粗粒子气溶胶远距离输送造成华南严重空气污染的分析

2009年4月末,发生了一次罕见的粗粒子气溶胶远距离输送造成华南地区出现严重的空气污染事件,其特征主要是气溶胶质量浓度超标,而能见度没有明显恶化,对这次空气污染事件进行分析的结果表明.在过程中,粗细粒子质量比(PM2.5/PM10)有明显的3次下降,最低达到0.3,即PM2.5仅占PM10的30%,这与珠江三角洲地区通常以细粒子为主的污染特征有很大不同,反映了外来粗粒子的侵入特征.长江流域浮尘天气的沙尘粒子变性后,长距离输送污染物叠加本地污染物,造成这次严重空气污染事件.     

腐殖酸及酸雨对贫铀在土壤中迁移的影响研究

 利用经过完善的贫铀迁移模型,研究腐殖酸(HA)及酸雨对贫铀在土壤中迁移的影响.结果表明,对照组(北京地区土壤)DU迁移到达9~11cm,分别添加2%、5%、10%HA的实验组DU迁移依次降低,分别为21~23cm、15~17cm、11~13cm,说明腐殖酸促进了DU迁移; pH值为4.0和3.0的模拟酸雨,分别使贫铀迁移至29~31cm及35cm以上,说明酸雨促进了贫铀迁移;在酸雨和腐殖酸综合作用下贫铀迁移仅到5~7cm,说明腐殖酸和酸雨综合作用抑制了贫铀迁移.     

Efficacy of natural biocide on control of microbial induced corrosion in oil pipelines mediated by Desulfovibrio vulgaris and Desulfovibrio gigas

We compared the efficacy of a natural biocide with four chemical tetrakishydroxymethyl phosphonium sulfonate, benzyl trimethyl ammonium chloride, and formaldehyde, glutaraldehyde, to control microbial induced corrosion in oil pipelines. The efficacy of biocides were monitored against Desulfovibrio vulgaris and Desulfovibrio gigas in experimental pipes by measuring cell counts, H2S production, Fe(II) production, production of extracellular polymeric substances and structure of biofilm. The treatment with cow urine had minimum planktonic cell counts of 3 102 CFU/mL as well as biofilm cell counts of 9 101 CFU/mL as compared with tetrakishydroxyl methyl phosphonium sulfonate, benzyl trimethyl ammonium chloride, formaldehyde and glutaraldehyde. Sulfide production was the lowest with cow urine (0.08 mmol/L), followed by tetrakishydroxymethyl phosphonium sulfonate 0.72 mmol/L. On day 90 of treatment, Fe(II) production was also found to be the lowest with cow urine. The scanning electron microscopic studies indicated that the biofilm bacteria were killed by cow urine. These results demonstrate the cow urine mediated control of microbially induced corrosion, and this is indicative of its potential as a viable substitute of toxic biocides. To the best of our knowledge, this seems to be the first report which screens possible biocidal activity by cow urine as compared to the most common biocides which oil industry is currently using.     

响应面法优化复合微生物吸附剂对低浓度Cr3+的吸附

根据已有4种微生物吸附剂的吸附基团存在的差异特征,将其复配成复合吸附剂,借助统计学方法研究其对低ρ(Cr3+)废水的吸附性能.在单因素试验基础上,利用P-B(Plackett-Burman)法筛选出吸附过程4个主要影响因素分别为pH,初始ρ(Cr3+)及微生物吸附剂XB和TQ的投加量,应用最陡爬坡试验接近主要因素最优水平,采用Box-Behnken试验设计和响应面分析得到对低浓度Cr3+吸附过程的二阶模型.结果表明,最优吸附条件为pH 4.0,初始ρ(Cr3+)为4.86mg/L,XB和TQ的投加量分别为0.20和0.13 g/L,实际吸附率达到87.54%,与理论预测值(87.68%)接近,且高出单一吸附剂吸附率7.79%～17.35%.FT-IR扫描显示,复合微生物吸附剂性能提高与表面基团增多有关.通过响应面分析法优化复合微生物吸附,吸附性能明显提高.     

高架道路交通噪声动态模拟

为研究高架道路噪声的分布规律,结合微观交通仿真、车辆噪声排放和传播原理,对高架道路交通噪声进行动态模拟.该方法能得到逐秒变化的实时声压级.能反映交通噪声随时间的动态变化,且方便应用多项指标评估.研究表明:等效声级和累计声级的误差达到±2 dB;高架道路两端的防撞护栏在离道路边缘32m的垂直面上的声压衰减影响到10m左右...     

琉基纤维素对水中Cr(VI)离子的吸附研究

制备了巯基纤维素并用其对含Cr(VI)离子的溶液进行了静态吸附实验.研究了pH值、吸附时间、反应温度、吸附剂用量等因素对吸附性能的影响.结果表明:在pH值为2、Cr(VI)浓度为50 mg/L和吸附剂为0.5 g时,常温条件下吸附6h后,Cr(VI)去除率达到99.2%,吸附反应符合Langmuir和Freundlic...     

苯酚对活性污泥活性及微型动物群落结构的影响

为了探究苯酚对污泥活性及微型动物群落结构的影响,以SBR工艺的活性污泥为研究对象,分析苯酚对污泥TTC-ETS活性、INT-ETS活性和微型动物群落结构及其动态变化的影响.结果表明,污泥TTC-ETS活性较之INT-ETS活性能够更有效表征有机毒害物质苯酚对污泥活性的影响,且随着进水苯酚浓度的增大,苯酚对污泥活性的抑制越明显:进水浓度在50mg·L-1时,苯酚对污泥活性的抑制率为(20.75±10.43)%.进水苯酚浓度为100 mg·L-1时,抑制率为(39.73±26.92)%,且波动较大.在300 mg·L-1进水运行后期,苯酚对污泥活性的抑制率稳定在40%左右;苯酚对活性污泥微型动物群落结构的影响随浓度的增大而增大,且对不同微型动物类群影响不同:在低浓度苯酚进水条件下,只有单个微型动物类群(有壳变形虫)受到明显的抑制,而当浓度增大至100 mg·L-1和300 mg·L-1时,对多个微型动物类群(固着型纤毛虫、有壳变形虫、匍匐型纤毛虫、肉食性纤毛虫等)产生抑制,对少数类群(鞭毛虫、线虫等)产生促进作用;苯酚影响下的污泥活性与微型动物之间存在一定的关联性,针棘匣壳虫(Centropyxis aculeata)、多变斜板虫(Plagiocampa mutabilis)等可作为含酚废水处理过程中污泥活性低的指示生物,湖累枝虫(Epistylis lacustris)、软波豆虫(Bodo lens)、跳侧滴虫(Pleuromonas jaculans)等可作为污泥活性高的指示生物.     

2-丁烯醛生产废水中溶解性有机物的分级解析

采用超滤膜法将2-丁烯醛生产废水中的有机物分为相对分子质量不同的7个级分,并应用溶解性有机碳(dissolved organic carbon,DOC)、紫外吸收光谱(ultraviolet spectrum,UV)、傅里叶变换红外光谱(fourier transform infrared spectrometer,FT-IR)和气相色谱/质谱联用仪(gas chromatography with mass spectrometry,GC-MS)技术对不同相对分子质量区间的有机物所占比例及物质结构进行了研究.结果表明,废水中相对分子质量1×103的有机物所占比例最高,达到88.57%;采用GCMS对废水中相对分子质量1×103的级分进行分析,定性出27种化合物,包含醛、酮、酯、醇、酚、酸、烷烃类及其他苯系物等,其峰面积占有机物峰面积总和的比例分别为6.9%、5.3%、35.4%、13.2%、4.6%、0.4%、1.7%、16.8%,总和为84%.UV和FT-IR分析结果均显示不同相对分子质量区间的光谱吸收特征没有明显差别,级分中存在含有不饱和双键、羟基、羰基化合物及芳香族化合物,与GC-MS检测结果相吻合.研究结果为废水处理工艺的开发与优化提供了重要的指导作用.     

Primary neuronal-astrocytic co-culture platform for neurotoxicity assessment of di-(2-ethylhexyl) phthalate

Plastics such as polyvinyl chlorides （PVC） are widely used in many indoor constructed environments; however, their unbound chemicals, such as di-（2-ethylhexyl） phthalates （DEHP）, can leach into the surrounding environment. This study focused on DEHP＇s effect on the central nervous system by determining the precise DEHP content in mice brain tissue after exposure to the chemical, to evaluate the specific exposure range. Primary neuronal-astrocyte co-culture systems were used as in vitro models for chemical hazard identification of DEHP. Oxidative stress was hypothesized as a probable mechanism involved, and therefore the total reactive oxygen species （ROS） concentration was determined as a biomarker of oxidative stress. In addition, NeuriteTracer, a neurite tracing plugin with ImageJ, was used to develop an assay for neurotoxicity to provide quantitative measurements of neurological parameters, such as neuronal number, neuron count and neurite length, all of which could indicate neurotoxic effects. The results showed that with 1 nmol/L DEHP exposure, there was a significant increase in ROS concentrations, indicating that the neuronal-astrocyte cultures were injured due to exposure to DEHP. In response, astrocyte proliferation （gliosis） was initiated, serving as a mechanism to maintain a homeostatic environment for neurons and protect neurons from toxic chemicals. There is a need to assess the cumulative effects of DEHP in animals to evaluate the possible uotake and effects on the human neuronal system from exoosure to DEHP in the indoor environment.     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.