高气泡表面积通量浮选柱气浮除藻的研究

湖泊、水库等水源的富营养化,使藻类去除成为饮用水生产的重要任务.本研究采用高气泡表面积通量浮选柱气浮除藻,考察了混凝剂、气泡表面积通量和浮选柱高度等因素的影响.试验表明,高气泡表面积通量浮选柱气浮可高效地去除绿藻、硅藻和蓝藻,叶绿素a和藻类去除率达95%以上,比传统浮选柱气浮和沉降作业有较大幅度提高.与普通气浮柱比较,高气泡表面积通量浮选柱增加了气泡与藻的碰撞几率,防止因大表观充气速率造成的紊流和扰动,使气泡/藻结合体有相对静态的浮升环境,避免了气泡/藻结合体在浮升过程中的脱落,实现对藻类的迅速捕集和转移.     

基于Tripod-Beta模型的船舶火灾事故风险分析

为深入分析船舶火灾事故风险因素及其后果产生的影响,通过分析1991-2017年全球船舶火灾事故调查报告,从人员、管理、船舶设备、货物、环境5个方面对船舶火灾影响因素进行识别研究;采用三脚架事故致因模型(Tripod-Beta model),构建考虑安全栅的船舶火灾事故情景演化模型,识别船舶火灾关键影响因素;并在样本量较少的情况下,采用信息扩散理论计算船舶火灾发生率;最后,利用布尔函数和风险矩阵,对船舶火灾事故风险进行评价研究。结果表明:船员不安全行为和船舶设备表面过热、设备短路是船舶火灾事故的关键风险因素;事故后果链中安全栅遭到破坏时,船舶火灾风险处于不希望发生范围内。该方法能有效评估船舶火灾风险的等级,满足海事管理部门的监管工作需求。     

新型膜-生物反应器在不同通量下的膜污染特性研究

选择适当的膜通量是膜-生物反应器控制膜污染的有效手段之一.本文根据膜通量与临界通量的关系选取了5个不同的膜通量,考察在这些通量条件下新型膜-生物反应器膜污染发展特性的变化.试验结果表明,膜通量的变化会影响膜污染的发展特性.当膜通量小于临界通量区时,膜污染发展具有"2阶段"趋势,并且膜通量越小"第1阶段"和"第2阶段"的膜污染发展速率对比越显著.当膜通量在临界通量区通量内时,首先出现短暂的膜污染快速增长期,随后膜污染发展仍呈现"2阶段"现象.当膜通量大于临界通量区通量时,膜操作压力(TMP)从开始运行即迅速上涨直至试验结束.     

Methane fluxes from tundra soils and snowpack in the maritime Antarctic

Methane fluxes were measured from three exposed tundra sites and four snowpack sites on the Fildes Peninsula in the maritime Antarctic in the summertime of 2002. The average fluxes at two normal tundra sites were −15.3 μg m⁻² h⁻¹ and −14.3 μg m⁻² h⁻¹, respectively. The fluxes from tundra site with fresh penguin dropping addition showed positive values with the average of 36.1 μg m⁻² h⁻¹, suggesting that the deposition of fresh droppings greatly enhanced CH₄ emissions from the poor Antarctic tundra during penguin breeding periods. The summertime variation in CH₄ flux was correlated with surface ground temperature and the precipitation. The correlation between the flux and PT₀, which is the product of the precipitation and surface ground temperature, was quite strong. The diurnal cycle of CH₄ flux from the tundra soils was not obtained due to local fluky weather conditions. The fluxes through four snowpack sites were also obtained by the vertical CH₄ concentration gradient and their average fluxes were −46.5 μg m⁻² h⁻¹, −28.2 μg m⁻² h⁻¹, −46.4 μg m⁻² h⁻¹ and −17.9 μg m⁻² h⁻¹, respectively, indicating that tundra soils under snowpack also consume atmospheric CH₄ in the maritime Antarctic; therefore these fluxes could constitute an important part of the annual CH₄ budget for Antarctic tundra ecosystem.     

A new tracer technique for monitoring groundwater fluxes: the Finite Volume Point Dilution Method

Quantification of pollutant mass fluxes is essential for assessing the impact of contaminated sites on their surrounding environment, particularly on adjacent surface water bodies. In this context, it is essential to quantify but also to be able to monitor the variations with time of Darcy fluxes in relation with changes in hydrogeological conditions and groundwater - surface water interactions. A new tracer technique is proposed that generalizes the single-well point dilution method to the case of finite volumes of tracer fluid and water flush. It is called the Finite Volume Point Dilution Method (FVPDM). It is based on an analytical solution derived from a mathematical model proposed recently to accurately model tracer injection into a well. Using a non-dimensional formulation of the analytical solution, a sensitivity analysis is performed on the concentration evolution in the injection well, according to tracer injection conditions and well-aquifer interactions. Based on this analysis, optimised field techniques and interpretation methods are proposed. The new tracer technique is easier to implement in the field than the classical point dilution method while it further allows monitoring temporal changes of the magnitude of estimated Darcy fluxes, which is not the case for the former technique. The new technique was applied to two experimental sites with contrasting objectives, geological and hydrogeological conditions, and field equipment facilities. In both cases, field tracer concentrations monitored in the injection wells were used to fit the calculated modelled concentrations by adjusting the apparent Darcy flux crossing the well screens. Modelling results are very satisfactory and indicate that the methodology is efficient and accurate, with a wide range of potential applications in different environments and experimental conditions, including the monitoring with time of changes in Darcy fluxes.     

基于集对分析的石化企业安全投资状况动态评价

石油化工企业的安全事故频发和职业危害严重,不仅造成重大经济损失,而且对社会造成了不良影响,不合理的安全投资是造成这种状况的主要原因之一,对企业现有安全投资状况进行评价是合理进行安全投资的前提和基础。本文针对石油化工企业安全投资评价中诸多不确定性因素和动态特征进行分析,运用集对分析和马尔可夫链理论,建立了基于集对分析石化企业安全投资状况的动态评价模型,为安全投资状况评价工作提供了一个新方法。以某石油化工企业为例,通过对该企业2006-2009年这四年安全投资状况进行动态评价分析,并预测出2010年该企业的安全投资状况。评价结果表明,将集对分析和马尔可夫链理论用于石化企业安全投资状况的动态评价与预测,起到了非常好的效果,能够为企业科学合理地作出正确决策提供理论依据。     

The effect of barriers on reducing thermal heat fluxes from a hydrocarbon pool fire

The radiant heat flux from a pool fire is frequently calculated using the solid flame model, where the flame envelope is approximated as a stationary cylinder whose surface emits thermal radiation at a constant rate. Radiant heat flux calculations using the solid flame model assume the target to be at a given elevation, typically at ground level, and to have an unobstructed view of the fire. The presence of obstacles (e.g., walls, buildings, etc.) or terrain features that would create shaded areas and provide shielding of a target from the fire is typically neglected in these calculations: this is a conservative approach, but it is not accurate. This paper presents a methodology to utilize the solid flame model to calculate the heat flux to a target while taking into account the presence of an obstruction between the target and the fire. The shielded solid flame method can quantitatively account for the presence of obstacles as a passive mitigation measure and allows project developers or designers to optimize their facility layout to meet safety requirements. The methodology presented in this paper uses the same correlations found in currently used solid flame models (e.g., LNGFIRE3), therefore, it remains consistent with current regulatory requirements for LNG facilities in the U.S.     

外置浸没式超滤膜处理垃圾焚烧发电厂渗滤液

结合外置浸没式超滤膜处理垃圾渗滤液的中试试验,对垃圾焚烧厂渗滤液SBR出水进行处理,主要研究结果如下:外置浸没式超滤膜(膜孔径0.1μm)对COD_(Cr)去除率为36.86%,出水SDI为1.87~3.69,可以作为纳滤预处理工艺使用,选取10 L/(m~2·h)的运行通量较为合理。     

城市污泥微波干化及污染物析出特性研究

采用直接热干化和微波两种方法对3种城市污泥进行了研究,分别考察了温度、污泥厚度、微波功率对干化过程的影响,并研究了干化气体的二次污染问题。研究表明,直接热干化耗时长,温度和污泥厚度是影响干化过程的主要因素;微波干化耗时短,效率高;厚度为4 mm的污泥在微波功率为1 200 W时,仅需3min含水率降至10%以下。微波干化气体的冷凝液COD,NH_4~+-N指标明显低于直接热干化。     

三峡消落带沉积物-大气界面汞交换通量及其影响因素

应用动力通量箱(Dynamic Flux Chamber,DFC)与高时间分辨率的RA-915+自动汞分析仪联用技术,在消落带沉积物出露期,野外现场监测沉积物-大气界面汞交换通量,同时对其影响因素进行了分析。结果表明:三峡库区消落带沉积物-大气界面汞交换通量范围为-6.80±12.35~28.17±36.17 ng/(m2·h)晴天库区消落带沉积物-大气界面汞交换通量表现出相同的变化趋势,即从早晨开始沉积物-大气界面汞的交换通量逐渐增加,到正午左右达到峰值,之后交换通量逐渐减小,但阴天这一趋势不明显。暖季白天沉积物-大气界面汞交换通量都以释放为主,冷季白天则以沉降为主。暖季晴天,沉积物-大气汞交换通量与气温、沉积物温度、光照强度呈显著正相关关系,与相对湿度呈显著负相关关系。无论晴天还是阴天,大气汞浓度都与沉积物-大气汞交换通量呈负相关关系。白天,光照强度和大气汞浓度是影响消落带沉积物/大气界面汞交换通量的主要因素,而在夜间,沉积物温度和大气汞浓度是其主要影响因素。