压入式局部通风工作面风流分布数值模拟研究

笔者应用三维k -ε紊流模型描述压入式局部通风工作面风流的流动过程 ,并采用控制容积法导出了描述流体流动方程的离散化方程式 ;用计算流体力学的方法求得了三维k -ε紊流模型的数值解。采用SIMPLE(压力耦合方程式的半阴解法 )算法解算流场 ;TDMA(三对角线算法 )和Gauss Seidel法结合通过线顺法求解离散方程。利用弱松弛法防止非线性方程组迭代求解过程中的发散现象 ,获得了掘进工作面空间的速度分布 ;并将模拟解算结果与在具有实际尺寸的拱形巷道模型中测得的实验结果进行了对比。数值计算结果与模型实验测定结果非常一致 ,验证了笔者的数学模型和数值模拟方法的正确性。     

Thermal Effects on the Airflow in a Street Canyon – Nantes'99 Experimental Results and Model Simulations

The thermal effects on the airflow within a street canyon, which are produced by the variation of direct solar heating of the street sides and ground, are examined in this article. The investigation is based on the experimental results of the Nantes'99 campaign and numerical simulations performed with the Computational Fluid Dynamics (CFD) code CHENSI using the standard k- model. The Nantes'99 experimental campaign was performed in a North-to-South oriented central street canyon of Nantes, France. It was observed that a thin thermal layer develops locally within a few centimetres from the heated wall. It is anticipated that, the convective flow close to the windward wall, which was visualised during the experiment, carries air masses from the street level upwards, where normally cleaner air is transported. Consequently, thermal effects may be important for the air quality in the street.Based on the temperature and wind flow measurements, the flow and temperature fields were simulated first in two dimensions with the CFD code CHENSI. It was found that CHENSI overestimates the thermal effects on the canyon airflow showing the main re-circulation simulated in the isothermal case to change into two counter-rotating vortices after the inclusion of the heating of the windward wall. A reason for this overestimation is possibly the temperature wall function implemented for such thin thermal boundary layers in conjunction with the limitations in grid resolution.     

泥石流的运动机理和减阻

野外调查研究发现,存在着两种具有不同动力学特征和机理的泥石流,粘滞性泥石流和两相泥石流,粘滞性泥石流由卵石、沙和粘土构成,难以区分固相和液相,为典型的非牛顿体,具有间歇性流动,“铺床现象”,高达60％的减阻和显著超高等流动特点,粘滞性泥石流的阻力远小于流变参数所代表的阻力,传统的利用本构方程研究阻力的方法不能解决问题,研究表明,其30％的减阻是由于铺床作用,另外20％－30％,是由于流动混合物充气所致,两相泥石流主要由粗颗粒物质构成,两相之间有明显的相对流动,显示较大的阻力和发生“石街”现象。粘滞性泥石流沟谷的中值坡度为0．16,两相泥石流阻力大,因而河谷的平均坡度较大（0．19－0．27）。     

一体式膜-生物反应器的水动力学特性

以研究一体式膜 -生物反应器的水动力学特性为目的 ,通过试验测定了反应器中膜间液体错流流速的分布和大小 ,建立了描述错流流速的计算模型 ,并考察了曝气量和反应器结构对错流流速的影响 .曝气量为 40 m³/h时 ,膜组件中部的错流流速为0.36～ 0.4³m/s,比膜组件 2边的流速约大 6.2%～ 21%.错流流速实测值与模型计算值吻合良好 .曝气量为 20～50 m³/h时 ,错流流速随曝气量的升高而增大 ,当曝气量大于 50 m³/h后错流流速逐渐趋向平稳 ;反应器高度越高 ,上升流通道越窄、下降流道和底部流道越宽 ,在同样曝气量条件下 ,可获得越大的错流流速 .     

广东鹤山酸雨地区针叶林与阔叶林降水化学特征

研究并比较了广东酸雨地区鹤山丘陵综合实验站区内不同类型森林降水的化学特征.结果表明,和大气降水相比,针阔叶林林内降水除NO3外其它离子含量都明显增加,马尾松针叶林冠层穿透雨和树干径流中离子含量增加倍数最高分别为34倍和12倍,阔叶林穿透雨和树干径流中离子含量增加倍数最高分别为8倍和10倍,针叶林降水比阔叶林降水离子富集程度较为显著．林内降水中马尾松针叶林树干径流离子总含量小于穿透雨离子总含量,阔叶林穿透雨离子总含量小于树干径流离子总含量.不同阔叶林型林内降水中离子含量是不同的.针叶林林内降水有进一步酸化趋势.林内降水离子富集导致森林冠层正负电荷数不平衡,营养离子大量淋失,使林冠层养分亏损．     

半干半湿烟气脱硫反应塔湿壁现象的分析

半干半湿烟气脱硫工艺特别适合我国中小型工业锅炉烟气脱硫的需要。提高脱硫效率、降低脱硫剂消耗主要依赖增湿程度的提高。然而,加湿会带来湿壁从而改变工艺干法特征,加速腐蚀,影响系统稳定性等问题。通过对一套工业试验性半干半湿FGD系统反应塔湿壁现象的测试分析发现:塔内涡流滞流区的存在,是湿壁的主要原因;塔壁与主流间过大的温差也经常导致结露湿壁。      

Increasing the efficiency of solute leaching: impacts of flow interruption with drainage of the “preferential flow paths”

Most soils contain preferential flow paths that can impact on solute mobility. Solutes can move rapidly down the preferential flow paths with high pore-water velocities, but can be held in the less permeable region of the soil matrix with low pore-water velocities, thereby reducing the efficiency of leaching. In this study, we conducted leaching experiments with interruption of the flow and drainage of the main flow paths to assess the efficiency of this type of leaching. We compared our experimental results to a simple analytical model, which predicts the influence of the variations in concentration gradients within a single spherical aggregate (SSA) surrounded by preferential flow paths on leaching. We used large (length: 300 mm, diameter: 216 mm) undisturbed field soil cores from two contrasting soil types. To carry out intermittent leaching experiments, the field soil cores were first saturated with tracer solution (CaBr₂), and background solution (CaCl₂) was applied to mimic a leaching event. The cores were then drained at 25- to 30-cm suction to empty the main flow paths to mimic a dry period during which solutes could redistribute within the undrained region. We also conducted continuous leaching experiments to assess the impact of the dry periods on the efficiency of leaching. The flow interruptions with drainage enhanced leaching by 10–20% for our soils, which was consistent with the model's prediction, given an optimised “equivalent aggregate radius” for each soil. This parameter quantifies the time scales that characterise diffusion within the undrained region of the soil, and allows us to calculate the duration of the leaching events and interruption periods that would lead to more efficient leaching. Application of these methodologies will aid development of strategies for improving management of chemicals in soils, needed in managing salts in soils, in improving fertiliser efficiency, and in reclaiming contaminated soils.     

Thermal and Rheological Properties of Commercial-Grade Poly(Lactic Acid)s

Poly(lactic acid) is the subject of considerable commercial development by a variety of organizations around the world. In this work, the thermal and rheological properties of two commercial-grade poly(lactic acid)s (PLAs) are investigated. A comparison of the commercial samples to a series of well-defined linear and star architecture PLAs provides considerable insight into their flow properties. Such insights are valuable in deciding processing strategies for these newly emerging, commercially significant, biodegradable plastics. Both a branched and linear grade of PLA are investigated. The crystallization kinetics of the branched polymer are inferred to be faster than the linear analog. Longer relaxation times in the terminal region for the branched material compared to the linear material manifests itself as a higher zero shear rate viscosity. However, the branched material shear thins more strongly, resulting in a lower value of viscosity at high shear rates. Comparison of the linear viscoelastic spectra of the branched material with the spectra for star PLAs suggests that the branched architecture is characterized by a span molecular weight of approximately 63,000 g/mol. The present study conclusively demonstrates that a wide spectrum of flow properties are available through simple architectural modification of PLA, thus allowing the utilization of this important degradable thermoplastic in a variety of processing operations.     

新疆泥石流成因类型和分布规律

泥石流是新疆的主要地质灾害。研究其成因类型和分布规律对制定防治对策 ,减轻国家财物和人民生命安全的损失 ,无疑具有重要的意义。     

Century Perspective of Heavy Metal Use in Urban Areas. A Case Study in Stockholm

The inflow and stock (amount in use) of heavy metals (cadmium(Cd), chromium (Cr), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni) and zinc (Zn)) in goods in 1995 have been quantifiedin the anthroposphere of Stockholm, Sweden. Statistics on national, regional and local level were used. Contacts were established with representatives from production and constructionin the industrial sector and with authorities. The results show that the stock of Cd is 0,2 kg per capita. For the other heavymetals the corresponding result per capita is: Cr 8, Cu 170, Hg 0,01, Ni 4, Pb 73 and Zn 40 kg. The inflow varies between2–8%of the stock indicating the importance of the stock. The lowestlevels are for Cu and Pb. Heavy metal levels in solid waste are high, between 15–45% of the amount in the inflow (Hg excluded), the lowest values were for Cu and Pb. Thus, recyclingis incomplete. Long life expectancy goods form the majority of the stock but there is a tendency that short life expectancy goods increase their importance in the inflow. Concealedgoods are also more frequent in inflow than in the stock.