Inverse modeling of multicomponent reactive transport through single and dual porosity media

Compacted bentonite is foreseen as buffer material for high-level radioactive waste in deep geological repositories because it provides hydraulic isolation, chemical stability, and radionuclide sorption. A wide range of laboratory tests were performed within the framework of FEBEX (Full-scale Engineered Barrier EXperiment) project to characterize buffer properties and develop numerical models for FEBEX bentonite. Here we present inverse single and dual-continuum multicomponent reactive transport models of a long-term permeation test performed on a 2.5 cm long sample of FEBEX bentonite. Initial saline bentonite porewater was flushed with 5.5 pore volumes of fresh granitic water. Water flux and chemical composition of effluent waters were monitored during almost 4 years. The model accounts for solute advection and diffusion and geochemical reactions such as aqueous complexation, acid-base, cation exchange, protonation/deprotonation by surface complexation and dissolution/precipitation of calcite, chalcedony and gypsum. All of these processes are assumed at local equilibrium. Similar to previous studies of bentonite porewater chemistry on batch systems which attest the relevance of protonation/deprotonation on buffering pH, our results confirm that protonation/deprotonation is a key process in maintaining a stable pH under dynamic transport conditions. Breakthrough curves of reactive species are more sensitive to initial porewater concentration than to effective diffusion coefficient. Optimum estimates of initial porewater chemistry of saturated compacted FEBEX bentonite are obtained by solving the inverse problem of multicomponent reactive transport. While the single-continuum model reproduces the trends of measured data for most chemical species, it fails to match properly the long tails of most breakthrough curves. Such limitation is overcome by resorting to a dual-continuum reactive transport model.     

Mixing-controlled biodegradation in a toluene plume--results from two-dimensional laboratory experiments

Various abiotic and biotic processes such as sorption, dilution, and degradation are known to affect the fate of organic contaminants, such as petroleum hydrocarbons in saturated porous media. Reactive transport modeling of such plumes indicates that the biodegradation of organic pollutants is, in many cases, controlled by mixing and therefore occurs locally at the plume's fringes, where electron donors and electron-acceptors mix. Herein, we aim to test whether this hypothesis can be verified by experimental results obtained from aerobic and anaerobic degradation experiments in two-dimensional sediment microcosms. Toluene was selected as a model compound for oxidizable contaminants. The two-dimensional microcosm was filled with quartz sand and operated under controlled flow conditions simulating a contaminant plume in otherwise uncontaminated groundwater. Aerobic degradation of toluene by Pseudomonas putida mt-2 reduced a continuous 8.7 mg L(-1) toluene concentration by 35% over a transport distance of 78 cm in 15.5 h. In comparison, under similar conditions Aromatoleum aromaticum strain EbN1 degraded 98% of the toluene infiltrated using nitrate (68.5+/-6.2 mg L(-1)) as electron acceptor. A major part of the biodegradation activity was located at the plume fringes and the slope of the electron-acceptor gradient was steeper during periods of active biodegradation. The distribution of toluene and the significant overlap of nitrate at the plume's fringe indicate that biokinetic and/or microscale transport processes may constitute additional limiting factors. Experimental data is corroborated with results from a reactive transport model using double Monod kinetics. The outcome of the study shows that in order to simulate degradation in contaminant plumes, detailed data sets are required to test the applicability of models. These will have to deal with the incorporation of existing parameters coding for substrate conversion kinetics and microbial growth.     

面向作物病害识别的高光谱波谱库设计与开发

自20世纪70年代以来,国内外波谱数据库发展迅速,但都存在着针对性不强的缺陷,不能满足我国现阶段遥感应用的需要。该文通过以小麦条锈病为案例的高光谱波谱库的设计与开发,实现了波谱查询、影像管理、用户管理、数据管理、反演模型等功能,可供其它面向病害识别的高光谱波谱库的建立参考。     

木根麦冬的种群数量动态

运用静态生命表、生殖力表和Leslie矩阵模型,研究了木根麦冬种群数量动态过程,揭示了种群各龄级植株的动态规律,结果表明,木根麦冬种群为衰退型种群,种群的净增殖率、内禀增长率和周限增长率较低,种群世代周期偏长,种群不能自我更新,在20a内种群幼苗数量和总数量将持续快速下降,木根麦冬种群在16-20a年龄段受到了环境筛的强烈过滤作用。     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

区域红壤资源信息系统的建立

将GIS技术与数学模型相结合,探讨区域红壤资源信息系统的建立与应用.在明确红壤资源信息系统研制的目的、任务与基本原则的基础上,进行系统的总体设计.划分系统的模块和确定系统的各个组成部分,并确定系统的软硬件配置、设计系统界面.建立空间数据库及多种分析与应用模型.     

同一孕震模式中不同的水位变化形态

基于应力场与含水层井水位的关系 ,以DD模式为例 ,用数值模拟的方法讨论了同一孕震模式下不同地点的井水位变化。研究表明 ,同一孕震模式下水位存在不同的前兆现象 ,这些前兆现象水位变化形态与观测井相对于孕震区的不同位置有密切关系。本文同时给出了DD模式下不同地点的水位前兆变化特征     

基于3种时间序列模型的九龙江河流库区藻华预测

湖库富营养化和有害藻华是全球性生态环境问题,藻华预测与早期预警是保障湖库水源地供水安全的关键技术.如何基于高频水生态在线监测数据进行藻华的实时动态预测成为水生态管理领域的重大需求.本研究以福建省九龙江江东库区(水源地)为例,利用3年连续观测的逐时平均总叶绿素a浓度数据,对比研究了SARIMA、Prophet和LSTM(长短期记忆神经网络)3种时间序列模型在藻华(日平均叶绿素a大于15μg·L^-1)预测方面的效果.结果表明：(1)时间序列模型要求参数少,灵活性强,能清晰反映水质特征和未来变化趋势,可弥补传统藻类监测预警方法的局限性;(2)基于深度学习框架的LSTM模型,具有独特的迭代优化算法,对藻类非线性变化特征的识别和预测能力较强,其总叶绿素a逐日预测和7日预测效果均显著优于SARIMA模型和Prophet模型;(3)输入数据长度会在一定程度上影响模型预测效果,最优的输入数据时间长度为7 d;输入数据频率对预测效果也有影响,在预测非藻华日时,小时数据的预测效果优于日频率数据;在预测藻华日时,两种频率数据无显著差异,但日频率数据能更准确识别藻华日特征.总结起来,基于...     

市级国土空间规划核心指标纵向传导研究——以湖南省常德市为例

核心指标纵向层级传导作为市级国土空间规划的关键内容,对市域国土空间格局优化及规划统筹具有重要意义。针对当前指标传导研究不充分、不精细等问题,遵循“核心传导指标选择→指标传导技术逻辑构建→情景模拟预测”的研究思路,以常德市为例研究其2035年国土空间规划“市→县（区）”的核心指标传导。结果表明：（1）基于“指标全域总量预测—指标空间布局模拟—指标分区分类传导”的传导技术逻辑,通过SD与GeoSOS-FLUS模型的耦合集成利用,可有效实现市级国土空间规划核心指标“自上而下”与“自下而上”相结合的科学传导。（2）构建“人—地—业”协调的常德市国土空间利用SD模型,预测获得2035年市域核心指标总量,相应国土利用综合效益达12994.25亿元,相比2018年提升207.75%。（3）从指标传导结果来看,2035年常德市各县（市、区）社会经济类指标除常住人口规模指标外均保持增长趋势,边界类指标实现“只增不减”,用地类指标变化各异,但总体契合常德市主体功能区建设方向,核心指标传导结果符合实际。     

街道峡谷内车辆流动对反应性污染物传播特性影响的模拟研究

采用CFD（计算流体力学）数值模拟的研究方法,使用动网格技术,分析简单光化学反应下车辆流动及不同来流风速对双车道三维街道峡谷内污染物传播特性的影响.结果表明,车辆移动改变了峡谷内气流结构,以及背风侧与迎风侧活性污染物浓度分布的相对大小,有利于污染物在峡谷中的传播扩散;来流风使机动车尾气向建筑背风侧汇聚,并随着风速增加而加强,对近迎风侧车道车辆尾气淹没射流的影响比近背风侧车道大.在车辆移动与来流风的综合作用下,污染物的扩散能力得到显著增强.