基于碳源储存的污水生物脱氮除磷效率及污水处理系统延伸成本分析

以我国北方某改良型A²/O工艺 (设计规模6×10⁴ m³·d⁻¹) 为例,基于一年的运行数据,考察碳源储存与生物脱氮除磷能力之间的关系,分析碳源利用效率和能耗情况。结果表明：在7—9月,系统碳源的综合利用效率为53%~55%,这说明消耗的碳源中超过50%比例用于生物脱氮除磷;反硝化菌较聚磷菌对环境的变化更敏感;外加碳源的延伸成本占直接成本的20.5%。因此,污水处理厂应充分考虑进出水水质及环境条件变化对碳源有效利用的影响。本研究结果可为减污降碳协同增效背景下城市污水处理厂A²/O工艺及其他常规工艺的优化调控提供参考。     

Kosetice, Czech Republic--ten years of air pollution monitoring and four years of evaluating the origin of persistent organic pollutants

The regional observatory Kosetice is a central European background station. Unique continuous monitoring from 1988 on is held here. POP (persistent organic pollutant) concentration values of air samples from Kosetice taken between 1996 and 2005 were statistically processed. Values of Czech ambient air quality standards were not exceeded. Concentrations of polycyclic aromatic hydrocarbons reached two maxima, in 1996 and 2001-2002. Polychlorinated biphenyls concentrations reached the highest values in 1997 and 1998 and hexachlorocyclohexanes concentrations in 1998. DDTs, hexachlorobenzene and pentachlorobenzene were analysed as well. Long-range transport of pollutants between 2002 and 2005 was evaluated using the Potential Source Contribution Function hybrid receptor model. Indicated potential source areas of PCBs coincide with many well-known urban and industrialised areas, while the indicated potential source areas of HCHs and DDTs coincide with many agricultural and/or forested regions and the potential source areas of HCB comprise all land use types.     

以聚己内酯作为生物反硝化固体碳源的研究

为解决水体因低碳氮比而导致脱氮效率差的问题,将颗粒聚己内酯(PCL)重新塑形为阶梯环状,研究其作为反硝化过程的生物膜载体与固相碳源的反硝化性能。结果表明,在静态实验中,平均反硝化速率为8.57 mg NO3-N/(L·h);反硝化过程为零级反应。连续填充床实验中,超过90%的硝酸盐可被去除,出水NO2-N质量浓度低于0.20 mg/L;出水NH3-N质量浓度略有上升;出水溶解性有机碳(DOC)先上升后降低至1 mg/L左右。电子扫描显微镜扫描显示,PCL阶梯环反应表面空隙率较高,表面生物膜以杆菌为主,反应后被明显腐蚀;液相色谱检测显示PCL阶梯环分子量反应前后略有下降,其结构未受到破坏;表明该材料适合作为反硝化反应的碳源的同时,又可以作为载体供微生物附着生长。     

不同混凝剂处理松花江低温水

东北松花江地区冬季有将近6个月的冰封期,低温季节水源水处理难度大。为了保证东北地区冬季饮用水供应,研究几种混凝剂在处理冬季松花江低温水时的混凝效果。实验结果表明,NPAC1和NPAC2水解产物中具有较高的Alb和Alc成分,拥有较高的电中和、吸附和网捕卷扫性能,高效聚铝铁(PAF)水解产物Fe(OH)3具有比表面积大、吸附架桥作用较强的优点。这3种混凝剂无论是在控制出水浊度还是在对水体有机物去除能力方面均优于目前水厂所使用的PAC和聚合氯化铝铁(水厂PAF);NPAC2的投加量达到50 mg/L时,出水浊度达到最优;当混凝剂投加量达到50 mg/L时,NPAC1的浊度去除率逐渐超过NPAC2,剩余浊度低于3.0 NTU;NPAC1、NPAC2和PAF 3种混凝剂对有机物的去除能力大致相当,当混凝剂投加量为50 mg/L时,这3种混凝剂处理后的水的UV254的值均低于0.06,而水厂使用的2种混凝剂处理后的水的UV254仍高于0.1;结合其对浊度去除的情况,可以判断55 mg/L的投药量为NPAC1的最优投药点,PAF的最佳投药量为65 mg/L;投加适量的粉末活性碳可以有效地提高氨氮的去除率,当粉末活性炭的投加量为30 mg/L时,氨氮的去除率基本达到最大(51.27%)。表面负荷对混凝效果具有重要的影响,合理降低沉淀池的表面负荷对于提高出水水质具有重要作用。     

芦苇碳源-表面流人工湿地对农田退水脱氮的长期效能研究

针对农田退水NO₃^--N占比高、C/N低,氮污染难以去除的问题,将经济易得的芦苇(Phragmites australis)茎叶碎段装填在表面流人工湿地(packed surface flow construct wetland,PSFW)的表层作为外加碳源,以研究其长期运行情况下的脱氮效能。结果表明：第29~149天,外加芦苇茎叶碎段的PSFW的脱氮效能明显高于无芦苇茎叶碎段的空白PSFW₀;进水NO₃^--N和TN浓度分别为(16.4±1.0)和(17.7±2.0)mg/L,HRT按3、4和2 d运行时,HRT为4 d时脱氮效能最优,PSFW对NO₃^--N和TN去除率分别为(87.4±6.0)%和(74.1±6.0)%,PSFW₀去除率仅为(14.4±4.0)%和(14.4±3.0)%;第150~269天,PSFW的脱氮效能稍高于PSFW₀,在进水NO₃^--N和TN浓度分别为(10.4±1.0)和(10.8±1.0)mg/L,HRT按3、2和1 d运行时,HRT为3 d时脱氮效能最优,PSFW对NO₃^--N和TN的去除率分别为(91.9±7.0)%和(90.2±7.0)%,PSFW₀去除率分别为(91.3±5.0)%和(86.4±6.0)%。第270~334天,PSFW的脱氮效能稍低于PSFW₀;进水NO₃^--N和TN浓度分别为(5.7±0.4)和(7.2±0.8)mg/L,HRT为3 d时,PSFW对NO₃^--N和TN的去除率分别为(88.6±10.0)%和(82.5±7.0)%,PSFW₀去除率分别为(94.0±6.0)%和(87.8±3.0)%。     

京津冀地区细颗粒物污染来源实时预报系统的构建和初步应用

基于区域空气质量数值模型和源示踪技术,构建污染来源预报系统,实现了京津冀地区污染来源的实时预报。针对预报中最迫切的时效限制,在系统的源排放预处理、污染物来源贡献计算方案、业务化运行等方面进行特别的设计,主要包括：开发出快速源排放前处理技术;通过试算确定了分区域和行业的污染来源追踪方案;采用目前2种主流的并行计算方式混合编译区域空气质量模型并运行;设计了业务化运行中多任务的分布式计算方案,以充分利用计算资源。这些优化措施有效地缩短了预报时间。目前系统已处于业务化运行阶段,每天08：00之前,预报出未来3 d的区域空气质量,同时给出关注区域主要污染物分区域和行业的来源贡献状况;系统已应用在庆祝抗战胜利70周年阅兵期间空气质量保障后评估,以及2015年11月底—12月初京津冀重污染预警等应急工作中。     

武烈河流域水质污染特征及污染源解析

以武烈河流域2014年1—12月23项指标的监测数据为基础,采用单因子评价法和水质综合指数评价法,对水质污染特征进行综合评价;运用主成分分析法,确定流域主要污染因子及区域水质空间变化特征,并进一步对流域污染来源进行解析。结果表明：武烈河流域上游支流水质为Ⅱ类,干流段监测断面S1与S3水质为Ⅲ类,S2与S4水质为Ⅳ类,主要污染指标为BOD₅与TP;流域水质由2个主成分组成,COD_Cr、COD_Mn为第一主成分,NH₃-N、DO与BOD₅为第二主成分;流域主要污染源包括生活污水、工业废水、农业化肥和农药的投入和畜禽养殖废水等。     

Development and Adoption of a Simple Nonpoint Source Pollution Model for Port Phillip Bay,Australia

New computing tools and approaches allow tailored development of software to meet the needs of environmental managers. The processes required for such tailoring fit well with adaptive management concepts where, as knowledge and system understanding develop among managers, the software can be developed or replaced to match. This paper reports on development and adoption of a simple nonpoint source pollution modeling tool, including technical aspects of data support for modeling and social aspects of software design. The software, named FILTER, used a unit load model to generate expected pollutant loads from subcatchments of Port Phillip Bay, Australia. Monitoring data were used for calibration to modify the delivery of generated pollutants to receiving waters. Spatial, tabular, and charting software components were used to provide alternative forms of output visualization. FILTER was developed using a process that resulted in manager-stakeholders taking responsibility for setting of model parameter values and operation of the user interface, thereby encouraging uptake. The inclusive development process, tailoring of the software to manager needs and styles of usage, and matching of model complexity to data and knowledge, resulted in a successful application that has become the current agreed system representation among disparate stakeholder organizations.     

ENHANCEMENTS OF NONPOINT SOURCE MONITORING OF VOLATILE ORGANIC COMPOUNDS IN GROUND WATER1

ABSTRACT: The U.S. Geological Survey (USGS) has compiled a national retrospective data set of analyses of volatile organic compounds (VOCs) in ground water of the United States. The data are from Federal, State, and local nonpoint‐source monitoring programs, collected between 1985–95. This data set is being used to augment data collected by the USGS National Water‐Quality Assessment (NAWQA) Program to ascertain the occurrence of VOCs in ground water nationwide. Eleven attributes of the retrospective data set were evaluated to determine the suitability of the data to augment NAWQA data in answering occurrence questions of varying complexity. These 11 attributes are the VOC analyte list and the associated reporting levels for each VOC, well type, well‐casing material, type of openings in the interval (screened interval or open hole), well depth, depth to the top and bottom of the open interval(s), depth to water level in the well, aquifer type (confined or unconfined), and aquifer lithology. VOCs frequently analyzed included solvents, industrial reagents, and refrigerants, but other VOCs of current interest were not frequently analyzed. About 70 percent of the sampled wells have the type of well documented in the data set, and about 74 percent have well depth documented. However, the data set generally lacks documentation of other characteristics, such as well‐casing material, information about the screened or open interval(s), depth to water level in the well, and aquifer type and lithology. For example, only about 20 percent of the wells include information on depth to water level in the well and only about 14 percent of the wells include information about aquifer type. The three most important enhancements to VOC data collected in nonpoint‐source monitoring programs for use in a national assessment of VOC occurrence in ground water would be an expanded VOC analyte list, recording the reporting level for each analyte for every analysis, and recording key ancillary information about each well. These enhancements would greatly increase the usefulness of VOC data in addressing complex occurrence questions, such as those that seek to explain the reasons for VOC occurrence and nonoccurrence in ground water of the United States.     

水上溢油环境风险源确定研究

依据泄漏进水域的最大油品量、水域环境敏感性等两个主要因素,研究确定了江苏油田水上(临水)设施环境风险源等级,并针对不同的风险源阐述了降低风险等级的技术方法和预防措施,为加强江苏油田环境风险防患、提高应急处理能力提供了依据。