基于GIS组件的环境影响评价地图系统

论述了利用GIS组件开发环境影响评价专题地图应用软件的优点 ,对系统的总体构思及功能进行了详细的说明 ,设计了环境地理信息系统处理模块的软件界面 ,实现了GIS的基本功能 ;对于处理完成的专题地图 ,建立图片数据库应用软件进行保存 ,并通过数据库实现地图库中图片的删除、浏览及打印等功能。本应用软件可广泛应用于环境影响评价领域 ,并对深层次的GIS软件开发具有一定的借鉴作用     

Rubber tire life cycle assessment and the effect of reducing carbon footprint by replacing carbon black with graphene

This research utilizes real operating data from a tire plant operating in Central Taiwan to investigate the carbon footprint emissions (CO₂e) involved in producing the electric bicycle. The simulation results are based on the PAS 2050 standard using the SimaPro 7.3 software tool. Our results show the total carbon footprint emissions of 1.2-kg tire for the electric bicycle weighing 4.53-kg CO₂e, composed of 2.63-kg CO₂e from raw tire materials stage, 1.295-kg CO₂e from tire manufacturing stage, and 0.605-kg CO₂e from tire transport stage. An international certified organization, British Standard Institute (BSI), verified the accuracy of our results as 98.7%. We found that carbon emissions at the raw materials stage were higher than that for the other two stages – manufacturing and transportation. Carbon black was determined as the maximum source of carbon emissions at the raw material stage. To reduce the tire plant carbon emissions, this paper recommends using graphene to replace carbon black. Graphene has been reported by many researches to improve the properties of rubber products. From our simulation results, the carbon footprint emissions of 4.56-kg CO₂e of the origin tire plant uses 0.456-kg carbon black to produce 1.2-kg electric bicycle tires. This can be reduced to 4.29 (5.92%), 4.03 (11.62%), 3.75 (11.76%), and 3.49-kg CO₂e (23.46%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. If we focus only on 0.456-kg carbon black producing 1.08-kg CO₂e, the reduced carbon footprint will be 0.812 (24.81%), 0.547 (49.35%), 0.28 (74.07%), and 0.0128-kg CO₂e (98.81%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. From our analysis, graphene replacing carbon black can reduce carbon footprint. This has not been published previously and provides a direction for the tire plant to save carbon emissions.     

U（Ⅵ）在处置场地质环境中迁移规律的模拟研究

以西南某极低放射性废物处置场土壤为研究对象,采用静态吸附和动态吸附实验获取处置场地质特征参数,结合PHREEQC软件和地下水数值模拟系统（GMS）预测U（Ⅵ）在处置场环境中的化学种态和迁移规律。结果表明：U（Ⅵ）在处置场土壤中的吸附平衡时间为20 d,吸附分配系数为358 mL/g;U（Ⅵ）在处置场地下水环境中主要以UO₂（CO₃）₂^2-和UO₂（CO₃）₃^4-形式存在;处置场关闭后安全运行30 a,处置场中心U（Ⅵ）质量浓度下降4.20%,外围50 m与下游河流边界处U（Ⅵ）质量浓度分别为初始给定值的3.40%和1.32%;在12 a时有0.10%的U（Ⅵ）到达河边。     

Surfer软件和AutoCAD在污染场地调查及风险评估中的应用

在场地调查和风险评估报告中需要描述污染物分布和确定土壤修复区域和范围,目前对此无统一的技术要求,不同案例使用的技术方法不同。今提出将 Surfer软件和 AutoCAD结合使用生成等值线图件,以及据此确定污染土壤修复范围的方法,并基于某搬迁化工厂初步土壤调查及风险评估的案例介绍了操作步骤。旨在介绍2个专业软件联用的新功能的开发和使用技巧,为编制场地调查和风险评估报告提供一种便捷、易操作的工作方法。     

大气扩散模式预测计算软件的开发

结合Microsoft Visual Basic(VB)语言的编程特点,探讨了大气环境影响评价计算机软件系统的理论基础、设计思想和应用程序编制的实现方法,编制了专门处理大气扩散模式浓度计算的应用程序,避免了大量繁杂的手工计算工作,使计算快速、准确,提高了环境影响评价工作的质量.     

CNG加气站事故后果分析方法研究

根据CNG加气站系统运行的实际情况,将CNG加气站中易发生泄漏的设备分为管道阀门、挠性连接器、压缩机、储气设备、放散管5类。建立了CNG泄漏的事件树,将CNG加气站的事故后果类型概括为喷射火、闪火、蒸气云爆炸。总结了CNG加气站事故后果的计算模型,采用美国环保局的ALOHA软件确定事故后果的影响范围。综合运用该两种方法对喷射火和蒸气云爆炸的事故案例进行对比研究,结果表明,计算结果基本一致。该两种事故后果分析方法为CNG加气站安全管理和安全规划提供依据。     

软件滤波在土体自振柱试验中的应用

自振柱试验是测量土样动剪切模量和阻尼比的常用方法,但由于噪声等环境因素的影响,土样扭剪自由振动的衰减波曲线有时会因高频干扰出现不平滑现象,难以得到合理的测试结果。软件数字滤波是解决这类问题的有效方法。本文通过多种软件数字滤波方法优缺点的对比,认为平均滤波法和惯性滤波法能有效解决试验数据中的高频干扰问题,并分别选择适当的滤波参数,得到了平滑的自振衰减波曲线;最后,采用平均滤波法处理了两组自振柱试验数据。结果表明,软件滤波法确能有效消除不合理数据,得到符合一般规律的土体动剪切模量和阻尼比试验结果,从而验证了其在土体自振柱试验中的应用价值。     

火力发电厂水量平衡管理软件的设计

针对火力发电厂水务管理的现状,从科学管理的角度提出了火力发电厂的水量平衡软件。电厂水系统数据通过运算中心处理,可短时间内得出计算结果,生成动态水平衡图,实现了火电厂水系统程序化、系统化管理,为火电厂节水、减排提供了可靠的保证。     

扬州市城区内河优化换水方案研究

通过分析扬州市城区内河各河段的流量关系和水质关系,建立城区内河水系优化换水数学模型,合理分配各内河的换水量,使得各内河出水口水质有所改善且相当,实现扬州市城区内河换水方案的优化.开发的开放性可视化优化换水软件,方便用户随时更新河道参数和水质参数,计算不同情况下的换水方案.     

Development and Application of Software Tools for Monitoring, Assessment and Reporting of Data Concerning the Operation of Urban Wastewater Treatment Plants in Cyprus

This work focuses on the development and application of appropriate software tools for recording, assessing and reporting data related to the operation of the Urban Wastewater Treatment Plants (UWTPs) in Cyprus. An appropriate Internet-Based Management System was designed, developed and installed at the premises of the UWTPs and of the Cypriot Competent Authority (Water Development Department — WDD) in order to coordinate and disseminate tasks and related information for monitoring the operation of UWTPs. In addition, a client Geographical Information System database was compiled to be used for obtaining and analyzing spatial information. The software tools are based on common procedures and state-of-the-art technology for the recording and transmission of data and information and they provide an integrated view related to the operation and the efficiency of wastewater treatment systems. Moreover, continuous control and systematic monitoring of the UWTPs by the operators as well as continuous and direct supervision of the UWTPs environmental performance is achieved by the personnel of the Competent Authority. Furthermore, direct and unobstructed provision of data to the Competent Authority of Cyprus is accomplished by the operators of the UWTPs, while the Competent Authority is supported to compose full and representative reports to the European Commission and other International Organizations. The developed tools enable the direct recording of data obtained through measurements and analyses, permit the comparison of data with existing legislation and provide an integrated picture of the operation of the wastewater treatment plants as well as the option to focus and assess each individual treatment stage.