Trends of air pollution in the Fichtelgebirge Mountains, Bavaria

We analyzed 13 years of hourly measurements of SO₂, NO_x, and O₃, at forest ecosystem research sites in SE Germany. A quasi-continuous data record was obtained by combining data sets from two locations. Before interpreting trends in the combined data set, we analyzed if the change of location introduced a systematic bias. We employed autocorrelation functions, Hurst statistics, complexity analysis, and recurrence quantification and found that the partial data sets exhibited no indication of the presence of any bias. For SO₂, we also compared the data from the forest sites with data obtained in nearby cities and also found no indications for any systematic effects. Applying nonparametric trend statistics we found a significant decrease of the SO₂. Most of the observed decrease is due to the reductions of SO₂ emissions in eastern Germany, but reductions in western Germany and the Czech Republic also played important roles. For O₃, we observed a significant increase, the causes of which are unclear from our data alone. No trend was identified for NO_x.     

A review of biomarker compounds as source indicators and tracers for air pollution

An overview of the application of organic geochemistry to the analysis of organic matter on aerosol particles is presented here. This organic matter is analyzed as solvent extractable bitumen/ lipids by gas chromatography-mass spectrometry. The organic geochemical approach assesses the origin, the environmental history and the nature of secondary products of organic matter by using the data derived from specific molecular analyses. Evaluations of production and fluxes, with cross-correlations can thus be made by the application of the same separation and analytical procedures to samples from point source emissions and the ambient atmosphere. This will be illustrated here with typical examples from the ambient atmosphere (aerosol particles) and from emissions of biomass burning (smoke). Organic matter in aerosols is derived from two major sources and is admixed depending on the geographic relief of the air shed. These sources are biogenic detritus (e.g., plant wax, microbes, etc.) and anthropogenic particle emissions (e.g., oils, soot, synthetics, etc.). Both biogenic detritus and some of the anthropogenic particle emissions contain organic materials which have unique and distinguishable compound distribution patterns (C₁₄-C₄₀). Microbial and vascular plant lipids are the dominant biogenic residues and petroleum hydrocarbons, with lesser amounts of the pyrogenic polynuclear aromatic hydrocarbons (PAH) and synthetics (e.g., chlorinated compounds), are the major anthropogenic residues. Biomass combustion is another important primary source of particles injected into the global atmosphere. It contributes many trace substances which are reactants in atmospheric chemistry and soot paniculate matter with adsorbed biomarker compounds, most of which are unknown chemical structures. The injection of natural product organic compounds into smoke occurs primarily by direct volatilization/steam stripping and by thermal alteration based on combustion temperature. Although the molecular composition of organic matter in smoke particles is highly variable, the molecular tracers are generally still source specific. Retene has been utilized as a tracer for conifer smoke in urban aerosols, but is not always detectable. Dehydroabietic acid is generally more concentrated in the atmosphere from the same emission sources. Degradation products from biopolymers (e.g., levoglucosan from cellulose) are also excellent tracers. An overview of the biomarker compositions of biomass smoke types is presented here. Defining additional tracers of thermally-altered and directly-emitted natural products in smoke aids the assessment of the organic matter type and input from biomass combustion to aerosols. The precursor to product approach of compound characterization by organic geochemistry can be applied successfully to provide tracers for studying the chemistry and dispersion of ambient aerosols and smoke plumes. Presented at the 6th FECS Conference on Chemistry and the Environment, Atmospheric Chemistry and Air Pollution, August 26–28, 1998, Copenhagen.     

Modeling the partitioning of BTEX in water-reformulated gasoline systems containing ethanol

The objectives of this research were to quantify the extent of cosolvency for water–gasoline mixtures containing ethanol and to identify appropriate modeling tools for predicting the equilibrium partitioning of BTEX compounds and ethanol between an ethanol-bearing gasoline and water. Batch-equilibrium experiments were performed to measure ethanol and BTEX partitioning between a gasoline and aqueous phase. The experiments incorporated simple binary and multicomponent organic mixtures comprised of as many as eight compounds as well as highly complex commercial gasolines where the composition of the organic phase was not completely defined. At high ethanol volume fractions, the measured partition coefficients displayed an approximate linear relationship when plotted on semi-log scale as a function of ethanol volume fraction. At lower concentrations, however, there was a distinctly different trend which is attributed to a change in solubilization mechanisms at these concentrations. Three mathematical models were compared with or fit to the experimental results. Log-linear and UNIFAC-based models were used in a predictive capacity and were capable of representing the overall increase in partition coefficients as a function of increasing ethanol content in the aqueous phase. However, neither of these predicted the observed two-part curve. A piecewise model comprised of a linear relationship for low ethanol volume fractions and a log-linear model for higher concentrations was fit to data for a surrogate gasoline comprised of eight compounds and was then used to predict BTEX concentrations in the aqueous phase equilibrated with three different commercial gasolines. This model was superior to the UNIFAC predictions, especially at the low aqueous ethanol concentrations.     

道路交通中苯并(a)芘的高效液相色谱快速测定

用超细玻璃纤维滤膜采集杭州市某道路上机动车排放的苯并（ａ）芘,经超声萃取,高速离心后直接进ＨＰＬＣ分析。在选定的色谱条件下,苯并（ａ）芘与其他多环芳烃完全分离,绝对进样量在０．８～０．０２ ｎｇ时线性良好,相关系数为０．９９９７９,最小检出量０．８ ｐｇ,加标回收率８７．５％～９３．８％。     

选煤脱除氟、砷的研究

研究了采自西南3省、1市17个选煤厂的原煤和洗精煤样品,分析了灰分、氟和砷含量,探讨了选煤脱除氟、砷的机理和影响因素。结果表明,选煤能有效降低煤中氟、砷的含量,应用前景广阔。     

Bacterial community structure analyses to assess pollution of water and sediments in the Lake Shkodra/Skadar, Balkan Peninsula

- Goal, Scope, Background. Lake Skadar is the largest lake in Balkan Peninsula, located on the Montenegro-Albanian border. The unique features of the lake and wide range of endemic and rare or endangered plant and animal species resulted in the classification of the Skadar as a wetland site of international significance. In spite of its importance the Lake is influenced by inflowing waters from river Morača and other regional rivers contaminated by the industry, municipal and agricultural activities in the area. Therefore, the Lake has been subject of various physical, chemical, biological and toxicological examinations. However, community-level analyses are most relevant to assess the effect of stressors on aquatic ecosystems. In the present study bacterial community structure among differently polluted sites of the lake was compared by genetic fingerprinting technique. Methods Water and sediment samples were collected from five differently polluted sampling sites on the Lake Skadar in spring and autumn of the same year. The bacterial community structure in the samples was characterized and compared by temporal temperature gel electrophoresis (TTGE) analysis of polymerase chain reaction-amplified bacterial 16S rRNA genes. Results and Discussion The TTGE analysis resulted in many distinguishable and reproducible band patterns, allowing reliable comparison of bacterial communities among sampling sites. Results on the bacterial community structure revealed that three of the selected locations can be considered as sites that have not shown any pollution degradation determined by our method, due to similar structure of bacterial community in the sediment samples. On the other hand, significant shifts in bacterial community structure in the mouth of the river Morača and Plavnica were shown. Since the results coincide with some of the bioassays and chemical analysis performed previously, the changes in bacterial community structure are explained as an effect of antropogenic pollution on the lake ecosystem by waters of river Morača and stream Plavnica. Conclusion The TTGE has proven to be an efficient and reliable method to monitor bacterial dynamics and community shifts in aquatic environment, especially in the sediments. Within the variety of environmental quality assessments the use of TTGE analyses of bacterial community is strongly recommended, particularly as an initial investigation. However, in any conclusion on the state of the environment, the TTGE results should be combined to some other biological, chemical and hydrological data. Recommendation and Outlook Since prokaryotes are a crucial group of organisms in the biosphere, the ecosystem function studies are largely based on bacterial communities. Therefore, bacterial community structure analysis should be a part of an integrated weight of evidence approach in pollution assessment. In case of Triad approach, consisting of chemical analyses, bioassays, and community studies in the field, the TTGE bacterial community structure analyses should be placed in the later Triad leg. In comparison to other community studies, based on various biotic indices, the TTGE bacterial community analysis has proven to be very sensitive, reliable and less time consuming.     

Seasonal Fluctuation in Heavy Metal Pollution in Iran´s Siahroud River - A Preliminary Study (7 pp)

Background The management of its available water resources has become a key issue for Iran. During the last few decades, the water quality of Siahroud River in the coastal plain of the Caspian Sea in Gilan Province in Northern Iran has significantly degraded. The scarcity of water has been compounded by rapid population growth and increasing pollution from fertilizers, pesticides, and municipal and industrial wastes. One of the sources of this degradation is the movement of heavy metals from the river's watershed into the various water systems supported by the river, including the water system for Rasht City. Methods To study the magnitude of heavy metal pollution in the Siahroud River, seven heavy metals including Zn, Cu, Pb, Cd, Mn, Fe, and Ni were measured in duplicate from replicated water samples collected over five consecutive seasons and analyzed by Atomic Absorption Spectrometry. In situ measurements of pH were taken with the samples and total organic carbon (TOC) was analyzed by IR gas measurement. Results The results demonstrated that four of the seven heavy metals including Pb, Fe, Cd, and Mn exceeded permissible safe levels as established by the United States Environmental Protection Agency. Multivariate factor analysis suggested that industrial land-use was the main contributing factor for the high levels of Fe and Mn in the Siahroud River, whereas, Cd was principly from agricultural activities in the watershed. The data also suggested that pH and TOC had an important role in the behaviour of Pb and Mn, and that the elevated levels of these two heavy metals in Siahroud River was the consequence of other anthropogenic sources. Only negligible levels of Zn, Cu and Ni were detected. Finally, all the sampling stations were subjected to cluster analysis. The results indicated that three different zones could be distinguished according to the levels of pollution. In addition, it was shown that the urban areas did not have a significant impact on the heavy metal pollution in the river. This observation stems from the fact that the data from the sampling stations before and after Rasht City were not significantly different. Recommendation . Preventive measures need to be undertaken in the land-use systems and watersheds of the Siahroud River to reduce the pollution levels of Pb, Cd, Mn and Fe.     

Enhanced experimental flexibility and control in ecotoxicological mesocosm experiments--a new outdoor and indoor pond and stream system

Scope The German Federal Environmental Agency has put into operation a new modular mesocosm system consisting of eight outdoor and eight indoor ponds and streams in order to investigate fate and effects of chemicals and municipal wastewater in aquatic ecosystems. General design and special characteristics are given to demonstrate the wide range of possibilities for experimental research. - General design. Each of the 16 streams with riffle and pool sections can be varied in length up to 106 m. The streams can be run as circular or flow-through systems at a flow velocity of 0.02 to 0.6 m/s. Physico-chemical standard parameters are measured on-line. The 16 ponds, which can be connected to the stream systems, are equipped with drainage and pore water-sampling devices for simulating processes in the littoral zone including influent and effluent ground water flow. Perspectives Since the highly flexible and controllable construction also allows treating a wide range of hydrological and ecological experiments external institutions are invited to submit proposals.     

Regression modelling of hourly NOx and NO2 concentrations in urban air in London

Based on hourly measurements of NO_x NO₂ and O₃ and meteorological data, an ordinary least squares (OLS) model and a first-order autocorrelation (AR) model were developed to analyse the regression and prediction of NO_x and NO₂ concentrations in London. Primary emissions and wind speed are the most important factors influencing NO_x concentrations; in addition to these two, reaction of NO with O₃ is also a major factor influencing NO₂ concentrations. The AR model resulted in high correlation coefficients (R > 0.95) for the NO_x and NO₂ regression based on a whole year's data, and is capable of predicting NO₂ (R = 0.83) and NO_x (R = 0.65) concentrations when the explanatory variables were available. The analysis of the structure of regression models by Principal Component Analysis (PCA) indicates that the regression models are stable. The results of the OLS model indicate that there was an exceptional NO₂ source, other than primary emission and reaction of NO with O₃, in the air pollution episode in London in December 1991.