Al13形态在混凝中的作用机制

从铝的水解形态转化角度考察了铝盐在高碱度和高有机物浓度水体中的混凝行为.结果表明,铝盐的混凝效能是与混凝过程中的Al₁₃含量成正比.高投药量时氯化铝(AlCl₃)既可以有效调节水体pH值又能在混凝过程中原位水解产生较多的Al₁₃形态,因而混凝效能要高于聚合氯化铝(PACl).在铝盐混凝中,调节pH值到6～7之间可以控制铝形态分布从而达到提高混凝效能和减少残留铝的目的.在调节pH值强化混凝的方法中使用传统铝盐的效果要好于无机高分子絮凝剂.     

PVC/PES相容性及对共混超滤膜性能的影响

研究了聚氯乙烯(PVC)与聚醚砜(PES)共混体系相容性及其对共混膜性能的影响。利用溶解度参数原则和混合热焓原则进行理论预测,用铸膜液粘度法进行实验表征,均说明该体系为部分相容体系,且其相容性与组成及共混温度有关。通过对共混膜传质特性的考察,表明铸膜液的相容性会明显影响共混膜的性能;采用共混法可以改善膜性能。     

Comparative study on the efficiency and environmental impact of two methods of utilizing polyvinyl chloride waste based on life cycle assessments

Two processes of utilizing polyvinyl chloride （PVC） waste, an incineration process and a vacuum pyrolysis process, for energy conversion were compared to determine their efficiency and environmental perfor- mance. We carried out a life cycle assessment with each of the two processes to evaluate their environmental impact and defined the goals and limits of our remit. As well, we established an inventory of PVC waste from incineration and vacuum pyrolysis based on process analysis, data collection and calculations. The results show that electrical power output per unit mass of PVC waste in the incineration process was twice as high as that of the vacuum pyrolysis process. Incineration had a larger total environmental impact potential than vacuum pyrolysis. The total environmental impact potential of PVC waste from incineration was three times higher than that from vacuum pyrolysis. Incineration of PVC disposed 300 ng. 100 kgI of dioxins and vacuum pyrolysis 98.19 ng- 100 kgI of dioxins. As well, we analyzed the data for their uncertainty with results quantified in terms of three uncertainties： basic uncertainty, additional uncertainty, and computational uncertainty. The coefficients of variation of the data were less than 25% and the quality of the inventory data was acceptable with low uncertainty. Both PVC waste disposal processes were of similar quality and their results comparable. The results of our life cycle impact assessment （LCIA） showed considerable reliability of our methodology. Overall, the vacuum pyrolysis process has a number advantages and greater potential for development of PVC disposal than the incineration process.     

利用蚀刻废液生产碱式氯化铜过程中二英类污染物的去除

针对蚀刻废液及其回收后生产的碱式氯化铜产品中二英(PCDD/Fs)和二英类多氯联苯(dl-PCBs)进行了分析研究,并比较了采用去除工艺前后两类污染物含量水平的变化特征.利用高分辨气相色谱/高分辨质谱对样品中PCDD/Fs和dl-PCBs进行分析,结果表明,氯化铜废液中PCDD/Fs和dl-PCBs的平均总浓度分别为264、139 pg·mL-1,而铜氨液中浓度分别为0.09、0.50 pg·mL-1;碱式氯化铜产品中浓度分别为106 pg·g-1(2.79 pg WHO-TEQ2005·g-1)和27.8 pg·g-1(0.69 pg WHO-TEQ2005·g-1);而经过吸附和过滤等去除工艺后,产品中PCDD/Fs和dl-PCBs的TEQ浓度水平分别降低至0.10—0.25 pg WHO-TEQ2005·g-1和0.05—0.72 pg WHO-TEQ2005·g-1,满足欧盟对于矿物源性饲料添加剂中PCDD/Fs和dl-PCBs的限量标准要求.研究表明该工艺能够有效去除利用蚀刻废液生产碱式氯化铜过程中的二英类污染物.     

氯化橡胶的清洁生产

通过氯化橡胶的清洁生产审计，改进氯化工序的设备结构及尾气吸收工艺，提高氯气利用率，并把工艺气变成可利用的工业产品，取得显著的环境效益和经济效益。     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

聚硫氯化铝絮凝效果及在水处理中的应用

采用聚硫氯化铝（ＰＡＣＳ）为絮凝剂进行废水处理试验,对其絮凝效果及影响因素进行了研究,试验结果表明,ＰＡＣＳ的ＳＯ４＾２－含量,碱化度,投加量和水的ｐＨ对絮凝效果有影响,当Ａｌ＾３＋／ＳＯ４＾２－（摩尔比）为１４￣１６,碱化度为６５％￣７０％,ｐＨ为６￣９、ＰＡＣＳ投加量为２￣４ｍｇ／Ｌ时,絮凝效果最佳,试验结果还表明,ＰＡＣＳ比聚氯化铝（ＰＡＣ）的絮凝效果好。     

GROUND WATER NITRATE REDUCTION IN GIANT CANE AND FOREST RIPARIAN BUFFER ZONES1

ABSTRACT: Ground water contamination by excess nitrate leaching in row‐crop fields is an important issue in intensive agricultural areas of the United States and abroad. Giant cane and forest riparian buffer zones were monitored to determine each cover type's ability to reduce ground water nitrate concentrations. Ground water was sampled at varying distances from the field edge to determine an effective width for maximum nitrate attenuation. Ground water samples were analyzed for nitrate concentrations as well as chloride concentrations, which were used as a conservative ion to assess dilution or concentration effects within the riparian zone. Significant nitrate reductions occurred in both the cane and the forest riparian buffer zones within the first 3.3 m, a relatively narrow width. In this first 3.3 m, the cane and forest buffer reduced ground water nitrate levels by 90 percent and 61 percent, respectively. Approximately 40 percent of the observed 99 percent nitrate reduction over the 10 m cane buffer could be attributed to dilution by upwelling ground water. Neither ground water dilution nor concentration was observed in the forest buffer. The ground water nitrate attenuation capabilities of the cane and forest riparian zones were not statistically different. During the spring, both plant assimilation and denitrification were probably important nitrate loss mechanisms, while in the summer nitrate was more likely lost via denitrification since the water table dropped below the rooting zone.     

无机-有机高分子复合絮凝剂处理含油废水的试验研究

研究了用聚合氯化铝（PAC）、聚合硫酸铁（PFS）、聚丙烯酰胺（PAM）及改性蒙托石等不同无机—有机高分子絮凝剂复配使用处理炼钢厂连铸含油废水的除油效果,考察了不同絮凝剂的复配以及絮凝剂的不同复配比例对处理效果的影响。试验结果表明,用聚合氯化铝（PAC）＋聚合硫酸铁（PFS）＋聚丙烯酰胺（PAM）3种絮凝剂复配使用除油效果最佳,当3种絮凝剂的复配比为2∶2∶3时除油效果最好,除油率达到88.2%,达到国家排放标准。     

FACTORS AFFECTING SALINITY REDUCTION IN LAKE TARPON,PINELLAS COUNTY,FLORIDA1

ABSTRACT: Following an enclosure of a sink-hole connecting Lake Tarpon to the Gulf of Mexico, the chloride concentration of lake waters decreased. Water and chloride budgets for the lake in 1975 were prepared, and predictions using the model of Lerman and Brunskill (1971) were made as to the time required for the lake to achieve fresh water status. Model verification indicated good agreement with predictions in 1976; however, data on [C1^-] for 1977 and 1978 are not as supportive of the model used. The information concerning the Lake Tarpon watershed provided by this latter fact is discussed.