radioactive contamination of a large number of sites worldwide. The paper aims to analyze nuclear weapons tests conducted in the second half of the twentieth century, highlighting the impact of radioactive pollution on the atmospheric, aquatic, and underground environments. Special attention was given to the concentration of main radioactive isotopes which were released, such as ¹⁴C, ¹³⁷Cs, and ⁹⁰Sr, generally stored in the atmosphere and marine environment. In addition, an attempt was made to trace the spatial delimitation of the most heavily contaminated sites worldwide, and to note the human exposure which has caused a significantly increased incidence of thyroidal cancer locally and regionally. The United States is one of the important examples of assessing the correlation between the increase in the thyroid cancer incidence rate and the continental-scale radioactive contamination with ¹³¹I, a radioactive isotope which was released in large amounts during the nuclear tests carried out in the main test site, Nevada.     

Ecotoxicological evaluation of industrial port of Venice (Italy) sediment samples after a decontamination treatment

This work assesses the ecotoxicological effects of polluted sediment after a decontamination treatment process using a new sediment washing technique. Sediment samples were collected from four sites in Marghera Port industrial channels (Venice, Italy). Ecotoxicological evaluations were performed with Vibrio fischeri and Crassostrea gigas bioassays. Whole sediment and elutriate were deemed as the most suitable environmental matrices for this study. Toxicity scores developed in the Lagoon of Venice for V. fischeri on whole sediment and for C. gigas on elutriate were considered for the final ranking of samples. Ecotoxicological results showed that the treated sediment samples presented both acute and sub-chronic toxicities, which were mainly attributed to the presence of some remaining chemicals such as metals and polyaromatic hydrocarbons. The acute toxicity ranged from low to medium, while the sub-chronic one from absent to very high, suggesting that treated sediments could not be reused in direct contact with seawater.     

Evaluation of various tests for the diagnosis of soil contamination by 2,4,5-trichlorophenol (2,4,5-TCP)

Soil response to contamination with 2,4,5-triclorophenol was studied to test the validity of the concept of Generic Reference Levels (GRL), the main criterion used to define soil contamination. Soil samples were artificially contaminated with doses between 0 and 5000 mg kg⁻¹ of 2,4,5-triclorophenol, and analysed by various tests. Where possible, the response of soils to the contaminant was modelled by a sigmoidal dose-response curve in order to estimate the ED₅₀ values. The tests provided different responses, but only microbial biomass-C and dehydrogenase and urease activities demonstrated soil deterioration in response to contamination. The results suggest that the diagnosis of soil contamination has been greatly simplified in the legislation by the provision of a single figure for each compound, and that the GRL concept could perhaps be substituted by measurement of ED₅₀ values, which better reflect the alteration of a soil due to the presence of a xenobiotic substance.     

Biodegradability of PMMA Blends with Some Cellulose Derivatives

High polymer blends of Polymethyl methacrylate (PMMA) with cellulose acetate (CA) and Cellulose acetate phthalate (CAP) of varying blend compositions have been prepared to study their biodegradation behavior and blend miscibility. Films of PMMA–CA, and PMMA–CAP blends have been prepared by solution casting using Acetone and Dimethyl formamide(DMF) as solvents respectively. Biodegradability of these blends has been studied by four different methods namely, soil burial test, enzymatic degradation, and degradation in phosphate buffer and activated sludge degradation followed by water absorption tests to support the degradation studies. Degradation analysis was done by weight loss method. The results of all the tests showed sufficient biodegradability of these blends. Degradability increased with the increase in CA and CAP content in the blend compositions. The miscibility of PMMA–CA and PMMA–CAP blends have been studied by solution viscometric and ultrasonic methods. The results obtained reveal that PMMA forms miscible blends with either CA or CAP in the entire composition range. Miscibility of the blends may be due to the formation of hydrogen bond between the carbonyl group of PMMA and the free hydroxyl group of CA and CAP.     

Bioaccessibility of metals in soils: comparison between chemical extractions and in vitro tests

It is well-known that the total metal content in soils is not a good indicator of their harmful effects, leading to an overestimation of risks. Toxicological and environmental hazards depend on the chemical species and on its bioavailability to target organisms. Because a good estimation of bioavailability is difficult, a good compromise is to assess bioaccessibility, defined as the maximum amount of a pollutant which is potentially absorbable by a target organism. This study presents a comparison of different strategies to measure metal bioaccessibility in soils. Three procedures were applied to real soil samples with different levels of metal contamination: pseudo-total metal attack, selective sequential extractions and in vitro tests (deliberately developed to simulate human or mammals digestion). Considering the first step of the selective extraction procedure, which can provide the bioaccessible fraction for deposit-feeder organisms, data obtained for each metal were lower than those obtained from in vitro tests. Therefore, it is possible to highlight that this extraction tends to underestimate metal bioaccessibility in soils for humans, while in vitro tests certainly will overestimate bioaccessibility for organisms as invertebrates. If the sum of first and second step of sequential procedure is considered, results are quite similar to those obtained from in vitro tests, but this kind of procedure would require two days of work rather than a few hours required to perform an in vitro test. Results highlight the diversity among the differently defined bioaccessible fractions and the need to apply the most suitable procedure depending on the target organism.     

Social network analysis and valid Markov chain Monte Carlo tests of null models

Analyses of animal social networks derived from group-based associations often rely on randomisation methods developed in ecology (Manly, Ecology 76:1109–1115, 1995) and made available to the animal behaviour community through implementation of a pair-wise swapping algorithm by Bejder et al. (Anim Behav 56:719–725, 1998). We report a correctable flaw in this method and point the reader to a wider literature on the subject of null models in the ecology literature. We illustrate the importance of correcting the method using a toy network and use it to make a preliminary analysis of a network of associations among eagle rays.

Measuring sustainability

An agricultural system is sustainable if productive output is maintained economically over time when assessed in relation to environmental concern. This paper considers ways of statistically evaluating measures of sustainability illustrated by reference to extensive data from the Classical Experiments at Rothamsted.     

The effects of the insecticide lambda-Cyhalothrin on the earthworm Eisenia fetida under experimental conditions of tropical and temperate regions

Plant Protection Products can affect soil organisms and thus might have negative impacts on soil functions. Little research has been performed on their impact on tropical soils. Therefore, the effects of the insecticide lambda-Cyhalothrin on earthworms were evaluated in acute and chronic laboratory tests modified for tropical conditions, i.e. at selected temperatures (20 and 28 °C) and with two strains (temperate and tropical) of the compost worm Eisenia fetida. The insecticide was spiked in two natural soils, in OECD artificial soil and a newly developed tropical artificial soil. The effects of lambda-Cyhalothrin did rarely vary in the same soil at tropical (LC50: 68.5-229 mg a.i./kg dry weight (DW); EC50: 54.2-60.2 mg a.i./kg DW) and temperate (LC50: 99.8-140 mg a.i./kg DW; EC50: 37.4-44.5 mg a.i./kg DW) temperatures. In tests with tropical soils and high temperature, effect values differed by up to a factor of ten.