Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.     

Incompatible Land Uses and the Topology of Cumulative Risk

The extensive literature on environmental justice has, by now, well defined the essential ingredients of cumulative risk, namely, incompatible land uses and vulnerability. Most problematic is the case when risk is produced by a large aggregation of small sources of air toxics. In this article, we test these notions in an area of Southern California, Southeast Los Angeles (SELA), which has come to be known as Asthmatown. Developing a rapid risk mapping protocol, we scan the neighborhood for small potential sources of air toxics and find, literally, hundreds of small point sources within a 2-mile radius, interspersed with residences. We also map the estimated cancer risks and noncancer hazard indices across the landscape. We find that, indeed, such large aggregations of even small, nondominant sources of air toxics can produce markedly elevated levels of risk. In this study, the risk profiles show additional cancer risks of up to 800 in a million and noncancer hazard indices of up to 200 in SELA due to the agglomeration of small point sources. This is significant (for example, estimates of the average regional point-source-related cancer risk range from 125 to 200 in a million). Most importantly, if we were to talk about the risk contour as if they were geological structures, we would observe not only a handful of distinct peaks, but a general “mountain range” running all throughout the study area, which underscores the ubiquity of risk in SELA. Just as cumulative risk has deeply embedded itself into the fabric of the place, so, too, must intervention seek to embed strategies into the institutions and practices of SELA. This has implications for advocacy, as seen in a recently initiated participatory action research project aimed at building health research capacities into the community in keeping with an ethic of care.     

Dissipation,residues, and risk assessment of imidacloprid in Zizania latifolia and purple sweet potato under field conditions using LC-MS/MS

A shortened version of Quick, Easy, Cheap, Effective, Rugged, and Safe method (QuEChERS) for determining the dissipation and residue of imidacloprid present in Zizania latifolia and purple sweet potato was established by using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The average recoveries of imidacloprid in the two crops ranged from 82.12 to 113.79%, with relative standard deviation (RSD) of <7.32%. The dissipation dynamics of imidacloprid in Z. latifolia plants and purple sweet potato plants followed first-order kinetics, with half-lives of 3.2–5.5?days in each of sampling locations. The terminal imidacloprid residues in Z. latifolia and purple sweet potato at each of location were <0.005–0.120?mg kg^?1. According to the risk assessment results, both the acute dietary risk quotient and chronic dietary risk quotient values were <1, indicating that imidacloprid is unlikely to pose health risks to humans with normal recommended use. The present study may serve as a valuable reference for the safe and reasonable use of imidacloprid in Z. latifolia and purple sweet potato fields.     

仙女湖富营养化特征与水环境容量核算

以典型的亚热带大型水库——江西省仙女湖为例,于2011~2013年季节性监测了仙女湖水体理化指标。采用综合营养状态指数法对其富营养化状态进行了评价,并采用沃伦威德尔模型(Vollenweider)和狄龙模型(Dillon)计算了COD、NH₃-N、TN和TP的水环境容量。结果表明:仙女湖水质总体处于地表水Ⅱ类~Ⅲ类标准,TN 0.32~0.91 mg/L、平均0.59 mg/L,NH₃-N 0.012~0.59 mg/L、平均0.31 mg/L,TP 0.017~0.080 mg/L、平均0.028 mg/L,COD_Mn 1.61~5.59 mg/L、平均2.85 mg/L,Chl-a 0.37~0.95 μg/L、平均0.56 μg/L。从湖区上游到下游,各指标尤其是总氮、总磷、透明度和氨氮呈现明显的趋优变化特征,除TP出现Ⅲ类水质外,其余指标多年持续处于Ⅱ类水质状态;从单因子状态指数来看,采用透明度评价的营养状态最高,大部分湖区持续处于轻度富营养状态;TN和TP评价的营养状态次之,处于中营养水平。仙女湖COD、NH₃-N、TN和TP水环境容量分别为21 208.0、3 528.8、4 991.2和248.1 t/a,分别剩余容量比率56.88%、68.25%、62.89%和13.67%,影响仙女湖水环境容量最突出的环境因子为TP。同时,基于对水环境容量影响因素的分析,最后提出了提高仙女湖区水环境容量的建设性方案。     

岷江上游生态脆弱性评价

岷江上游流域是我国典型的生态脆弱区之一,由于地质变化频繁、高差显著、气候干旱,加上人为活动影响,生态脆弱性的表现十分明显。通过对其生态环境脆弱性因素及成因机制的分析,构建了由土地生产力、地表起伏度、干燥度指数、土壤侵蚀强度、草场退化荒漠化率、物种消失率等14个指标组成的岷江上游生态脆弱性的评价指标体系;根据本地区生态环境现状、全国和四川省情况及奋斗目标,建立了Ⅰ到Ⅲ级的评价标准体系;利用模糊数学聚类方法对评价指标进行分析计算,得出了岷江上游生态环境为第Ⅲ级,即生态环境非常脆弱的结论。评价结果符合岷江上游地区的生态环境状况。     

气候变化和人类活动对丹江口入库径流的影响及评估

科学估算气候变化和人类活动对河川径流的影响,可以更为合理地规划利用地球水资源。针对丹江口水库入库径流的减少问题,分别采用Mann-Kendall方法和Pettitt检验,对1960~2012年间丹江口水库入库径流的年际和年内变化趋势进行了分析,并与同时期汉江上游20个地面观测站的降水、气温的年际和年内演化趋势进行了比较,从气候变化和人类活动影响的两个方面分析了入库径流减少的原因。在此基础上,利用气候弹性模型分别估算了气候变化和人类活动对径流的影响度。结果表明:近年来丹江口入库径流的减少主要受春季和秋季径流减少的影响,在春季径流的减少总量中,气候变化的贡献度为67%,人类活动为33%;秋季径流的减少总量中,气候变化的贡献度为88%,人类活动为12%。气候变化是导致丹江口入库径流减少的主要原因。     

一种新的汛期降水集中期划分方法

汛期降水集中期是近期气象学者提出的表征汛期气候的一种新的特征量,它在气候研究中体现了较好的灵活性、客观性,通过对其分析,可为汛期气候的诊断和预测提供依据。但现在普遍使用的降水集中期在计算方法和时间长度上存在缺陷,特别是运用到时间跨度较长时段的气候分析时,特征量表征作用就有所缺失,而且计算方法较为复杂。为更好地使用降水集中期这一特征量,提出了以15天作为时长,用滑动统计来划定汛期降水集中期的新方法,并运用统计方法、天气气候学方法进行了论证,同时在长江下游主雨季降水集中期分析和金华地区汛期分析两个实例中进行了应用检验。结果表明,汛期降水集中期新方法划定的特征量与汛期降水总量存在时间上的相对独立性和总趋势上的显著相关性,且在汛期气候极端灾害事件上有较强的描述能力。因此认为,15天滑动统计新方法划定的汛期降水集中期使用便捷,天气气候意义明确,在实际应用中更为客观有效。     

Ecosystem services assessments in local municipal decision making in South Africa: justification for the use of a business-based approach

The ecosystem services (ES) concept is being increasingly incorporated into environmental policy formulation and management approaches. The Corporate Ecosystem Services Review (ESR) is a framework used to assess the dependence and impact that a business has on ES. The success of the corporate experience of ES assessment provides an opportunity for adaption for local authority decision making. In this paper, the ESR tool was adapted to the South African setting at a local government level, and tested at two sites in the Msunduzi Municipality, KwaZulu-Natal. In testing the tool and gathering feedback from key stakeholders, it was found that there are both opportunities and challenges to this approach. Overall, however, it provides an opportunity for the systematic inclusion of ES assessment into existing regulatory frameworks for land-use planning and Integrated Environmental Management, whether in a strategic application, at a broader spatial (municipal) scale or in a specific locale within the municipality.