浅谈对热电企业的环境监督管理

对热电企业的环境监管工作是环保部门的重要职责,根据在对热电企业日常监管中遇到的问题,论述了监管的常用方法,包括监督企业环境管理落实情况、核查企业环保数据真实性及重视群众对企业的监督,并就相关工作展开了具体讨论。     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

中水回用于火电厂循环水存在问题探讨

水资源短缺已成为制约火电厂建设与发展的瓶颈。近年来,火电厂为提高水的利用率、降低新鲜水取水量而采用了以城市污水处理厂出水（中水）为水源,经深度处理后回用于循环水的节水方法。分析了该方法的优缺点,并针对实施过程中出现的问题提出了解决方案,使中水作为水源用于火电厂循环水更加具有实用性。     

上海火电厂烟气脱硫现状分析与建议

介绍了上海火电厂烟气脱硫的现状,对脱硫工艺选择、脱硫效率进行了分析。阐明了我国烟气脱硫普遍选用的石灰石一石膏湿法脱硫的特点和局限性,探讨了建立SO2排污权交易制度的必要性和可行性,分析了烟气脱硫装置存在的问题及预防措施。     

我国电力行业CO2减排技术及应用前景分析

阐述了我国燃煤电厂CO2排放现状及趋势,将CO2减排技术分为捕集与封存两个部分进行讨论,介绍了目前主要的CO2捕集与封存技术及其研究进展,并分析了各种技术的特点及其在我国电力行业的应用前景。指出电厂位置、CO2捕集方案及封存方式三者之间是相互影响、相互制约的,其中CO2去向是关键因素,处于不同地理位置的电厂需根据具体情况选择相适应的CO2捕集与封存技术的组合。探讨了各种捕集与封存技术的应用前景,建议由国家相关部门或行业支持,建设国家或行业层面的工业化试验中心或试验台。     

Stand-alone wind power system with battery/supercapacitor hybrid energy storage

This paper presents a stand-alone wind power system with battery/supercapacitor hybrid energy storage. A stand-alone wind power system mainly consists of a wind turbine, a permanent magnet synchronous generator, hybrid energy storage devices based on a vanadium redox flow battery and a supercapacitor, an AC/DC converter, two bidirectional DC/DC converters, a DC/AC converter and a variable load. Several control strategies for the stand-alone wind power system are involved such as a maximum power point tracking (MPPT) control, a vanadium redox flow battery charge/discharge control and a supercapacitor charge/discharge control. The proposed MPPT control combines a sliding mode control with an extreme search control to capture maximum wind energy. This strategy avoids the necessity of measuring wind velocity, obtaining models or parameters of the wind turbine and calculating the differentials of the power generated from the wind power system and from the speed of the generator. The battery charge/discharge control maintains a constant DC bus voltage. When the battery charging/discharging current reaches the setting threshold, the charge/discharge control of the supercapacitor is triggered to limit the charging/discharging current of the battery. The simulation results show that the proposed method can rapidly respond to variations in wind velocity and load power.     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

丙烯腈生产废水中聚合物的资源化利用

以丙烯腈生产废水中的丙烯腈低聚物为原料制备聚丙烯酰胺。通过正交实验考察了水解反应条件和交联反应条件对反应的影响。FTIR表征结果显示,丙烯腈低聚物中的氰基已完全水解为酰胺基,产物聚丙烯酰胺中含有酰胺基和羧基。实验结果表明,在自来水加入量100 m L、水解反应温度95℃、m(Na OH)∶m(丙烯腈低聚物)=2.0、水解反应时间3 h的最佳水解反应条件,交联反应温度60℃、质量分数37%~40%的甲醛加入量6 m L、交联反应时间2 h的最佳交联反应条件下,处理20 g丙烯腈低聚物,可得到产物聚丙烯酰胺14.50 g,聚丙烯酰胺的水解度为21.1%、相对分子质量为2.7×106。产品性能满足Q/SH 0046—2007《钻井液用聚丙烯酰胺技术要求》中部分水解聚丙烯酰胺的性能要求。     

基于分布型电力系统的 PSO 优化设计

优化了传统粒子群算法,运用了混沌算法对粒子做初始化,优化了传统粒子群算法的收敛特性,并在算法的优化过程中,增加了混沌干扰元素对整体最优化极值做混沌干扰,将符合杂交几率的优化粒子做杂交处理,提高了粒子群的种类,增强了粒子群算法的搜寻水平。并通过IEEE33节点的分布型电力系统做无功优化仿真验证,通过比较,验证了优化算法的优越性与准确性。     

燃机电厂噪声模拟时SoundPLAN声源模型的简化

燃机电厂一般靠近用电负荷或城镇建设,为了有效地控制噪声,在燃机电厂项目的设计、环评等阶段对其噪声影响进行合理的模拟从而提出相应的降噪方案是非常必要的。结合国家标准,对燃机电厂的敏感目标和主要噪声的声源特性进行了总结。通过对比声源类型、中心频率的设置对模拟结果产生的影响,探讨了在应用SoundP-LAN软件对燃机电厂的噪声模拟时如何简化设置声源模型的问题,为今后的噪声模拟评估工作提供参考。