构树修复对重金属污染土壤环境质量的影响

通过温室盆栽试验,研究构树（Broussonetia papyrifera）生长对重金属污染土壤酶活性和微生物群落结构的影响.结果表明,构树修复污染土壤中酶活性和微生物多样性明显提高.经270d培养后,构树生长土壤中蔗糖酶和酸性磷酸酶活性与种植土壤相比分别显著（P<0.05）提高3.12倍和2.29倍;土壤脱氢酶与有效态As、Cd、Pb、Zn和Cu含量,蔗糖酶与有效态Cd含量,以及磷酸酶与有效态Cd和Cu含量之间呈显著负相关（P<0.05）.根据16S和18S rDNA PCR-DGGE分析表明,构树修复可提高污染土壤中细菌和丛枝菌根真菌多样性.上述结果表明,构树修复可有效改善重金属污染土壤的环境质量.然而,污染土壤中重金属有效态含量下降不明显,必须辅助物理和化学措施来强化构树对重金属污染土壤的生态修复潜力.     

牛粪-化肥配施对水稻田氮磷迁移转化的影响

在控制外源N输入量相同的前提下,通过田间小区实验,探讨有机肥与化肥不同施用量（牛粪施用量：5,10,20t/hm²）对稻田田间土-水界面氮磷迁移转化特征的影响.结果表明：控制稻田水中NH₄⁺-N、NO₃^--N、TN和TP输出的最佳时期分别为施肥后的第5,30,7,20d,且TN和TP浓度随时间变化符合单指数衰减方程（0.7444≤R²≤0.9724;1.1×10^-6≤F≤0.0055）.采用牛粪部分代替化肥的施肥方式,在一定范围内能降低稻田退水中TN、TP输出负荷（41.8%、36.0%、64.3%;20.3%、39.1%、48.9%）,还可以降低稻田水中N/P,降低水体富营养化风险.同时,牛粪的施用可提高土壤中脲酶和磷酸酶的含量,促进氮磷向植物可吸收形态转化.综合经济成本和生态效益核算,采用10t有机肥代替无机肥的处理是相对经济环保的施肥方法,该施肥方式下,氮磷年输出负荷分别为17.70,1.26kg/hm².     

Seasonal variation and size distribution of biogenic secondary organic aerosols at urban and continental background sites of China

Size-resolved biogenic secondary organic aerosols(BSOA) derived from isoprene and monoterpene photooxidation in Qinghai Lake, Tibetan Plateau(a continental background site) and five cities of China were measured using gas chromatography/mass spectrometry(GC/MS). Concentrations of the determined BSOA are higher in the cities than in the background and are also higher in summer than in winter. Moreover, strong positive correlations(R2= 0.44–0.90) between BSOA and sulfate were found at the six sites,suggesting that anthropogenic pollution(i.e., sulfate) could enhance SOA formation,because sulfate provides a surface favorable for acid-catalyzed formation of BSOA. Size distribution measurements showed that most of the determined SOA tracers are enriched in the fine mode( 3.3 μm) except for cis-pinic and cis-pinonic acids, both presented a comparable mass in the fine and coarse( 3.3 μm) modes, respectively. Mass ratio of oxidation products derived from isoprene to those from monoterpene in the five urban regions during summer are much less than those in Qinghai Lake region. In addition, in the five urban regions relative abundances of monoterpene oxidation products to SOA are much higher than those of isoprene. Such phenomena suggest that BSOA derived from monoterpenes are more abundant than those from isoprene in Chinese urban areas.     

海洋环境低水位加速腐蚀研究进展

以海洋环境中一个非常重要的局部腐蚀形式——低水位加速腐蚀(ALWC)为对象,自其检测、发生原因、防护三个方面就国内外的文献报告进行综述分析。在检测方面,首先介绍了常用的宏观观察这一被动形式,并突出其特征,然后介绍了利用海水中可溶性无机氮含量作为ALWC发生概率预测这一主动形式,分析其优势与不足。在发生原因方面,在对将ALWC认定为一种典型的微生物腐蚀(MIC)形式的认知过程进行介绍之后,重点分析了微生物对ALWC作用机制不清晰的原因,并建议在后续研究中突出动态演变过程,结合高通量测序等分子生物学技术,确定在不同的阶段影响ALWC的关键微生物,且进一步在大气-海水体系下研究典型菌株及其协同作用的影响,提出微生物对ALWC的作用机制。在防护方面,根据新建和已建钢结构设施分别对传统和针对ALWC所具有的MIC与局部腐蚀特性的新型高效防护方法进行了介绍,并分析了防护方法的优缺点。     

兰州地区大气臭氧时空变化及影响因素研究

本文采用OMI臭氧遥感数据,结合甲醛垂直柱浓度、气象数据以及经济数据,分析了2005~2015年兰州地区臭氧柱浓度时空变化格局,并探索了影响臭氧的新气象因子,总结达到臭氧污染的日照、气压等气象条件,确定影响臭氧柱浓度的主要人为源并确定其限域。结果表明:1)2005~2015年夏季柱浓度值最高,冬季、秋季次之,春季最低;夏季波动幅度最大,其余三季波动幅度较小且平稳。2)11年中,臭氧柱浓度具有较大的波动。2005年至2010年快速增长到最高值331.997 DU。2010年之后,臭氧柱浓度缓慢下降,2014年起有回升趋势。3)OMI遥感数据具有较高的可靠性,并根据AQI的线性关系划分了臭氧柱浓度的污染等级。结果指示了11年大气臭氧空间变化,2005~2009年5年间研究区全区空气质量一直处于良,2010年全区轻度污染,后两年污染逐渐减弱,2013~2015年全区恢复至良。4)根据兰州发展的趋势以及周边城市的关系,划分了兰州经济圈及功能区,并结合臭氧柱浓度空间分布图得出臭氧污染与经济特征的密切关系。5)正弦模型拟合后臭氧柱浓度变化趋势呈不明显的周期性,说明臭氧的人为来源贡献较大。6)创新探索影响臭氧污染的新气象因子(日照、气压等参数),并确定其重要人为源限域。     

污染物在地下水毛细饱水带的运移规律浅释

分析了毛细饱水带的水动力学特性，指出在地下水污染研究中，污染物在毛细饱和水带和潜水怪具有相同的水平运动规律，并以实例分析说明该带对污染物运移的重要性。建议在研究和一非饱和条件地下水及污染物运动问题时把毛细饱水带与潜水含水层统一为饱马毛细饱水带顶面作为饱水面。     

Laboratory and Field Assessment of Arsenic Testing Field Kits in Bangladesh and West Bengal, India

High concentrations of arsenic in ground waters in West Bengal and Bangladeshhave become a major cause for concern in recent years. Given the enormity and the severity of the problemof arsenic poisoning, a task of evaluating the commercially available arsenic detection field kits for their capabilities was undertaken. In the light of the findings, generic specificationswere recommended which could form the basis forindigenous manufacture of these kits in the arsenic affected countries. This article presents the results of the laboratory and fieldevaluation conducted in Bangladesh and West Bengalof five arsenic testing field kits. The salient features of the kits, their merits and limitationshave been brought out. Based on the criteria of kitdesign, quality of chemicals used, colourcomparator charts, detection range, time required for analysis, cost etc., a comparative ranking ofthe kits has been made to facilitate the choice of the kit to meet specific requirements.     

Monitoring Air Quality in Mountains: Designing an Effective Network

A quantitatively robust yet parsimonious air-quality monitoring network in mountainous regions requires special attention to relevant spatial and temporal scales of measurement and inference. The design of monitoring networks should focus on the objectives required by public agencies, namely: 1) determine if some threshold has been exceeded (e.g., for regulatory purposes), and 2) identify spatial patterns and temporal trends (e.g., to protect natural resources). A short-term, multi-scale assessment to quantify spatial variability in air quality is a valuable asset in designing a network, in conjunction with an evaluation of existing data and simulation-model output. A recent assessment in Washington state (USA) quantified spatial variability in tropospheric ozone distribution ranging from a single watershed to the western third of the state. Spatial and temporal coherence in ozone exposure modified by predictable elevational relationships ( 1.3 ppbv ozone per 100 m elevation gain) extends from urban areas to the crest of the Cascade Range. This suggests that a sparse network of permanent analyzers is sufficient at all spatial scales, with the option of periodic intensive measurements to validate network design. It is imperative that agencies cooperate in the design of monitoring networks in mountainous regions to optimize data collection and financial efficiencies.     

Cumulative impact assessment in environmental planning: A coastal wetland watershed example

Several theoretical, analytical, and institutional difficulties have impeded the development and application of the assessment of cumulative environmental impacts. Watershed development on coastal wetlands offers an ideal context for evaluating the land disturbance target approach to cumulative impact assessment. A model land use planning system involving a time series approach was developed for Elkhorn Slough in California. The approach included four major components: evaluation of erosion susceptibility, measurement of land disturbance, establishment of a land disturbance target, and a comparison of existing and target land disturbance values. Further research is needed to test the transferability of the approach in a wide range of coastal watersheds and to verify the applicability of the methods to other cumulative impact problems.     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.