一种硫离子响应杀菌材料的制备及应用研究

目的制备硫离子响应杀菌材料,研究它在不同浓度铜离子条件下的封装效果,以及在不同浓度硫离子条件下的释放行为。方法选择埃洛石纳米管为载体并用透射电镜进行表征、采用真空负载的方式,将甲硝唑和苯骈三氮唑(BTA)分步填充到埃洛石纳米管内部,使用紫外分光光度法测试不同浓度铜离子对纳米管中甲硝唑的封堵效果,以及材料在不同浓度硫离子条件下的释放情况。结果实验中通过调整铜离子浓度发现,铜离子浓度越大对甲硝唑的封堵效果越好,当铜离子浓度达到160 mmol/L时,对甲硝唑的封堵效果最好。杀菌材料在外界硫离子达到0.1mmol/L后,甲硝唑的释放浓度迅速提高,进一步提高硫离子浓度,释放情况改变不明显。结论铜离子浓度达到160 mmol/L时,材料的封装效果是最好的。材料能够对硫离子实现响应释放,且对应的临界浓度为0.1 mmol/L。     

干旱与半干旱地区土地生产潜力的测定──以新疆阜康县为例

本文探讨了一个通过土壤有效水分含量来确定土地等级和土地生产力的方法。这个方法采用倍增参量形式来确定土壤有效水分。其变量包括潜水位、土层厚度、土壤质地、坡度和盐分。此项研究证明用这种方法获得的土地初级生产力与实测值比较一致。因此，我们可以在类似环境下用这种方法估测土地生产潜力。     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

Release of bioactive active iodine in kelp

The release process and influencing factors of bioactive iodine of kelp are systemically studied by leaching experiment. The results showed that the bioactive iodine of kelp can be released rapidly and the principal form of iodine in lixivium is I^- . There is a dynamic process between the release and absorption of iodine. With the increase of leaching water, the gross amounts of released iodine rise.There also exists a transforming process among I^- , IO3^- and organic iodine in lixivium.     

聚电解质溶液中粘土颗粒的ζ电位

分别测定了 5种不同分子量和 5种不同分子链电荷密度的阴离子聚电解质高分子在钠蒙脱石粘土颗粒表面吸附前后粘粒的ζ电位 ;讨论分析了分子结构和体系环境对粘粒 ζ电位的影响以及聚电解质对粘土 -水分散体系的稳定作用。     

呼和浩特市空气污染潜势预报方法研究

利用1995～1997和2000年资料，统计分析了呼市边界层气象条件和影响呼市地区的天气系统，寻找出了城市污染与天气的关系，据此研究制定了有利和不利于污染物扩散的天气形势和气象要素指标，给出了不同污染物的空气质量等级判据，从而建立了呼市污染潜势预报方法。     

高硫原油加工过程硫回收水平分析

分析了金陵分公司最近三年来加工高硫原油带入的硫在全厂炼油过程的分布情况。随着原油加工量及含硫量的快速增长，硫回收能力凸现不足，表明目前正在加速建设的加氢精制和硫磺回收装置是十分必要的，这将进一步提高综合硫回收水平。从长远来看，还需采用扩大加氢工艺能力，在提升产品质量的同时达到减少硫向环境排放的目的。     

城市供水管网漏损控制潜力研究

在我国各城市普遍缺水的同时，城市供水管网的漏损状况却相当的严重，科学衡量漏损控制的潜力，对于控制漏损和科学地进行城市水资源规划和需求管理非常重要。从技术潜力、经济潜力、社会潜力三方面将城市供水管网漏损控制的潜力进行了分析。提出了以社会最优值作为漏损控制的目标，以社会潜力作为需求管理的依据，同时综合考虑技术潜力和经济潜力。社会最优控制水平和企业的经济漏损控制水平之间有时会存在很大差异。科学的划分政府和企业在控制漏损的义务是非常必要的，如果需要企业的漏损控制水平小于经济漏损水平时政府应该给予一定的补偿，这样才能增加企业控制管网漏损的积极性。     

新疆玛纳斯河流域农业水资源可利用潜力分析

结合新疆玛纳斯河流域水文水资源、种植结构和节水技术发展等资料,从开源、节流两方面对流域近期(至2010年)、中远期(2010-2030年)农业水资源极限潜力、可挖掘潜力进行了估算。结果表明,就目前水资源的利用水平和开发趋势,玛纳斯河流域未来农业水资源的主要利用途径是开源与节流相结合,以节流为主。全流域尚有的农业灌溉水资源极限潜力为10.75×10⁸m³,近期农业水资源可挖掘潜力为2.13×10⁸m³,其中开源增水潜力0.40×10⁸m³,占18.8%,节流增水潜力1.73×10⁸m³,占81.2%;中远期农业水资源可挖掘潜力5.33×10⁸m³,其中开源增水潜力1.12×10⁸m³,占21.0%,节流增水潜力4.21×10⁸m³,占79.0%。该研究对区域制订节水灌溉规划及水资源系统优化配置具有重要参考价值。     

Effects of environmental factors on the production and release of matrix-bound phosphine from lake sediments

Effects of pH, temperature, and oxygen on the production and release of phosphine in eutrophic lake sediments were investigated under laboratory tests. Results indicated that the elimination of matrix-bound phosphine was accelerated under initial pH 1 or 12. Phosphine levels could reach maximum under initial pH 10. The contents of phosphine increased with the addition of alkali under pH 4–12. The rates of phosphine production and release from lake sediments varied with temperature. 20°C was the most favorable temperature for the production of matrix-bound phosphine. Oxygen showed little effect on matrix-bound phosphine. Matrix-bound phosphine concentrations in lake sediments were concluded to be dependent on a balance of natural generation and depletion processes. Translated from Acta Scientise Circumstantiae, 2005, 25(5): 681–685 [译自: 环境科学学报]