Selective removal of 2,4-dichlorophenol from contaminated water using non-covalent imprinted microspheres

A molecularly imprinted polymer (MIP) for selective removal of 2,4-dichlorophenol (2,4-DCP) in water was prepared as microspheres by the reverse microemulsion polymerization method based on the non-covalent interactions between 2,4-DCP, oleic acid, and divinylbenzene in acetonitrile. Microspheres have been characterized by Fourier transform infrared spectrometer (FTIR) and energy dispersive X-ray spectrometer (EDS) studies with evidence of 2,4-DCP linkage in polymer particles and scanning electron microscopy (SEM) to study their morphological properties. The proper adsorption and selective recognition ability of the MIP were studied by an equilibrium-adsorption method. The MIP showed outstanding affinity towards 2,4-DCP in aqueous solution and the optimum pH value for binding has been found around the neutral range. The molecular recognition of 2,4-DCP was analyzed in detail by using molecular modeling software. In addition, by investigating the variation in the adsorption ability of the MIP, it clearly showed excellent reproducibility.     

Characterization of an adsorbed humin-like substance on an allophanic soil formed via catalytic polycondensation between catechol and glycine, and its adsorption capability to pentachlorophenol

An allophanic soil (AS) catalyzed the formation of dark-colored polymers via polycondensation reactions between catechol and glycine. The organic carbon content of the AS was increased from 0.16% to 1.3%, indicating that some of the dark-colored polymers had been adsorbed to the AS. The characteristics of the dark-colored polymers adsorbed on the AS were similar to those of a humin that is not extractable with an aqueous alkaline solution. Such a humin-like substance (HuLS) was separated from the AS by treatment with a mixture of HF and HCl. The HuLS and humic acid-like substance (HaLS), comprising the acid-insoluble fraction in the reaction mixture, were characterized by elemental analysis, size exclusion chromatography, pyrolysis-GC/MS and ¹³C NMR. However, the structural features of HaLS and HuLS had many points in common. These results suggest that HuLS-AS can be regarded as an organo-clay complex formed by the strong adsorption of HaLS to the AS. The adsorption of pentachlorophenol (PCP) to AS and HuLS-AS was examined at pH 5.5. At this pH, the zeta potential of the HuLS-AS showed a negative value. It would, therefore, be expected that pentachlorophenolate anions would adsorb with difficulty to HuLS-AS because of electrostatic repulsion. Nevertheless, the adsorption coefficient for PCP to HuLS-AS, as estimated by the Freundlich isotherm, was seven times larger than that for AS. These results show that HuLS, when adsorbed on the AS surface, has the capability to enhance the adsorption of PCP.     

Improved Bankfull Discharge Prediction Using 2‐Year Recurrence‐Period Discharge1

Abstract:  Knowledge of bankfull discharge (Q_bf) is essential for planners, engineers, geomorphologists, environmentalists, agricultural interests, developments situated on flood prone lands, surface mining and reclamation activities, and others interested in floods and flooding. In conjunction with estimating Q_bf, regionalized bankfull hydraulic geometry relationships, which relate Q_bf and associated channel dimensions (i.e., width, depth, and cross‐section area) to drainage basin area (A_da), are often used. This study seeks to improve upon the common practice of predicting Q_bf using A_da exclusively. Specifically, we hypothesize that predictions of Q_bf can be improved by including estimates of the 2‐year recurrence‐period discharge (Q₂) in regression models for predicting Q_bf. For testing this hypothesis, we used Q_bf estimates from 30 reports containing data for streams that span 34 hydrologic regions in 16 states. Corresponding values of Q₂ and A_da were compiled from flood‐frequency reports and other sources. By comparing statistical measures (i.e., root mean squared error, coefficient of determination, and Akaike’s information criterion), we determined that predicting Q_bf from Q₂ rather than A_da yields consistently better estimates of Q_bf. Other principal findings are (1) data are needed for at least 12 sites in a region for reliable hydraulic geometry model selection and (2) an approximate range of values for Q_bf/Q₂ is 0.10‐3.0.     

基于洪水过程的农业洪灾变化遥感快速评估模型及其应用

洪涝灾情的准确测度需要同时兼顾淹没区的面积大小和淹水时长信息。利用淹没区内由水和作物等多种地物所组成的"复合水体"不同于水体的波谱时间变化特性,将不同洪灾时期的水体指数和植被指数进行信息复合,以有效凸显水体和洪涝淹没区之间的影像差异,据此进行了灾初期、峰期和中后期等3个时次受淹范围的有效识别。在此基础上,根据洪涝灾情随着淹没时长而加重以及灾区内淹水时长非均匀分布的特性,建立基于淹没时长的受淹面积不等权参与的洪灾扩展动态度指数(Variation Index of Flood,VIF)和区域灾情比较指数(Comparison Index of Flood Disaster,CIFD)两种模型,并将模型应用于鄱阳湖区2016年夏季农业洪涝灾害的时空变化遥感监测。结果显示,应用上述两种模型不仅可以准确获取鄱阳湖区本次农业洪涝灾情的演变趋势,而且能够方便地对比分析区域内不同地方的受灾程度。鄱阳湖区在2016年6月23日~7月25日期间的洪涝灾情具有由弱增强再趋弱的特征,其VIF指数由初始阶段(6月23日~7月9日)的3.75降至后续阶段(7月9日~7月23日)的1.29;鄱阳县是研究区内受灾最严重的区域,其CIFD指数值居于研究区内各受灾县市之首,该县受灾总面积以及多次被淹的灾区面积均高于其他县市。     

城市绿化屋顶的微气候调节与径流削减效应研究

快速城市化与气候变化双重作用下,热岛效应与城市内涝成为最为突出的城市环境问题。绿化屋顶因能有效利用闲置屋面添緑、帮助城市缓解热岛和暴雨径流而受到关注。以往研究较多探讨单种气象条件下、单个小面积实验型绿化屋面的气候水文调节功能,本研究基于夏秋两季的微气候水文观测数据,定量分析不同气象条件下5种典型绿化屋顶的降温和径流削减效应。首先选择晴朗、多云、降雨3种典型夏日天气条件,分析草坪、裸土、菜地、小面积花园、大面积花园5种类型绿化屋顶与对照光屋顶之间的温度差日变化规律,探讨绿化屋顶热效应强度及时空特征;其次,选择暴雨、大雨、中雨及小雨4次典型降雨,分析大面积草坪与花园型绿化屋顶上的降雨-滞蓄过程及径流削减率。研究结果表明:绿化屋顶降温与升温效应并存,晴朗无风天气条件下,距离屋面10 cm和150 cm两个高度上,绿化屋顶最高可降低气温5.3℃和2.5℃,多云及降雨天气条件下降温强度下降,升温时段延长;白天草坪与裸土上的大气温度高于对照光屋顶,其它绿化屋顶的温度低于对照屋顶;夜间5个绿化屋顶的大气温度均低于对照屋顶,且降温效应按照大面积花园、草坪、小面积花园、裸土、菜地的顺序递减。绿化屋顶径流削减效益与绿化类型及降雨强度密切相关,花园型绿化对一次典型暴雨、大雨、中雨、小雨的径流削减率分别为50.8%、78%、100%、100%,简易型绿化的4次径流削减率分别为24.3%,58.6%,98.2%和100%。研究结果可为同气候区其他城市绿化屋顶环境设计及管理提供一定参考价值。     

Does community resilience mitigate loss and damage from climaterelated disasters? Evidence based on survey data

Policy-makers view community resilience as fundamental to mitigating loss and damage from climate-related disasters. Although energy has been devoted to defining resilience, less effort has been devoted to analysing the effects of resilience on loss and damage, which is critical in places with limited capacity for adaptation. We use survey data to develop a composite index of community resilience in Fiji and then evaluate the extent to which community resilience mitigates loss and damage. We find that community resilience is negatively correlated with damages over which human intervention may be effective, but not with damages over which intervention is less effective, suggesting that community resilience may limit impacts. We further find that this result holds for a cyclone (about which communities had substantial advance warning) but not for river flooding (for which communities had little advanced warning), suggesting that early warning is necessary for community resilience to become responsive.     

Physically Based,Hydrologic Model Results Based on Three Precipitation Products1

Abstract: The main objective of the study is to examine the accuracy of and differences among simulated streamflows driven by rainfall estimates from a network of 22 rain gauges spread over a 2,170 km² watershed, NEXRAD Stage III radar data, and Tropical Rainfall Measuring Mission (TRMM) 3B42 satellite data. The Gridded Surface Subsurface Hydrologic Analysis (GSSHA), a physically based, distributed parameter, grid‐structured, hydrologic model, was used to simulate the June‐2002 flooding event in the Upper Guadalupe River watershed in south central Texas. There were significant differences between the rainfall fields estimated by the three types of measurement technologies. These differences resulted in even larger differences in the simulated hydrologic response of the watershed. In general, simulations driven by radar rainfall yielded better results than those driven by satellite or rain‐gauge estimates. This study also presents an overview of effects of land cover changes on runoff and stream discharge. The results demonstrate that, for major rainfall events similar to the 2002 event, the effect of urbanization on the watershed in the past two decades would not have made any significant effect on the hydrologic response. The effect of urbanization on the hydrologic response increases as the size of the rainfall event decreases.     

Intra-particle migration of mercury in granular polysulfide-rubber-coated activated carbon (PSR-AC)

The depth profile of mercuric ion after the reaction with polysulfide-rubber-coated activated carbon (PSR-AC) was investigated using micro-X-ray fluorescence (μ-XRF) imaging techniques and mathematical modeling. The μ-XRF results revealed that mercury was concentrated at 0-100 μm from the exterior of the particle after 3 months of treatment with PSR-AC in 10 ppm HgCl₂ aqueous solution. The μ-X-ray absorption near edge spectroscopic (μ-XANES) analyses indicated HgS as a major mercury species, and suggested that the intra-particle mercury transport involved a chemical reaction with PSR polymer. An intra-particle mass transfer model was developed based on either a Langmuir sorption isotherm with liquid phase diffusion (Langmuir model) or a kinetic sorption with surface diffusion (kinetic sorption model). The Langmuir model predicted the general trend of mercury diffusion, although at a slower rate than observed from the μ-XRF map. A kinetic sorption model suggested faster mercury transport, which overestimated the movement of mercuric ions through an exchange reaction between the fast and slow reaction sites. Both μ-XRF and mathematical modeling results suggest mercury removal occurs not only at the outer surface of the PSR-AC particle but also at some interior regions due to a large PSR surface area within an AC particle.     

PCR技术在水体微生物检测中的应用

聚合酶链式反应(PCR)技术因其特异性强、灵敏度高以及快速简便等优点广泛应用于水体微生物的检测。综述了PCR技术的原理、方法及其在水体微生物检测中的研究进展。主要介绍了该技术应用于水环境中微生物病原体的检测、污水生物处理过程的监测与评价中的重要意义以及本实验室在该领域的研究进展。PCR技术为在分子水平上进行环境微生物的结构、多样性分析提供了有力的实验手段,有着广泛的应用前景。     

树脂基复合材料模拟海洋环境长期老化及失效行为

目的 实现高性能树脂基复合材料的环境适应性评价和使用寿命预测。方法 选取玻璃纤维增强不饱和聚酯(GF/197S)与玻璃纤维增强乙烯基脂(GF/905-2)2种树脂基轻质复合材料,开展模拟海洋环境实验室盐雾、湿热和盐水浸泡环境9 600 h的加速老化试验。基于4种力学性能(拉伸强度、弯曲强度、压缩强度及层间剪切强度)开展材料老化行为规律研究,利用傅里叶变换衰减全反射红外光谱(ATR-FTIR)对树脂基体在3种加速老化环境中的分子链段与官能团变化情况进行分析,得到基体树脂的老化机理。利用外观、超声扫描成像、SEM分析树脂纤维界面的变化情况,明确树脂/纤维界面的失效模式。利用差示扫描量热分析(DSC)与热重分析(TG)分析3种加速老化方式对玻璃纤维增强树脂复合材料(GFRPC)的玻璃化转变温度(tg)与热质量损失的影响。结果 3种老化方式对树脂基体的老化影响顺序依次为70 ℃/95%RH湿热、35 ℃盐雾、常温盐水浸泡。结论 得到了先进轻质树脂基复合材料的模拟海洋环境老化行为、失效模式以及树脂基体的老化机理,为实现高性能树脂基复合材料的环境适应性评价和使用寿命预测奠定了基础。