CHEMISTRY OF COALBED METHANE DISCHARGE WATER INTERACTING WITH SEMI‐ARID EPHEMERAL STREAM CHANNELS1

ABSTRACT: The objective of this study was to examine the chemistry of Coalbed Methane (CBM) discharge water reacting with semi‐arid ephemeral stream channels in the Powder River Basin, Wyoming. The study area consisted of two ephemeral streams: Burger Draw and Sue Draw. These streams are tributaries to the perennial Powder River. Samples were collected bimonthly from three CBM discharge points and seven channel locations in Burger Draw and Sue Draw. Samples were also collected bimonthly from the Powder River above and below the confluence of Burger Draw. Before sample collection, the pH and electrical conductivity (EC) were measured in the field. Samples were transported to the laboratory and analyzed for alkalinity, major cations, and anions. From the measurement of sodium (Na), calcium (Ca), and magnesium (Mg), practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated. Results suggest pH and EC of CBM discharge water was 7.1 and 4.3 dS/m, respectively. The CBM discharge water consisted of higher concentrations of sodium and alkalinity compared to other components. The pH of CBM discharge water increased significantly (p = 0.000) in the downstream channel of Burger Draw from 7.1 to 8.84 before it joined with the Powder River. Dissolved calcium concentration of CBM discharge water decreased significantly (p = 0.000) in the downstream channel water. Subsequently, SARp increased approximately from 24 to 29. The SARt also increased significantly (p = 0.001) in the downstream channel water. For instance, SARt of CBM discharge water increased from 32.93 to 45.5 downstream channels after the confluence of Sue Draw with the Burger Draw. The only significant difference in water chemistry above and below the confluence of Burger Draw with the Powder River was pH, which increased from 8.36 to 8.52. The significant increase in SAR values of CBM discharge water in Burger Draw and Sue Draw tributaries suggest a careful monitoring of salinity and sodicity is needed if CBM discharge water is used for irrigation in semi‐arid environments. Results discussed in this study will be useful to downstream water users who depend on water for irrigation.     

TRANSIENT RESPONSE FUNCTIONS FOR CONJUNCTIVE WATER MANAGEMENT IN THE SNAKE RIVER PLAIN,IDAHO1

ABSTRACT: Increasing demands on western water are causing a mounting need for the conjunctive management of surface water and ground water resources. Under western water law, the senior water rights holder has priority over the junior water rights holder in times of water shortage. Water managers have been reluctant to conjunctively manage surface water and ground water resources because of the difficulty of quantification of the impacts to surface water resources from ground water stresses. Impacts from ground water use can take years to propagate through an aquifer system. Prediction of the degree of impact to surface water resources over time and the spatial distribution of impacts is very difficult. Response functions mathematically describe the relationship between a unit ground water stress applied at a specific location and stream depletion or aquifer water level change elsewhere in the system. Response functions can be used to help quantify the spatial and temporal impacts to surface water resources caused by ground water pumping. This paper describes the theory of response functions and presents an application of transient response functions in the Snake River Plain, Idaho. Transient response functions can be used to facilitate the conjunctive management of surface and ground water not only in the eastern Snake River Plain basin, but also in similar basins throughout the western United States.     

利用高温废气治理焦化酚氰污水项目实践

阐述了利用焦炉、窑炉、电厂等高温废气处理焦化污水的理论及工业实践,该工艺具有投资省、运行费用低的突出优点.     

Discriminate Analysis for Dust Storm Prediction in the Gobi and Steppe Regions in Mongolia

A discriminate analysis method for probability forecast of dust storms in Mongolia has been developed. The prediction method uses data recorded at 23 meteorological stations in the Gobi and steppe regions of Mongolia, including surface air pressure and geo-potential height at the 500-hPa level on grid points, and weather maps from 1975 to 1990. Weather elements such as air temperature, pressure, geo-potential height etc, which influence the formation of dust storms, are prepared as predictors. To select the most informative/important predictors (variables), we used a mean correlation matrix of variables together with the Mahalonobis distance, and correlation coefficients between dust storms and predictors with an orthogonalization for removing correlated predictors. The most informative predictors for dust storm prediction are intensities of surface cyclones and migratory anticyclones, passage of cold fronts, the horizontal gradients of the surface air pressure in the cold frontal zone, cyclonic circulations from the ground surface up to the 500-hPa level, the geo-potential height at 500-hPa level and its temporal changes. Selected predictors are used in discriminate analysis for formulating dust storm prediction equations. Sandstorm data have been classified into three classes, viz., strong, moderate and weak dust storms, depending on their intensities, durations and areas covered. Predictions of the probabilities of dust storm occurrence use the prediction equations for each class. The prediction is made from 12 hours to 36 hours. Verification of the probability forecasts of dust storms is also shown. The accuracy of forecasts is 72.2–79.9% with the data used for developing equations (dependent variables), in contrast to 67.1–72.0% with unrelated data for deriving equations (independent variables).     

大气环境影响评价工作分级要求要点

根据大气环境影响评价工作的分级要求,提出了针对性的工作要点,以满足大气环境评价工作的需要.     

Non-native Species <Emphasis Type="Italic">DO</Emphasis> Threaten the Natural Environment!

Sagoff [Journal of Agricultural and Environmental Ethics 18 (2005), 215–236] argues, against growing empirical evidence, that major environmental impacts of non-native species are unproven. However, many such impacts, including extinctions of both island and continental species, have both been demonstrated and judged by the public to be harmful. Although more public attention has been focused on non-native animals than non-native plants, the latter more often cause ecosystem-wide impacts. Increased regulation of introduction of non-native species is, therefore, warranted, and, contra Sagoff’s assertions, invasion biologists have recently developed methods that greatly aid prediction of which introduced species will harm the environment and thus enable more efficient regulation. The fact that introduced species may increase local biodiversity in certain instances has not been shown to result in desired changes in ecosystem function. In other locales, they decrease biodiversity, as they do globally.     

FOREST HARVESTING AND STREAMWATER INORGANIC CHEMISTRY IN WESTERN NORTH AMERICA: A REVIEW1

The solution chemistry of forested streams primarily in western North America is explained by considering the major factors that influence this chemistry — geological weathering; atmospheric precipitation and climate; precipitation acidity; terrestrial biological processes; physical/chemical reactions in the soil; and physical, chemical, and biological processes within streams. Due to the complexity of all these processes and their varying importance for different chemicals, stream water chemistry has exhibited considerable geographic and temporal variation and is difficult to model accurately. The impacts of forest harvesting on stream water chemistry were reviewed by considering the effects of harvesting on each of the important factors controlling this chemistry, as well as other factors influencing these impacts ‐ extent of the watershed harvested, presence of buffer strips between streams and harvested areas, nature of post‐harvesting site preparation, revegetation rate following harvesting, pre‐harvesting soil fertility, and soil buffering capacity. These effects have sometimes reinforced one another but have sometimes been counterbalancing or slight so that harvesting impacts on stream water chemistry have been highly variable. Eight major knowledge gaps were identified, two of which — a scarcity of detailed stream chemical budgets and knowledge of longitudinal variation in stream chemistry — relate to undisturbed streams, while the remainder relate to forest harvesting effects.     

ACCURACY OF LAKE AND STREAM TEMPERATURES ESTIMATED FROM THERMAL INFRARED IMAGES1

Emitted thermal infrared radiation (TIR, λ= 8 to 14 μm) can be used to measure surface water temperatures (top approximately 100 μm). This study evaluates the accuracy of stream (50 to 500 m wide) and lake (300 to 5,000 m wide) radiant temperatures (15 to 22°C) derived from airborne (MASTER, 5 to 15 m) and satellite (ASTER 90 m, Landsat ETM+ 60 m) TIR images. Applied atmospheric compensations changed water temperatures by ?0.2 to +2.0°C. Atmospheric compensation depended primarily on atmospheric water vapor and temperature, sensor viewing geometry, and water temperature. Agreement between multiple TIR bands (MASTER ‐ 10 bands, ASTER ‐ 5 bands) provided an independent check on recovered temperatures. Compensations improved agreement between image and in situ surface temperatures (from 2.0 to 1.1°C average deviation); however, compensations did not improve agreement between river image temperatures and loggers installed at the stream bed (from 0.6 to 1.6°C average deviation). Analysis of field temperatures suggests that vertical thermal stratification may have caused a systematic difference between instream gage temperatures and corrected image temperatures. As a result, agreement between image temperatures and instream temperatures did not imply that accurate TIR temperatures were recovered. Based on these analyses, practical accuracies for corrected TIR lake and stream surface temperatures are around 1°C.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.