高效磷吸附剂Mg/Al-LDO的制备及除磷机制

针对污水中磷的去除问题,采用优化后的恒定pH值共沉淀法制备了Mg/Al-layered double hydroxides(Mg/Al-LDHs),经高温焙烧得到高效磷吸附剂Mg/Al-layered double oxide(Mg/Al-LDO);在对其吸附特性研究的基础上,并结合Zeta电位、XRD、FTIR分析吸附前后材料等电点、晶体结构及层间阴离子的变化,探讨Mg/Al-LDO吸附除磷机制.结果表明,采用优化后的共沉淀法,在Mg/Al比为2∶1,焙烧温度450℃,焙烧时间2 h条件下制备出的Mg/Al-LDO对磷酸根吸附性最好,最大吸附容量可达到176.94 mg·g-1,与理论吸附容量191.57 mg·g-1基本一致,远高出Mg/Al-LDHs及其它磷吸附剂.实验数据对准二级反应动力学模型的拟合结果较好,吸附过程符合Langmuir吸附等温模型.结合Zeta电位、XRD、FTIR的结果推测,Mg/AlLDO吸附除磷主要是通过静电引力、阴离子插层、离子交换、表面配位这4种作用协同完成.     

苯基改性的介孔分子筛SBA-15的合成与表征

采用一步法在酸性条件下以聚乙氧基聚丙氧基聚乙氧基三嵌段共聚物(P123)为模板剂,用正硅酸乙酯(TEOS)和苯基三甲氧基硅烷(PTMS)直接缩合制备了苯基改性介孔分子筛Ph-SBA-15,并用红外光谱(FTIR)、小角X射线衍射(SAXRD)、热重分析(TGA)、透射电镜(TEM)和氮气吸附-脱附对样品进行了表征。结果表明,制备的样品不仅保持了高度有序的SBA-15的二维六角结构,而且具有较高的热稳定性,较大的比表面,孔容和孔径。     

Co- or Ni-modified Sn-MnOx low-dimensional multi-oxides for high-efficient NH3-SCR De-NOx: Performance optimization and reaction mechanism

NH₃-SCR performances were explored to the relationship between structure morphology and physio-chemical properties over low-dimensional ternary Mn-based catalysts prepared by one-step synthesis method.Due to its strong oxidation performance,Sn-MnOx was prone to side reactions between NO,NH₃ and O₂,resulting in the generation of more NO₂ and N₂ O,here most of N₂ O was driven from the non-selective oxidation of NH₃,while ...     

Ti-MCM-41的微波水热法合成、表征及其催化氧化性质研究

本研究利用微波水热法合成Ti-MCM-41,并采用XRD、FTIR、BET、XPS及TEM等技术对材料进行表征.同时,使用甲基橙溶液作为光催化氧化的对象,对光催化剂的氧化性能进行考察.实验结果表明:利用微波水热法合成Ti-MCM-41,可将合成时间缩短至3 h,能够大大缩减反应时间并节省能源.通过在MCM-41多孔结构中掺杂钛,可明显提高其光催化活性.在酸性溶液中,Ti-MCM-41的催化氧化效率较高.XRD、FTIR、BET、XPS及TEM等表征结果表明,钛成功地掺入到了MCM-41中,并未破坏其多孔有序的结构,Ti-MCM-41同时兼具介孔材料的高比表面积和二氧化钛的光催化性能,有利于在环境污染修复上的应用.     

Best‐practice recommendations for estimating interaction effects using meta‐analysis

One of the key advantages of meta‐analysis (i.e., a quantitative literature review) over a narrative literature review is that it allows for formal tests of interaction effects—namely, whether the relationship between two variables is contingent upon the value of another (moderator) variable. Interaction effects play a central role in organizational science research because they highlight boundary conditions of a theory: Conditions under which relationships change in strength and/or direction. This article describes procedures for estimating interaction effects using meta‐analysis, distills the technical literature for a general readership of organizational science researchers, and includes specific best‐practice recommendations regarding actions researchers can take before and after data collection to improve the accuracy of substantive conclusions regarding interaction effects investigated meta‐analytically. Copyright © 2010 John Wiley & Sons, Ltd.     

活性污泥合成聚羟基烷酸(PHAs)的研究进展

聚羟基烷酸(PHAs)是微生物合成的作为碳源和能源的贮存物。PHA同时也是一种可完全生物降解的塑料,由于其良好的环境效应及机械性能,受到广泛关注。使用活性污泥及廉价基质合成PHA以降低生产成本有很好的应用前景。文章综述了活性污泥合成PHA的最新研究进展,包括活性污泥合成PHA的工艺、影响因素及提高PHA合成量的策略。     

TiO2复合催化剂弱光催化降解模拟海水中苯酚及其催化活性的影响

为了获得适用于海水中有机污染物光降解催化剂,分别选用纳米SiO_2粒子和氧化石墨烯GO为载体,利用吸附相反应技术并结合热处理过程制备了基于TiO_2的复合催化剂,研究了弱光(光强小于1mW·cm~(-3))激发下复合催化剂光催化降解模拟海水中苯酚.结果表明,吸附相反应技术结合焙烧得到的La~(3+)掺杂TiO_2-SiO_2,表面亲水性较强和对苯酚吸附能力较弱,难以克服盐离子的干扰并有效降解模拟海水中高浓度苯酚.而吸附相反应技术结合醇溶剂热还原处理后,La~(3+)掺杂TiO_2-SiO_2催化剂表面亲水性显著减弱,但该催化剂在模拟海水中不能形成稳定的悬浮体系.吸附相反应技术得到的TiO_2-GO和La~(3+)掺杂TiO_2-GO中,TiO_2粒子粒径小于10nm且均匀负载于GO的表面.醇溶剂热还原处理可使TiO_2形成晶型结构,从而提高其催化活性,同时还能将GO表面的含氧基团还原,降低催化剂表面亲水性.从而提升催化剂对苯酚的吸附能力和对盐离子的抗干扰能力.另外,还原GO与小粒径TiO_2粒子紧密结合,使光生电子能很快转移至还原GO表面,增大光生电荷分离率,进一步提升催化剂的光降解性能.     

Selective sorptive removal of Methyl Red from individual and binary component solutions by mesoporous organosilicas of MCM-41 type

Organosilicas with chemically immobilized 3-aminopropyl and Methyl Red-containing surface groups were prepared by sol-gel condensation of tetraethyl orthosilicate and (3-aminopropyl)triethoxysilane in the presence of dye as part of the mixed micelles or dye-containing silane as silica source. The hexagonally arranged mesoporous structure of synthesized materials was confirmed by low-temperature nitrogen adsorption-desorption, x-ray diffraction, and TEM studies. Chemical composition of MCM-41-type organosilicas was established by FT-IR spectroscopy and chemical analysis of surface layer. Sorption of Methyl Red by organosilicas was studied from diluted phosphate buffer solutions in dependence of medium pH, duration of contact, and equilibrium concentration of dye. It was found that effective removal of Methyl Red takes place at pH values within a range of 2.5?5. Kinetic curves of Methyl Red sorption on organosilicas were analyzed by the Lagergren, Ho-McKey, and Weber-Morris kinetic models. It was found that the pseudo-second-order model fits the kinetics of Methyl Red sorption on all synthesized materials and the intraparticle diffusion is not the only one mechanism controlling the rate of Methyl Red sorptive removal. The parameters of equilibrium sorption of Methyl Red on organosilicas of MCM-41 type were calculated using Langmuir, Freundlich, Redlich-Peterson, and Brunauer-Emmett-Teller models. Sorption of acid dyes with geometry similar or substantially different from Methyl Red on mesoporous silicas was studied from single and binary component mixtures in aqueous solutions with pH 4.8 and 5.5. It was found that selective sorption process is highly dependent on the structural characteristics and protolytic state of silica surface as well as acid dye.     

抗生素化学合成生产废水可生化性改善试验研究

采用水解酸化与Fenton试剂分别处理高浓度抗生素化学合成废水的厌氧出水,并采用MBR验证其生化性的改善。试验表明:在废水ρ(COD)平均为4 084 mg/L时,水解酸化COD去除率平均为26.2%,ρ(BOD5)/ρ(COD)从0.23提高到0.31,但无法保证MBR出水ρ(COD)<120 mg/L。Fenton试剂反应条件为:ρ(H2O2)=5 000 mg/L,ρ(Fe2+)=4 000 mg/L,pH=7,反应时间1 h,COD去除率达50%。混合废水经MBR处理后,出水ρ(COD)平均为98.4 mg/L,可稳定达《制药工业水污染物排放标准》。     

Application of hinokitiol potassium salt for wood preservative

The decay of wood and other cellulosic materials by fungi cause significant economic loss. The widely used chromated copper arsenate was prohibited for the environmental impact and safety of arsenic and chromium. It was found that natural product hinokitiol (HK) had fungicidal and insecticidal activities, and its toxicity was bearable for the environment. We described the practical synthesis of HK-K salt. According to the GB/T18261-2000 and LY/T1283-1998, wood preservative performance of HK-K salt was tested. The results showed that the best inhibitory concentration of HK-K salt was 50 mg/L, for which the prevention effectiveness on mold is better, the killed value is between 0 and 1, and the corrosion-resistant for wood-rotting fungi is grade A.