Status and Trends of Dissolved Oxygen in Corpus Christi Bay, Texas, U.S.A.

The purpose of this studywas to determine status and long-term trends of dissolved oxygen concentrations (DO) in Corpus Christi Bay, Texas, U.S.A. A 20-year record of randomized stations was used to determine the trend of surface water DO, salinity, and temperature over space and time. A 13-year record of two fixed stations was used to determine the temporal nutrient trends. A 10-year record of fixed stations in the southeastern region of Corpus Christi Bay was used to determine the status of disturbance caused by low DO in bottom waters. From 1982 to 2002, there was a significant decrease in surface water DO at a rate of 0.06 mg L⁻¹ yr⁻¹ and a significant increase in surface water temperature at a rate of 0.07°C yr⁻¹. The southeastern region of Corpus Christi Bay had the lowest average DO, and during July and August, DO are steadily declining at a rate of 0.09 mg L⁻¹ yr⁻¹. It is not likely that eutrophication is causing hypoxia, because freshwater inflow rates have significantly decreased since 1941 and nutrient levels have not changed from 1987 to 2000. Even though long-term trends indicate that average surface DO is decreasing, disturbance by hypoxia appears to be stable, but this may be due to just eight years of data. In fact, if the current trend continues, surface water DO will not meet exceptional aquatic life standards (≤5 mgL⁻¹) in 2032.     

A Spatial Model to Estimate Habitat Fragmentation and Its Consequences on Long-Term Persistence of Animal Populations

The increasing use of the landscape by humans has led to important diminutions of natural surfaces. The remaining patches of wild habitat are small and isolated from each other among a matrix of inhospitable land-uses. This habitat fragmentation, by disabling population movements and stopping their spread to new habitats, is a major threat to the survival of numerous plant and animal species. We developed a general model, adaptable for specific species, capable of identifying suitable habitat patches within fragmented landscapes and investigating the capacity of populations to move between these patches. This approach combines GIS analysis of a landscape, with spatial dynamic modeling. Suitable habitat is identified using a threshold area to perimeter ratio. Potential movement pathways of species between habitat patches are modeled using a cellular automaton. Habitat connectivity is estimated by overlaying habitat patches with movement pathways. The maximum potential population is calculated within and between connected habitat patches and potential risk of inbreeding within meta-populations is considered. The model was tested on a sample map and applied to scenario maps of predicted land-use change in the Peoria Tri-county region (IL). It (1) showed area of natural area alone was insufficient to estimate the consequences on animal populations; (2) underscored the necessity to use approaches investigating the effect of land-use change spatially through the landscape and the importance of considering species-specific life history characteristics; and (3) highlighted the model's potential utility as an indicator of species likelihood to be affected negatively by land-use scenarios and therefore requiring detailed investigation.     

A modular approach to Integrated Assessment modeling

In this paper, we present a new approach to model coupling that probably forms the methodological basis of a new generation of Integrated Assessment models. This approach respects the knowledge and expertise that is embodied in existing models and encourages their gradual evolution. Modularity is the guiding principle. Our approach is distinguished by the way modules are coupled which is based on an interplay of a job control module, a numerical coupling module, and a couple of stand-alone functional modules. The numerical coupling module - the core component - serves to treat the feedbacks between the functional modules. A first implemented example that couples an economic and a climate module by means of a two-phase meta-optimization is presented here. The algorithm and mathematical structure behind are discussed as well as important features such as convergence behavior and reliability.     

Macroinvertebrate Regionalisation for use in the Management of Aquatic Ecosystems in Victoria, Australia

The development of a broader, more holistic approach to aquaticecosystem management has been called for in recent years. Physical and chemical objectives alone are no longer consideredsufficient for the protection of aquatic ecosystems and shouldbe supplemented with biological objectives. The ubiquitousand sedentary nature of macroinvertebrates, combined with theirmeasurable response to environmental conditions, favour their use as important indicators in environmental policies. To establish biological objectives, there is a need for a regionalframework to limit the variability between ecosystems. Past studies have demonstrated that an a posteriori regionalisationapproach may be more useful than an a priori approach in explaining single component (e.g. macroinvertebrates) patternsacross ecosystems. This is particularly important as aquaticresource management agencies often focus on one or twocomponents of the ecosystem to assess environmental health. This study uses an a posteriori method to delineate and describebiological regions based on edge and riffle macroinvertebrate data. The regionalisation will provide a framework for settingbiological objectives, based on the range of reference conditionsmeasured within each separate region. The objectives will includeregional checklists for taxa and biotic indices. Predictive modelling in the style of RIVPACS or AUSRIVAS will also be usedwithin each region to develop objectives, incorporating local, regional and systematic features as predictor variables.     

RISK ASSESSMENT METHODOLOGY FOR KARST AQUIFERS: (2) SOLUTE-TRANSPORT MODELING

Ground-water flow and solute-transport simulation modeling are major components of most exposure and risk assessments of contaminated aquifers. Model simulations provide information on the spatial and temporal distributions of contaminants in subsurface media but are difficult to apply to karst aquifers in which conduit flow is important. Ground-water flow and solute transport in karst conduits typically display rapid-flow velocities, turbulent-flow regimes, concentrated pollutant-mass discharge, and exhibit open-channel or closed-conduit flow. Conventional ground-water models, dependent on the applicability of Darcy`s law, are inappropriate when applied to karst aquifers because of the (1) nonapplicability of Darcian-flow parameters, (2) typically nonlaminar flow regime, and (3) inability to locate the karst conduits through which most flow and contaminant transport occurs. Surface-water flow and solute-transport models conditioned on a set of parameters determined empirically from quantitative ground-water tracing studies may be effectively used to render fate-and-transport values of contaminants in karst conduits. Hydraulic-flow and geometric parameters developed in a companion paper were used in the surface-water model, TOXI5, to simulate hypothetical slug and continuous-source releases of ethylbenzene in a karst conduit. TOXI5 simulation results showed considerable improvement for predicted ethylbenzene-transport rates and concentrations over qualitative tracing and analytical ground-water model results. Ethylbenzene concentrations predicted by TOXI5 simulations were evaluated in exposure and risk assessment models.     

Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

Modeling rhizofiltration: heavy-metal uptake by plant roots

The discovery of phytoaccumulation potential of plant species has led to its application for remediation of heavy-metal-contaminated soil and wastewater, which is termed as phytoextraction/rhizofiltration. For prediction, analysis, planning and cost-effective design of such systems, mathematical models not only are used as a screening tool but also provide optimal parameters like harvesting time, irrigation schedule, etc. Several laboratory and field scale studies have been carried out in the past, and mathematical expressions have been developed by various researchers for different phenomena like metal adsorption in soil, plant root growth with time, moisture and metal uptake by plant root, moisture movement in unsaturated zone, soil moisture relationship, etc. The complete design of any such phytoremediation program would require the knowledge of behavior of heavy-metal movement in soil, water and plant root system. In this paper, a model for simulating heavy-metal dynamics in soil, water and plant root system is developed and discussed. The governing non-linear partial differential equation is solved numerically by implicit finite difference method using Picard's iterative technique, and the formulation has been illustrated using a characteristic example. The source code is written in MATLAB.     

Test of a Modelling System for Estimating Nitrogen Leaching – A Pilot Study in a Small Agricultural Catchment

Nitrogen leaching is a world-wide concern for the quality of ground- and surfacewater. Measures to abate this is still limited by a lack of understanding mechanisms behind all factors describing the leaching process, time lags between countermeasures and improvement in waterquality and spatial distribution of nitrogen leaching. The purpose of this study was to do an initial test of the SOILNDB model system which is built on the existing mechanistic SOIL and SOILN models and an automatic parameterization procedure for use of simplified input data. The test was done by simulating nitrogen leaching from each of the 150 fields in a small catchment during a three-year study period. The simulated mean root-zone nitrogen leaching rate from all the fields in the catchment was compared to measurements of nitrogen flow in the stream draining the catchment and showed good agreement in between-year dynamics.     

Assessing land use impacts on flood processes in complex terrain by using GIS and modeling approach

A distributed hydrologic modeling and GIS approach is applied for the assessment of land use impact in the Steinsel sub-basin, Alzette, Grand-Duchy of Luxembourg. The assessment focuses on the runoff contributions from different land use classes and the potential impact of land use changes on runoff generation. The results show that the direct runoff from urban areas is dominant for a flood event compared with runoff from other land use areas in this catchment, and tends to increase for small floods and for the dry season floods, whereas the interflow from forested, pasture and agricultural field areas contributes to the recession flow. Significant variations in flood volume, peak discharge, time to the peak, etc., are found from the model simulation based on the three hypothetical land use change scenarios.