以预处理剩余污泥为燃料MFC产电性能及不连续供电的可行性

为探讨微生物燃料电池(microbial fuel cell,MFC)处理经预处理后剩余污泥的可行性以及不连续供电能力,采用双室MFC,以剩余污泥热处理上清液为基质进行启动和运行,通过改变电池阴极电子受体而导致电势差变化来监测其产电的运行稳定性.结果表明,反应器以氧气作为阴极电子受体148 h后启动成功,最大输出电压0.24 V,将阴极电子受体换为铁氰化钾时,能获得0.66 V的最大输出电压和4.21 W·m~(-3)的最大功率密度.当将阴极电子受体分别替换为氧气或者开路,又转换为铁氰化钾后,电池输出功率恢复迅速,电池对有机物去除效率基本不受影响,对化学需氧量(COD)、氨氮去除效率分别达70%和80%.本研究表明,利用预处理剩余污泥进行MFC处理和产电是可行的,可获得较高的功率密度,同时MFC可以实现不连续供电.     

微生物燃料电池恒电流预培养阳极生物膜分析表征

阳极性能是影响微生物燃料电池(Microbial Fuel Cells,MFCs)性能的关键因素之一,同时阳极的接种挂膜过程是影响微生物燃料电池启动效率的关键因素.因此,本课题组提出了预培养阳极作为微生物燃料电池的一种新型阳极的概念,在三电极体系下,通过外加恒定电流预培养阳极,在不同条件下对阳极表面进行电化学选择和生物膜驯化以丰富生物膜结构和厚度.结果表明,阳极的性能与预培养电流大小密切相关,预培养阳极CF-4i(外加4 A·m-2电流密度)通过循环伏安法、塔菲尔曲线、电化学阻抗谱测试,性能好于其他测试组及对照组,装配阳极CF-4i的微生物燃料电池能实现最大功率密度968.20 m W·m-2,是对照组的2.53倍.同时,通过共聚焦显微镜观察发现,生物膜大体分两层,外层的活细胞及内层的死细胞,外层活细胞长在内层死细胞之上.这种结构分布表明,阳极生物膜中的活细胞部分绝大多数都分布于生物膜的外侧,而不是均布于整个阳极生物膜中;同时这也表明不是整个阳极生物膜都具有新陈代谢活性,但死亡的细胞可以继续积累在电极表面附近,活的外层膜负责电流的产生,而内层的死细胞作为一种导电基质.     

有机溶剂中温法溶出光伏组件封装材料乙烯-醋酸乙烯酯

采用有机溶剂邻二氯苯中温法溶出模拟光伏组件的封装材料乙烯-醋酸乙烯酯(EVA),探究了不同条件下EVA的溶出率及模拟组件的分离率,通过正交实验确定了有机溶剂中温法处理EVA的最佳条件.实验结果表明,在反应温度160℃、固液比(光伏组件个数与邻二氯苯体积之比,个/mL)4:100、搅拌转速800 r/min、反应时间24...     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Photovoltaic-thermal (PV/t) panel to minimize electrical and air conditioning energy consumption of a typical office in Beirut

A combined photovoltaic–thermal (PV/t) panel is proposed to produce simultaneously electricity and heat from one integrated unit. The unit utilizes effectively the solar energy through achieving higher PV electrical efficiency and using the thermal energy for heating applications. To predict the performance of the PV/t at a given environmental conditions, a transient mathematical model was developed. The model was integrated in a heating application for a typical office space in the city of Beirut to provide the office needs for electricity, heating during winter season, and dehumidification and evaporative cooling during the summer season. To minimize the yearly office energy (electrical and heat) needs, the PV/t panel cooling air flow rate and the dehumidification regeneration temperature were determined for opimal unit operation. Thermal energy savings of up to 85% in winter and 71% in summer were achived compared to conventional systems at a payback period of 8 years for the panels.     

Economic dispatch of power system containing wind power and photovoltaic considering carbon trading and spare capacity variation

The drying up of the fossil energy sources and the damage from unchecked carbon emissions demand the development of low carbon economy, which promotes the development of new energy sources, such as wind power and photovoltaic. However, the direct connections of wind/photovoltaic power into power grid bring great impacts on power systems, thus affecting the security and stability of power system operations, which challenges the power system dispatching. In despite of many methods for power system dispatch, lack of the models, for power system containing wind power and photovoltaic considering carbon trading and spare capacity variation (PSCWPCCTSCV), restricts the further optimal operations of power systems. This paper studies the economic dispatch modeling problem of power system containing wind power and photovoltaic, establishes the model of economic dispatch of PSCWPCCTSCV. On this basis, adaptive immune genetic algorithm is applied to conduct the economic operation optimization, which can provide the optimal carbon trading price and the optimal power distribution coefficient. Finally, simulations based on the newly proposed models are made to illustrate the economic dispatch of PSCWPCCTSCV. The results show that optimization with the proposed model can not only weaken the volatility of the new energy effectively, but also reduce carbon emissions and reduce power generation costs.     

宁夏地区光伏发电环境效益分析及建模

在阐述了宁夏地区光伏发电发展的优势及发展现状的基础上,分析了光伏发电开发利用对宁夏生态环境产生的积极和消极的影响,并为降低消极影响提出了相应的对策;为了定量直观的评估光伏发电积极影响和消极影响所产生的环境效益,分别建立了节能减排、防风固沙和土地增值、景观效应、植被恢复费用、噪声污染超标罚款、光污染费用等价值模型及光伏发电总的生态环境效益价值模型;最后以中电投宁夏能源铝中卫香山光伏电站为例进行计算验证,结果表明模型的合理性和准确性,同时光伏电站的节能减排效益显著。相对于传统的火力发电,表现了优越的环境效益。     

采用电芬顿-磁固定化菌株耦合体系治理苯酚废水的研究

为实现对苯酚废水治理工艺的优化,针对传统包埋法制备固定化细胞的工艺方法进行改进,选用磁性纳米颗粒制备磁固定化细胞,将其与电芬顿法结合构建耦合体系,利用耦合协同作用实现催化剂的重复利用,并依托微生物的良好降解性能与稳定性提高苯酚降解率,进一步实现对苯酚废水治理工艺的系统优化。     

Mitochondrial toxicity and in vitro biological effects of ambient PM2.5 from an urban site in China

Abstract

The roles of PM_2.5-induced mitochondrial damage and oxidative stress on mast cell degranulation were examined in vitro. Mast cells were treated with suspensions of PM_2.5 in Dulbecco’s modified Eagle’s medium at concentrations from 25 to 200?mg/L in the absence or presence of 10?mmol/L N-acetyl-L-cysteine. Biological effects and mitochondrial function were assessed by determining cell viability, β-hexosaminidase release, interleukin-4 secretion, reactive oxygen species generation, adenosine triphosphate production, potential alteration of mitochondrial membrane, and activities of mitochondrial electron transport chain complexes I and III. Exposure of mast cells to PM_2.5 induced reduction of adenosine triphosphate production, collapse of mitochondrial membrane potential, and inhibition of the activity of complex III. Co-treatment of mast cells exposed to PM_2.5 with N-acetyl-L-cysteine attenuated cytotoxicity and the production of reactive oxygen species, and decreased the release of β-hexosaminidase and interleukin-4. Evidently, PM_2.5-induced oxidative stress plays an essential role in mitochondrial toxicity and mast cell activation.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.