长输管道泄漏检测技术进展浅析

简述了长输管道泄漏检测技术的进展情况,介绍了4种泄漏检测技术原理,并对比分析了各种技术的特点和应用范围,为管道的安全运行管理和维护决策提供了技术参考。     

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation a ect mercury removal e ciently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor a ecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation e ciency reached 71.0%. Therefore, oxidized mercury removal e ciency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%–96.8% of oxidized mercury was controlled, but only 54.9%–68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal e ciency was 95.9%–98.0%, and there was a big di erence in the total mercury removal e ciencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.     

Linking Russia with the European and global greenhouse gas emissions trading markets: three paths for greening the Russian assigned amount under the Kyoto Protocol

This article examines possibilities for linkage between the European Union Emissions Trading System (EU ETS) and Russia, with a view to enhancing cooperation on a broader scale than the project-based approaches that have been tested thus far. Three paths for possible EU-Russia linkage are presented by which the Russian Assigned Amount under the Kyoto Protocol can be greened in order to stimulate emissions trading: 1. Joint implementation—reductions earned via individual projects in Russia; 2. Greened allowances or green investment schemes; and 3. Linked cap-and-trade systems, in which a Russian domestic emissions trading system would link with the European Union Emissions Trading System. The authors conclude that the third option, emissions trading through linked domestic emissions trading systems, offers the best opportunities at the lowest transaction costs. The authors discuss useful innovative instruments like call options and slip level arrangements on government-to-government and business-to-business levels.

声激励锚杆轴力监测传感器的研制

根据现有的锚杆支护方式,提出一种采用声激励来监测锚杆轴力的新方法,该方法属于无损检测。阐述了锚杆轴力监测传感器的基本原理,介绍了传感器的构造及参数的设置,从强度、模态、声学3个方面进行了详细说明,分析了共振板的厚度变化对声学性能的影响。结果表明,该传感器满足设计要求,方法可行、有效。     

多层次灰色关联分析在绿色建筑设计方案优选中的应用

在新修订的《绿色建筑评价标准》(GB/T 50378—2014)的基础上,综合考虑了与绿色建筑设计方案评价相关的内容,构建出绿色建筑设计方案评价指标体系。在专家打分的基础上,通过层次分析法(AHP法)给各评价指标赋予了权重,运用多层次灰色关联分析模型分层次计算出各评价方案与理想方案的最终关联度并排序,进而确定最优方案,并通过引入实例验证了该评价方法的科学性和实用性。     

Seat strength in rear body block tests

Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.

Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).

Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.

Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors.     

基于全隧道方案的渤海海峡跨海通道工程环境影响研究

渤海海峡跨海通道是疏通中国干线交通网战略布局中的咽喉工程,因工程规模浩大,其环境影响广泛而深远.简要回顾了工程建设方案的筛选进程及“深埋式全隧道”方案的环境优势;建议工程环境影响评价采用“协作型”环境影响评价模式,以合作和协调克服各方之间的分歧和矛盾;初步探讨了工程前期调研的主要内容;识别分析了通道工程对近岸海域、出入口城市的主要环境影响.结果表明:与其他方案相比,深埋式全隧道方案对自然人文景观、海洋生态环境、海洋资源开发利用等的影响是最小的,并提出了消除或减缓不良环境影响的对策措施,为通道工程的立项决策提供科学依据.     

航空发动机涡轮叶片热障涂层冲蚀试验装置的研制

目的通过研制热障涂层冲蚀服役环境的模拟装置,来研究冲蚀失效机制。方法通过研制模拟热障涂层高温热冲击的燃气喷枪,在喷枪中设计速度、流量可控的颗粒送料系统,同时在装置中集成裂纹演化实时检测的声发射系统。结果该系统实现了热障涂层冲蚀服役环境的模拟,温度场、裂纹演化损伤参量的同步采集、输出与显示,从而完成了冲蚀服役环境模拟与关键损伤参量实时检测的一体化设计。结论装置能完成热障涂层常温、高温等各种服役温度、各种冲蚀角度、各种冲蚀速度等条件下的模拟试验,并提供较为系统的损伤参量检测数据,为理解热障涂层的冲蚀机理、优化其设计制备提供有效的试验数据。     

海洋环境数据库的数据依赖识别方法

设计达到第三范式标准的数据库模式,是数据库建设的关键.本文针对海洋环境数据基本为调查数据、数据之间因缺乏业务逻辑无法确立依赖关系的现状,提出了根据现有数据模式识别数据依赖的方法,并应用于数据库模式的规范化设计,通过理论和实践证明海洋环境数据库模式设计达到第三范式标准,成功应用于城市风暴潮防灾减灾辅助决策支持系统等项目建...     

一种改进的边界层参数化模式

在能量平衡方法的基础上提出一套利用常规气象资料求取边界层参数的改进方案。利用中国科学院大气物理研究所铁塔观测资料,与廓线法进行对比分析,表明这种方案具有输入要求少,输出信息量大,结果合理的优点。此外,对此方案中的4个可变参数作了敏感性试验,结果表明湿度变化参数α的敏感性较强,在使用时应当合理选择其数值。该方案可以满足新一代空气质量模式对边界层参数化的需求。同时,由于仅需常规气象资料就能求取所有的边界层参数,因此特别适合于空气质量模式的法规应用。