疫情下医疗废物的处置现状分析

2019年新冠疫情席卷全球,在疫情环境下,医疗废物大幅增多,全国各大城市纷纷出现医疗废物处置不当的现象。本文对国内外现状分析,在认知、设施、管理和监督四个方面发现存在一定的问题,通过加强教育、加大储备、完善机制和改善监管的建议,为提升医疗废物应急处置能力提供参考。     

应用相平衡分配法建立湘江衡阳段沉积物重金属质量基准

采集湘江衡阳段29个站点的表层沉积物样品,测定沉积物中4种重金属(Cu、Pb、Zn和Cd)含量及赋存形态、以及孔隙水中重金属含量,根据相平衡分配法的基本理论,考虑参与沉积物-水相平衡分配的重金属组成,实测法计算重金属的沉积物-水相平衡分配系数(Kp),分别引用美国EPA制定保护水生生物不受重金属慢性毒性影响的基本连续浓度(CCC)和我国地表水环境质量标准(GB 3838-2002)Ⅰ类水质标准,建立两种湘江衡阳段沉积物重金属质量基准(SQC)进行对比分析,其中基于美国CCC建立的湘江衡阳段沉积物重金属质量基准与国内外研究成果相比可比性较好,4种重金属(Cu、Pb、Zn和Cd)的SQC值分别为64.62、55.57、1 360.40和2.34μg.g-1,此SQC具有保护长期生活于沉积物中的底栖生物不受重金属慢性毒性影响的意义.通过单因子评价法将湘江衡阳段沉积物中重金属总量与沉积物质量基准值(SQC)进行比较,结果表明,湘江衡阳段沉积物中Cd和Pb含量水平对底栖生物具有较大的慢性毒性影响,Cd污染不容忽视.     

制革废水和印染废水的综合毒性评估及鉴别

研究采用成组生物毒性试验(发光菌急性毒性、斑马鱼幼鱼急性毒性,斑马鱼胚胎发育毒性和小球藻急性毒性),结合理化指标,通过毒性单位、平均毒性(average toxicity,Av Tx)、毒性指数(toxic print,Tx Pr)、最敏感的测试(most sensitive test,MST)和潜在毒性效应指数(potential ecotoxic effects probe,PEEP)对不同工艺阶段印染及制革废水进行毒性削减评估.结果表明PEEP能兼顾废水排放量与毒性效应,更为客观地表征了废水综合毒性,PEEP评价结果显示制革废水和印染废水的毒性削减率分别达到36.8%和23.2%.最后,以发光菌作为受试生物,采用毒性鉴别评估(toxicity identification evaluation,TIE)技术,对印染废水进行毒性鉴别.结果表明,印染废水中主要的致毒物质为非极性有机污染,其次为可滤性化合物,然后是重金属、氧化性物质以及挥发性物质.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

Structure and activity of thermophilic methanogenic microbial communities exposed to quaternary ammonium sanitizer

Food processing facilities often use antimicrobial quaternary ammonium compound (QAC) sanitizers to maintain cleanliness. These QACs can end up in wastewaters used as feedstock for anaerobic digestion. The aim of this study was to measure the effect of QAC contamination on biogas production and structure of microbial communities in thermophilic digester sludge. Methane production and biogas quality data were analyzed in batch anaerobic digesters containing QAC at 0, 15, 50, 100 and 150 mg/L. Increasing sanitizer concentration in the bioreactors negatively impacted methane production rate and biogas quality. Microbial community composition data was obtained through 16S rRNA gene sequencing from the QAC-contaminated sludges. Sequencing data showed no significant restructuring of the bacterial communities. However, significant restructuring was observed within the archaeal communities as QAC concentration increased. Further studies to confirm these effects on a larger scale and with a longer retention time are necessary.     

北方高盐景观水体氮磷时空分布特征及富营养化评价

为掌握北方高盐景观水体的水环境状况,选取天津市中新生态城3个景观水体(清净湖、蓟运河和蓟运河故道)为研究对象,于2013年12月—2014年11月对其进行定期取样监测,开展水体氮磷污染特征分析及富营养化评价。结果表明:1)蓟运河、清净湖和蓟运河故道的TDS均值分别为3.42,4.64,20.2 g/L,属于高盐景观水体;2)水体TN和TP浓度逐月变化显著,水质整体上冬春季优于夏秋季,其中蓟运河TP和TN的浓度最大,且波动较大;3)根据TN/TP比值判定,研究区水体除清净湖在短时间表现为氮限制外,水体大部分时间段内表现为磷限制,P为主要限制因子;4)富营养化评价表明:水体均处于富营养状态,且有蓟运河蓟运河故道清净湖;5)相关性结果表明:TDS与电导率、水温及EI呈显著正相关,相关系数分别为0.905、0.822和0.645,盐度也是影响富营养化的关键因素。     

基于主成分分析法的陕北地区可持续发展对比研究

基于可持续发展基本理论,选取60项指标建立陕北地区可持续发展评价指标体系,采用软件SPSS(19.0)进行主成分分析,分别对延安市、榆林市2000—2014年的可持续发展水平、可持续发展潜力和可持续发展协调度进行动态对比分析。结果表明延安市、榆林市发展基本趋于一致:可持续发展水平较高,但可持续发展潜力明显不足,可持续发展协调度较低;制约其可持续发展的主要因素在于资源发展动力不足、产业结构单一、环境的恶化及治理的低效。     

小城镇产业集群主要污染源筛查与影响分析

以郫县安德镇川菜产业园为研究对象,采用等标污染负荷法对污染影响进行了标准化评价。结果发现:川菜产业园主要的工业污染行业为豆制品加工行业,排污量为2 919.94 t/a,占总排污量的96.46%,等标污染负荷为9.83,占总污染负荷的92.83%,其中有6家企业为主要控制对象。对比分析发现,环境污染受企业规模、末端处理方式、废水排放量等多方面因素共同影响。所有污染因子中,BOD对环境的实质污染影响较大。该研究成果将为优化小城镇产业集群的规划、管理和污染物总量控制提供有价值的参考。     

铁炭内电解垂直流人工湿地对污水厂尾水深度脱氮效果

针对污水厂尾水总氮(TN)含量偏高、微生物可利用碳源低的问题,构建铁炭内电解垂直流人工湿地(ICIE-VFCW)装置,研究了ICIE-VFCW对尾水的处理效果,并采用紫外-可见光光谱(UV-VIS)、凝胶过滤色谱(GFC),进一步探讨了ICIEVFCW强化脱氮机制.结果表明,ICIE-VFCW可提高系统对尾水中COD的去除,出水COD可稳定在30 mg·L~(-1)以下,全年、暖季、寒季COD平均去除率较普通垂直流人工湿地分别可提高10.16%、9.81%、11.22%.系统出水TN可维持在10 mg·L~(-1)以下,全年、暖季、寒季TN平均去除率较普通垂直流人工湿地分别提高13.72%、12.90%、16.17%.经过人工湿地处理后,污水中有机物的腐殖度、芳香度及相对分子质量(Mr)均有所下降,且ICIE-VFCW中Mr下降更为明显.湿地基质掺杂铁炭可促进尾水中大分子有机物转化为小分子,为微生物提供更多可利用碳源,从而提高脱氮效率.     

某站场对焊法兰环焊缝缺陷原因分析

目的研究法兰环焊缝缺陷产生的原因,采取相应针对性措施,预防泄露事故发生。方法通过宏观分析、超声检测、化学成分分析、金相分析、能谱分析对环焊缝裂纹形成原因进行分析。结果裂纹起源于根焊焊材与母材间,两端较为平滑,沿环焊缝周向方向扩展。焊缝中夹渣的残留药皮和层间未熔合缺陷,是形成裂纹的内在原因。结论焊缝产生裂纹由焊接参数控制不当引起的。