Dust Storms are an Indication of an Unhealthy Environment in East Asia

Dust storms frequently occur in Mongolia and in northern China. Each year there are 30 to 120 dusty days in source regions of Mongolia and 14–20 dusty days on the Korean Peninsula. Intense sand storms and associated dust falls produce environmental impacts in East Asia. This paper discusses the environmental degradation in Mongolia and the social, economic and atmospheric impacts of dust storms in the sink area. The impact of dust storms on environmental compartments as well as their direct and indirect consequences to basic resources like water and energy demand and supply is explained. Governments are encouraged to take appropriate action in specified regions. For monitoring dust storms there is a need for international cooperation to combat growing environmental and human security concerns.     

Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand

The creation of metal parts via casting uses molds that are generally made from sand and phenolic resin. The waste generated after the casting process is called waste foundry sand (WFS). Depending on the mold composition and the casting process, WFS can contain substances that prevent its direct emission to the environment. In Brazil, this waste is classified according to the Standard ABNT NBR 10004:2004 as a waste Class II (Non-Inert). The recycling of this waste is limited because its characteristics change significantly after use. Although the use (or reuse) of this byproduct in civil construction is a technically feasible alternative, its effects must be evaluated, especially from mechanical and environmental points of view. Thus, the objective of this study is to investigate the effect of the use of WFS in the manufacture of cement artifacts, such as masonry blocks for walls, structural masonry blocks, and paving blocks. Blocks containing different concentrations of WFS (up to 75% by weight) were produced and evaluated using compressive strength tests (35 MPa at 28 days) and toxicity tests on Daphnia magna, Allium cepa (onion root), and Eisenia foetida (earthworm). The results showed that there was not a considerable reduction in the compressive strength, with values of 35 ± 2 MPa at 28 days. The toxicity study with the material obtained from leaching did not significantly interfere with the development of D. magna and E. foetida, but the growth of the A. cepa species was reduced. The study showed that the use of this waste in the production of concrete blocks is feasible from both mechanical and environmental points of view.     

铸型旧砂再生方法及系统设施选择

通过实例,针对某铸造分厂砂处理生产工艺落后,旧砂对车间、环境及产品质量的影响,提出了建立旧砂再生系统的技术改造方案,阐述了旧砂干法再生方法及系统设施选择,分析了砂处理后取得的环境效益和经济效益。可为中小型铸造厂提供借鉴。     

城市污水回用三种处理工艺的选择

本文针对我国城市二级出水的特点,研究了污水深度处理的三种工艺:絮凝沉淀过滤、微絮凝过滤和直接过滤.装置采用网格反应池、翼片斜板沉淀池、气水同时冲洗粗砂滤池.药剂选用聚合硫酸铁,试验规模120m~3/d.     

Vegetation changes associated with barrier-dune construction on the outer banks of North Carolina

Manmade dunes are used to stabilize the barrier islands of the mid-Atlantic coast of the United States so that they are more amenable to development. Although this strategy has stabilized extensive sections of the barrier-island substrate, it has also caused significant ecological changes. The rate and pattern of the resulting vegetation changes along the Outer Banks of North Carolina were determined using sequential aerial photography. Successional trends have been altered in favor of more stable woody communities.     

GROUND-WATER RECHARGE THROUGH ACTWE SAND DUNES IN NORTHWESTERN NEVADA1

ABSTRACT: Most water-resouree investigations in semiarid basins of the Great Basin in western North America conclude that ground-water recharge from direct precipitation on the valley floor is negligible. However, many of these basins contain large areas covered by unvegetated, active sand dunes that may act as conduits for ground-water recharge. The potential for this previously undocumented recharge was investigated in an area covered by sand dunes in Desert Valley, northwestern Nevada, using a deep percolation model. The model uses daily measurements of precipitation and temperature th determine energy and moisture balances, from which estimates of long-term mean annual recharge are made. For the study area, the model calculated a mean annual recharge rate of as much as 1.3 inches per year, or 17 percent of the long-term mean precipitation. Model simulations also indicate that recharge would be virtually zero if the study area were covered by vegetation rather than dunes.     

砂尘试验箱原理分析改进及相关标准探讨

结合砂尘的产生和运动机理,对砂尘试验箱的设计原理和应用特点进行了说明,着重对吹砂程中空气的温度和湿度、砂尘颗粒直径比例进行了分析,对气固两相流中颗粒浓度的均匀性进行了探讨。基于砂尘的运动特性,国内应用较普遍采用的闭式循环吹砂试验设备,无法实现砂的有效分离,导致吹砂试验箱试验过程中颗粒直径比例不满足GJB 150.12A要求。在MIL-STD-810H中,已经取消了对吹砂试验相对湿度≤30%的要求。基于吹尘和吹砂引起的不同环境效应,结合吹尘和吹砂试验设备原理和国内已有设备的现状,对现有试验方法和校准规范的完善、砂尘试验箱的改进设计提出了建议和意见。同时文中也介绍了国外开式、闭式循环、可变循环等几种不同类型的砂尘试验箱作为参考,基于砂尘试验的破坏机理提出了砂尘试验箱的分类和选型建议。     

晚更新世长江中下游沙山和黄土物质来源研究

风成沉积物的产生、搬运和沉积过程是地球各圈层相互作用的产物。晚更新世末次冰期时,长江中下游广泛分布沙山和黄土,对于它们是远源搬运而来,还是近源堆积一直存有争议。对青山、九江、定山和红光这些典型沙山和黄土剖面进行碎屑锆石U-Pb年龄分析,获得346个新数据结果,将其与潜在物源区的碎屑锆石U-Pb年龄进行对比,结合这些地层的沉积时代和区域内已报道的物源示踪结果,发现在末次冰期青山沙山和九江黄土的碎屑锆石来自近源的江汉平原,定山沙山和红光黄土的碎屑锆石来自赣江。长江中下游沙山和黄土的发育属于河流搬运的碎屑物质被东亚冬季风吹拂和高大地形阻挡发生沉积的模式。     

GIS环境下大区域工程场地地震液化势的二维概率评价方法

用具有概率意义的饱和砂土抗液化强度经验公式来对大区域场地进行地震液化势二维概率评价;在GIS软件ArcGIS的支持下,将取样钻孔处的液化势评价结果等价于数字高程模型(Digital Elevation Model,DEM)中的高程,利用ArcGIS空间分析模块中的Kriging插值法估计大区域场地的地震液化范围。研究表明:将Kriging法应用于岩土工程地质特征的统计推断,有助于揭示勘探孔以外的地层信息,对于大区域场地地震液化范围的判别是一个较好的手段;利用ArcGIS空间分析模块中的Kriging法,通过已勘察点的信息(液化势)来估计未勘测点的土层液化势,能够较好地区划出场地地震液化势的空间分布特征。     

两种新型涂铁改性砂的过滤性能及反冲洗条件研究

以两种新型涂铁改性石英砂(纳米氧化铁改性砂,Nano-OCS;氧化铁改性砂,IOCS)及普通石英砂(RQS)为研究对象,考察了两种新型改性砂对沉后水腐殖酸及浊度的直接过滤效果,对其反冲洗条件进行优化研究,并对3种滤料的过滤效果进行了比较.结果表明,1滤层厚度为45 cm时,最佳滤速为6 m·h-1;3种滤料对腐殖酸和浊度的直接过滤效果依次为:Nano-OCSIOCSRQS,其中两种涂铁砂对腐殖酸的去除率分别为71.70%和61.61%;2Nano-OCS和IOCS滤柱的反冲洗流程分4步,对应的流程及最佳操作条件为:首先,用0.5 mol·L-1NaOH的溶液浸泡,气冲强度13 L·s-1·m-2,气冲时间6 min;然后,用0.075 mol·L-1的NaOH溶液与空气同时反冲洗,NaOH溶液冲洗强度为8 L·s-1·m-2,气冲强度13 L·s-1·m-2,冲洗时间3 min;接着用0.015 mol·L-1的FeCl3溶液与空气同时反冲洗,FeCl3溶液冲洗强度为8 L·s-1·m-2,气冲强度13L·s-1·m-2,冲洗时间2 min;最后,用清水冲洗,冲洗强度8 L·s-1·m-2,冲洗时间4 min.两种涂铁砂反冲洗前后表面形态结构更加复杂、粗糙度增加,对腐殖酸去除率进一步提高.3当滤层厚度由45 cm增加到80 cm时,Nano-OCS对腐殖酸直接过滤的最高去除率由74.6%提高至80.3%,平均去除率由57.9%提高至68.5%.