DQS设备在压裂返排液处理中的应用

针对吉林油田压裂返排液有机物含量、稳定性以及分子量均较高的特点,采用混凝气浮、生化降解与活性炭吸附工艺,研发制造了DQS模块化组合设备并在吉林油田乾安采油厂投入生产。实际应用结果表明:经该设备处理后的出水CODCr为35mg/L、SS为2.6mg/L、石油类为0.54mg/L,达到GB 8978-1996《污水综合排放标准》中一级排放标准。     

Fluid Mechanics of Serpentine Flow Fields on a Porous Media

Laminar flows are investigated in single and double parallel serpentine channels mounted on a porous media and it is found that significant convective transport occurs in porous media for practical fuel cell conditions. This transport increases with increasing flow Reynolds number, with decreasing land width, and most significantly with increasing channel length.

Increasing the number of parallel channels significantly decreases the pressure drop across the fuel cell, but also significantly decreases the magnitude of convective transport in the porous media. Increased parasitic loads must be put in the context of the change in electrochemical performance.

This paper presents both data and a methodology for beginning to think about flow field design from a hydrodynamic perspective.     

Gear oil formulation designed to meet bio-preferred criteria as well as give high performance

A bio-based gear oil was developed from soybean oil (SBO). The SBO was first thermally polymerised and then mixed with additives and diluents. The effect of pour point depressants, co-base oils, antioxidants and anti-wear additives is reported. Lubricity, viscosity index and oxidation stability of the final formulation of the bio-based gear oil are compared with commercially available gear oils. The final formulation of bio-based gear oil gives test results: viscosity index 165, four-ball wear scar 0.375 mm. These numbers are comparable to or better than the commercially available gear oils tested for comparison. The oxidation onset temperature of the bio-based gear oil, 220°C, is lower than the evaluated commercial products, but still at an acceptable range for gear oil.     

A CFD based explosion risk analysis methodology using time varying release rates in dispersion simulations

A full probabilistic Explosion Risk Analysis (ERA) is commonly used to establish overpressure exceedance curves for offshore facilities. This involves modelling a large number of gas dispersion and explosion scenarios. Capturing the time dependant build up and decay of a flammable gas cloud size along with its shape and location are important parameters that can govern the results of an ERA. Dispersion simulations using Computational Fluid Dynamics (CFD) are generally carried out in detailed ERA studies to obtain these pieces of information. However, these dispersion simulations are typically modelled with constant release rates leading to steady state results. The basic assumption used here is that the flammable gas cloud build up rate from these constant release rate dispersion simulations would mimic the actual transient cloud build up rate from a time varying release rate. This assumption does not correctly capture the physical phenomena of transient gas releases and their subsequent dispersion and may lead to very conservative results. This in turn results in potential over design of facilities with implications on time, materials and cost of a project.In the current work, an ERA methodology is proposed that uses time varying release rates as an input in the CFD dispersion simulations to obtain the fully transient flammable gas cloud build-up and decay, while ensuring the total time required to perform the ERA study is also reduced. It was found that the proposed ERA methodology leads to improved accuracy in dispersion results, steeper overpressure exceedance curves and a significant reduction in the Design Accidental Load (DAL) values whilst still maintaining some conservatism and also reducing the total time required to perform an ERA study.     

油田压裂返排液处理技术研究进展

分析了油田压裂返排液的组分和特点,归纳总结了成熟的传统压裂返排液处理技术和新型处理技术的优缺点,提出了压裂返排液处理应朝着优化工艺组合、开发高级氧化和电絮凝等新技术、研制撬装处理设备使处理工艺模块化和有效成分回收利用等未来方向发展,为油田压裂返排液无害化、资源化处理技术的研发提供了思路和参考。     

超临界水氧化法处理含油污泥

采用间歇式超临界水氧化(SCWO)反应器处理采油过程产生的含油污泥,考察了反应参数对污泥COD去除率的影响。实验结果表明,当初始COD为1 000 mg/L、反应温度为420℃、反应时间为10 min,反应压力为24 MPa、溶液pH为10、过氧比为400%时,SCWO法对含油污泥的COD去除率为92.20%,收集液COD低于GB8978—1996规定的一级排放标准(100 mg/L)。     

超临界水氧化处理煤气化生化污泥

采用超临界水氧化(SCWO)技术处理煤气化生化污泥,优化了处理工艺条件,考察了有机污染物和重金属的去除效果。实验结果表明,处理含水率为90%(w)的污泥的最佳工艺条件为:反应温度580℃、反应压力25MPa、氧化系数(初始反应加入的H_2O_2的摩尔数与理论上废水完全氧化所需的H2O2的摩尔数之比)4.0、反应时间2 min。SCWO处理后的气相产物为O2、CO2和少量N2,清洁环保,可直接排放或回收利用。液相产物中的主要有机污染物和重金属含量均大幅降低,出水达到GB 8978—1996《污水综合排放标准》,可直接排放或回用。固相残渣浸出液中重金属含量均低于GB 5085.3—2007《危险废物鉴别标准浸出毒性鉴别》,可直接进行填埋处理或资源化利用。     

卡鲁塞尔氧化沟液-固两相流动混合物模型与两相水力特性模拟

采用CFD数值计算的方法研究了卡鲁塞尔氧化沟工艺的污水-污泥两相水力特性.将污泥沉降模型进行湍流影响修正后与两相湍流混合物模型耦合,建立了氧化沟液固两相湍流混合物模型,实现了垂向上液固两相运动的分离;利用计算流体软件Fluent对工业规模污水厂氯化沟的污水-污泥两相流速进行模拟,结果表明,两相流混合物模型较好地揭示了氧化沟内混合液流场和污泥的分布情况,污泥浓度与流速呈负相关.     

Application of surrogate methods for assessing the bioavailability of PAHs in sediments to a sediment ingesting bivalve

The usefulness of two surrogate methods for rapidly determining the bioavailability of PAHs in hydrocarbon-contaminated marine sediments was assessed. Comparisons are made between the PAHs accumulated by the benthic bivalve, Tellina deltoidalis, and the extractable-PAHs determined using a 6-h XAD-2 resin desorption method and a 4-h gut fluid mimic (GFM) extraction method. There were significant positive relationships between PAH bioaccumulation by the bivalves and sediment PAH concentrations. These relationships were not improved by normalising the sediment PAH concentrations to the organic carbon concentration. The average percentage lipid content of the bivalves was 1.47 ± 0.22% and BSAFs for total-PAHs ranged from 0.06 to 0.80 (kg OC/kg lipid). The XAD-2 and GFM methods both extracted varying amounts of PAHs from the sediments. Low concentrations of PAHs were extracted by the GFM method (0.2–3.6% of total-PAHs in sediments) and the GFM results were inadequate for generalising about the bioavailability of the PAHs in the sediments. The XAD-2 method extracted greater amounts of PAHs (3–34% of total-PAHs in sediments), however, the total-PAH concentrations in the sediments provided a better, or equally good, prediction of PAH bioaccumulation by T. deltoidalis. The results indicated that these methods required further development before they can be applied routinely as surrogate methods for assessing the bioavailability of PAHs in sediments. Future research should be directed towards lowering detection limits and obtaining comparative data for a greater range of sediment types, contaminant classes and concentrations, and organisms of different feeding guilds and with different gut chemistry.     

超临界流体技术在环境保护与治理中的应用

本文介绍了超临界流体的特性，对超临界流体技术（超临界流体清洁生产、超临界流体萃取、超临界流体色谱及超临界水氧化等）在环境保护与环境治理中的应用进行了综述。