流域开发规划环境影响评价的战略意义——以岷江上游紫坪铺水库工程与都江堰保护问题为例

文章在分析岷江上游水电开发规划与流域环境问题的基础上提出对都江堰美学、经济、文化价值的再认识和对其进行保护的基本要求,讨论了紫坪铺水库工程与都江堰保护的战略抉择问题,并论述了流域开发规划环境影响评价的重要意义。     

SMT法插标分析沉积物中磷的地球化学形态

SMT法是一种较为通用的沉积物磷地球化学形态分析方法,但分析结果的准确性和重现性成为制约其进一步应用的关键.本研究以我国沉积物标准样品GSD-12为标样,在详细研究该标样的SMT法提取的磷的各个地球化学形态含量的基础上,提出了插标法控制沉积物中磷地球化学形态的准确性和可比性.在对比了手工分析,Skalar仪器分析及ICP-MS仪器分析的结果之后,针对SMT法操作中存在的问题进行了探讨,提出了操作过程中的注意事项,提出了GSD-12中总磷(TP)、无机磷(IP)、有机磷(OP)、盐酸提取磷(HCl-P)和氢氧化钠提取磷(NaOH-P)等含量分别为(156±5),(77±2),(39±3),(41±2),(42±2)mg/kg,并将该标样用于太湖沉积物中磷形态测定的质量控制,取得了较为满意的结果.     

移动通信技术发展对安全生产影响研究*

为了深入揭示安全生产水平同移动通信技术发展的内在联系,提出安全生产信息技术能力的概念及其监控管理连接、救援响应监测、定位导航追踪3方面子能力的定义,进而通过构建3方面子能力同移动通信主要性能指标之间的关系模型（SPITCMC）,并对其进行深入分析和研究。研究结果表明:SPITCMC模型可以准确诠释过去移动通信技术发展对安全生产水平产生的影响,同时可用于预判未来移动通信技术发展对安全生产可能产生的影响程度,从而为后续相关工作的开展提供参考和借鉴。     

电化学氢化物发生法处理含锑废水及对锑的回收

采用电化学氢化物发生法对模拟含锑废水进行处理,锑与水电解产生的氢形成氢化物从溶液中脱除,而后收集并加热分解锑化氢得到金属锑.实验表明,在酸性条件下对Sb(Ⅲ)去除效果较好,p H=4时去除率为76.1%.Sb(Ⅲ)与电解水产生的氢结合形成锑化氢从溶液中逸出是溶液中锑去除的最主要途径(回收率为66.2%),电沉积和吸附也对锑的去除做出少量贡献.Sb(Ⅴ)须预还原为Sb(Ⅲ)再氢化进行去除.试用了铅、石墨、钨这3种电解阴极材料,铅电极处理效果最佳.     

生物阴极型微生物燃料电池同步降解偶氮染料与产电性能研究

构建了生物阴极型微生物燃料电池(BCMFC),研究了以葡萄糖-偶氮染料(活性艳红X-3B)为共基质条件下,BCMFC产电性能及偶氮染料的降解特性.结果表明,电能的产生源于BCMFC对葡萄糖的降解,共代谢下活性艳红X-3B的(ABRX3B)的生物降解是主要的脱色机理.当葡萄糖初始浓度为500mg·L-1(以COD计),ABRX3B浓度低于300 mg·L-1时,功率密度维持50.7 mW·m-2,最终脱色率在94.4%以上,而ABRX3B浓度的进一步提高对BCMFC产电会产生抑制作用.阳极液的COD去除率和UV-Vis光谱表明,ABRX3B的降解过程中,有中间产物的积累.共基质条件下,BCMFC可成功实现同步电能输出和高效脱色.     

共基质下微生物燃料电池同步脱色甲基橙与产电性能

采用双室方形微生物燃料电池(MFC),以葡萄糖作为共基质,研究了共基质浓度对典型偶氮染料甲基橙在MFC阳极室中脱色效率及同步产电的影响。结果表明,在0~1.5 g/L浓度范围内,共基质浓度越大,甲基橙脱色率、COD去除率和最大输出电压越高。在共基质浓度为1.5 g/L,进水甲基橙为300 mg/L的条件下,8 h的脱色率高达95%,且在1 000 Ω外电阻下,最大输出电压达到662 mV;在无共基质条件下,8 h内对300 mg/L甲基橙的脱色率仅为7.5%,最大输出电压仅达到140 mV。厌氧对照实验表明,甲基橙在MFC中可以实现加速脱色,反应8 h后甲基橙在MFC中的脱色率提高了57%。该研究为开发新型MFC降解偶氮染料废水技术提供了理论依据。     

湿地植物-沉积物微生物燃料电池产电及河流底泥修复

以受污染的城市河涌底泥为底质,湿地植物选用风车草（Clinopodium Urticifolium）或短叶茳芏（Cyperus Malaccensis）,构建了湿地植物-沉积物微生物燃料电池（P-SMFC）及无植物的沉积物微生物燃料电池（SMFC）共3个电极处理组,研究了P-SMFC与SMFC的产电特性,并探讨了它们与对照组中底泥及上覆水中氮磷的迁移转化规律。结果表明,产电方面,在系统启动运行的7个月内,PSM1、SM和PSM2三个电极处理组均能维持较稳定的产电,输出电压在整个运行阶段总体稳定在0.30~0.50 V,且植物的引入提升了系统的产电性能。底泥修复方面,设置的5个处理组对底泥中有机质均有一定的降解作用,表现出PSM1、SM和PSM2处理组有机质的降解要显著高于PS1和PS2处理组,P-SMFC系统对底泥有机物的去除有显著的促进作用;系统中系统运行前2个月,2个P-SMFC处理组氨氮含量显著低于其他3个处理组,之后随着运行时间的延长,各处理组之间的变化差异性不大,5个处理组底泥中氨氮去除率均达到80%以上;电极的引入对底泥中硝氮的去除没有产生显著影响;各处理组底泥中总磷去除率不同,分别为PSM1处理组8.67%、SM处理组8.89%、PSM2处理组7.33%、PS1处理组12.45%、PS2处理组8.89%,产电过程抑制了磷的迁移,有助于底泥中磷的稳定。     

Grafting increases cadmium accumulation in the post-grafting generations of the potential cadmium-hyperaccumulator Solanum photeinocarpum

ABSTRACT

To determine whether grafting increases cadmium (Cd) accumulation in the post-grafting generation of hyperaccumulator plants, the effects of grafting on Cd accumulation characteristics of post-grafting generations of a potential Cd-hyperaccumulator Solanum photeinocarpum were evaluated in pot and field experiments. The following four grafting combinations were examined: ungrafted (UG), self-rooted grafting involving one S. photeinocarpum seedling (SG), self-rooted grafting involving two S. photeinocarpum seedling developmental stages (DG), and grafting on wild potato rootstock (PG). Grafting did not induce genetic changes in S. photeinocarpum, and increased the shoot biomass and the amount of Cd extracted by the shoots of the first, second, and third generations of S. photeinocarpum (PG > DG > SG > UG). Additionally, enhanced superoxide dismutase, peroxidase, and catalase activities and increased soluble protein contents of the first post-grafting generation were observed for the DG and PG, whereas only enhanced superoxide dismutase and peroxidase activities were observed for the SG. Grafting increased the DNA methylation levels by inducing hypermethylation in the first post-grafting generation (PG > DG > SG > UG). Therefore, grafting can enhance the Cd accumulation (phytoremediation) ability of post-grafting generations of S. photeinocarpum by enhancing DNA methylation levels, especially when wild potato rootstock is used.     

基于范例推理的灾害性地震应急物资需求预测研究

基于范例推理(CBR)理论,利用最近相邻法和粗糙集理论搜索相似度最高的主震历史范例,分析各主要物资需求量的影响因素,预测当前范例主震期应急物资需求量。通过序贯决策,采用马尔科夫预测模型预测余震类型,进而搜索余震历史范例,预测余震期应急物资需求量。以"玉树"地震为例,运用该方法估算地震发生后食物类、生活用品类、药品类、工程机械类的需求量。     

Electrochemical hydride generation of tin(II) and its determination by electrothermal atomic absorption spectrometry with in situ trapping in the graphite tube atomizer

An electrolytic hydride generation system for the determination of tin(II) by means of batch electrochemical hydride generation-electrothermal atomic absorption spectrometry (EcHG-ETAAS) with in situ trapping in a graphite tube atomizer is described. The effects of four permanent chemical modifiers – palladium, tungsten, iridium, and platinum – for graphite tube treatment on analyte absorbance and the effects of four cathode materials, i.e., Pb, Sn, Pb–Sn alloy, and glassy carbon, are checked. Three electrolytes, i.e., nitric acid, sulfuric acid, and hydrochloric acid, are examined as catholyte solutions. The influence of several parameters on EcHG is investigated using multivariate and univariate methods. Interferences of some concomitant ions are evaluated. The calibration curve is linear from 1 to 200?µg?L^?1, with a detection limit of 0.8?µg?L^?1 and a relative standard deviation of 6.2% (n?=?3) for 100?µg?L^?1 Sn(II). The proposed method was successfully applied in the analysis of real environmental water samples and reference materials, and good spiked recoveries over the range of 93.1–115% were obtained. The proposed technique provides a means for developing hydride generation of other elements.