铝电解槽废旧阴极炭块的处理

实验研究了铝电解工业的废渣——废旧阴极炭块的浮选处理。考查了浮选条件,以及不同捕收剂的浮选结果。     

电解法降解化学镀镍废液COD的研究

采用电解法处理化学镀镍废液,考察了pH值、电流密度、温度、循环、电解时间等因素对镍离子回收率和COD去除率的影响,并重点研究了电解参数对化学镀镍废液中不同物质的COD降解效果的影响。结果表明,酸性条件有利于COD的降解,碱性条件有利于化学镀镍废液中镍的回收,当镍的回收率达到98.7%时,COD的去除率可达61.91%。     

Agricultural intensification within agroforestry: The case of coffee and wood products

Compared to the environmental and conservation value as refuges for biodiversity, less is known about the social and economic value of shaded coffee systems. The agroforestry system can serve as a source of non-coffee products for diverse purposes. This study focuses on the role of shade trees in smallholder coffee farms, examining the wood products derived from the shaded coffee system. Data presented from surveys with 185 growers in Peru and 153 growers in Guatemala show that the consumption and sale of all non-coffee products account for a fifth to a third of the total value realized from the agroforestry system. Fuelwood and construction materials account for much of this value. Differences seen between countries can be traced to agricultural intensification – the degree to which the coffee agroforestry system is “technified” (i.e., managed with a reduced shade tree cover and diversity, high-yielding cultivars, agrochemical inputs, etc.) – as well as the relative demand for wood resources and farmers’ access to natural forest systems.     

废无汞碱性电池极性材料制备锰锌铁氧体磁性纳米颗粒

以硝酸浸取废无汞碱性电池极性材料,再加入硝酸铁及蔗糖生成前驱体,最后通过焙烧制得锰锌铁氧体磁性纳米颗粒。优化了酸浸和焙烧条件,采用FTIR和DTA-TG技术研究了前驱体的形成和热解过程,采用XRD、FTIR、TEM技术和振动样品磁强计对锰锌铁氧体进行了表征。结果表明:废无汞碱性电池极性材料酸浸的最佳条件为H_2O_2加入量3%(w)、液固比10 mL/g、稀硝酸浓度4 mol/L、浸取温度40℃,该条件下浸取10 min锰和锌的浸出率均可达100%;所得前驱体为葡萄糖酸盐,其最佳焙烧条件为焙烧温度450℃、焙烧时间2 h;最佳条件下所得锰锌铁氧体为尖晶石型Mn_(0.5)Zn_(0.5)Fe_2O_4,其颗粒为球形、大小均匀,且磁性能优良。     

微波焙烧法与马弗炉焙烧法处理废脱硝催化剂的效果比较

用Na_2CO_3作为助溶剂、Na_2O_2作为消解剂,采用微波焙烧法和马弗炉焙烧法消解处理废钒钨钛脱硝催化剂。通过XRF、BET、XRD和NH_3-TPD技术对两种消解方法制得的钛钨粉样品进行了表征。表征结果显示,与马弗炉焙烧法相比,微波焙烧法得到的钛钨粉纯度更高,TiO_2与WO_3含量之和大于96.7%(w),且该钛钨粉还具有更高的比表面积和酸性,可以作为钒钨钛脱硝催化剂的生产原料再利用。     

Development of functional composts using spent coffee grounds,poultry manure and biochar through microbial bioaugmentation

Spent coffee grounds (SCG), poultry manure, and agricultural waste-derived biochar were used to manufacture functional composts through microbial bioaugmentation. The highest yield of tomato stalk-based biochar (40.7%) was obtained at 450°C with a surface area of 2.35 m² g^?1. Four pilot-scale composting reactors were established to perform composting for 45 days. The ratios of NH₄⁺–N/NO₃^?–N, which served as an indicator of compost maturity, indicate rapid, and successful composting via microbial bioaugmentation and biochar amendment. Moreover, germination indices for radish also increased by 14–34% through augmentation and biochar amendment. Microbial diversity was also enhanced in the augmented and biochar-amended composts by 7.1–8.9%, where two species of Sphingobacteriaceae were dominant (29–43%). The scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH) were enhanced by 14.1% and 8.6% in the fruits of pepper plants grown in the presence of the TR-2 (augmentation applied only) and TR-3 (both augmentation and biochar amendment applied) composts, respectively. Total phenolic content was also enhanced by 68% in the fruits of the crops grown in TR-3. Moreover, the other compost, TR-L (augmentation applied only), boosted DPPH scavenging activity by 111% in leeks compared with commercial organic fertilizer, while TR-3 increased the phenolic content by 44.8%. Composting facilitated by microbial augmentation and biochar amendment shortened the composting time and enhanced the quality of the functional compost. These results indicate that functional compost has great potential to compete with commercially available organic fertilizers and that the novel composting technology could significantly contribute to the eco-friendly recycling of organic wastes such as spent coffee grounds, poultry manure, and agricultural wastes.     

Removal of 2, 4‐D from aqueous solution by the adsorbents from spent bleaching earth

Abstract

The removal of 2, 4‐D (2, 4‐ dichlorophenoxyacetic acid) from aqueous solutions by activated spent bleaching earths (SBE) was studied at 20 °C. Experiments were performed as a function of time, initial concentration, dose and particle size of the adsorbent. The Langmuir and Freundlich adsorption equations were fitted by the adsorption data obtained. The values of Langmuir and Freundlich constants were determined. The adsorption kinetic was found to follow Lagergren equation. Both the boundary layer and intraparticle diffusion played important roles in the adsorption rate of 2, 4‐D. As the size of the adsorbent increased, the time to reach equilibrium increased but adsorption capacity decreased.     

超滤技术处理造纸废水的研究与应用

介绍了超滤技术及其优点,其在制浆废液、漂白废水、纸机白水的处理中的研究应用进展;分析了超滤技术处理造纸废水中的膜污染;指出了影响超滤技术处理造纸废水应用的因素,最后提出了今后的研究方向。     

印制电路板酸性蚀刻废液的膜电解再生

高度精细化线路和高层数印制电路板产量的增加,导致酸性蚀刻废液的排放量越来越大,对环境的负荷也随之增大.介绍了酸性蚀刻废液膜电解再生的基本原理,进行了中试规模的应用研究,并与其他电解再生方法进行技术与经济比较分析.结果表明,在槽电压为5V、电解时间为2h的条件下,酸性蚀刻废液的氧化还原电位由480 mV升至540mV,所...     

采用重选法处理蚀刻废液零排放资源化新工艺

阐述了广州市白云区南溪化工厂开发出的一套国内首创的对线路板蚀刻废液进行大规模集中资源化处理的零排放处理新工艺,这套新工艺采用重力分选的方法将在固相条件下生成的氧化铜分离出来,克服了原有工艺的缺陷,达到了理想的分离效果,使废液中所有的成分能够在较低的处理成本下全部分离回收,完全无三废排出,达到了清洁生产的要求。