残酸再利用工艺技术

针对油田酸化过程中返排出的残酸处理困难,造成较大污染、浪费等问题,分析了残酸作为调剖剂的价值,研究了利用“残酸”进行调剖的工艺技术,并进行了现场试验,投入产出比为1:28,取得了较好的经济效益和社会效益,为”残酸”的再利用和环境保护找到了一条有效途径。     

Surfactant-based oil dispersant toxicity to developing nauplii of Artemia: effects on ATPase enzymatic system

The paper deals with the toxicity of a surfactant-based oil dispersant to the ATPase activities of two naupliar stages of Artemia (instar I & II). Both instars were exposed to sub-lethal and lethal concentrations derived from acute toxicity data. The chosen concentrations were near to LOECs and NOECs. An eightfold difference indicated between the instars was instar-exposure time dependent. The most prominent effects were the inhibition and the stimulation of Na⁺/K⁺-ATPase and Mg²⁺-ATPase activities, respectively. The cause of these effects was related to the dispersant components, the surfactants. The pattern stimulation/inhibition of Mg²⁺-ATPase and Na⁺/K⁺-ATPase activities could be used to indicate toxic stress by surfactant-based oil dispersants since previous studies with other contaminants have shown different ATPase activity patterns.     

A model testing study for the transfer of radioactivity to fruit

This paper compares predictions of the foodchain model SPADE with experimental data for the transfer of (134)Cs and (85)Sr to strawberry plants following acute foliar and soil contamination. The transfer pathways considered in this exercise included direct deposition to fruit, leaf-to-fruit, soil-to-leaf and soil-to-fruit transfers. Following foliar contamination, the difference between predicted and measured radionuclide activity values varied between a factor of 0.5-10 for fruit and 4.5-7 for leaf. Following soil contamination, the difference between predicted and measured values varied between a factor of 3-74 for fruit and 32-44 for leaf. In all cases the difference between measured and predicted values was smaller for (85)Sr than (134)Cs. Measured and predicted activities were higher for leaf than fruit. Both measured and predicted (134)Cs concentrations in fruit and leaf are higher when deposition occurs at ripening than at anthesis. These results confirm the need for more data on fruit, even for Cs and Sr, to support models in predicting the transfer of radionuclides to fruit crops. Ongoing research projects funded by the UK Food Standards Agency aim to provide some data on radionuclide transfer to herbaceous, shrub and tree fruits, which will help improve radiological assessment models in order to provide better protection for consumers.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

REGIONAL DETECTION OF CHANGE IN WATER QUALITY VARIABLES1

ABSTRACT: The detection of change in a hydrologic varaible, particularly water quality, is a current problem. A method is presented for testing whether there has been a shift in the mean of a hydrologic variable based on the well established bivariate normal distribution theory. In this technique, the dependent, or target, and the independent, or control, variables are formed as weighted linear combinations of the mean values at a number of locations in a selected target and control area. The weighting factors are determined based on a mathematical programming technique which minimizes the conditional coefficient of variation thereby minimizing the number of observations required to detect a change of a preselected magnitude in the mean of the target area. The result is a situation where a savings in the number of observations required to detect a change is a consequence of adding more stations: the space-time tradeoff. Two applications of the technique are presented, the first using electrical conductivity (EC) data from two sets of river basins and the second using EC data from a set of basins as the target variable and annual discharge as the control. The results indicate that a significant savings in time can be achieved by using this method.     

Rehabilitation of a lowland river: Reconciling flood defence with habitat diversity and geomorphological sustainability

Geomorphologically appropriate rehabilitation measures were proposed to enhance the in-stream environment of the lowland River Idle, north Nottinghamshire, UK. However, the River Idle has multi-functional management requirements including those of flood defence so environmental enhancement must be pursued without significantly increasing the flood risk. Hydraulic testing of rehabilitation proposals is complicated because of the stringent assumptions about flow and morphology in ‘traditional’ hydraulic models. While new generation two- and three-dimension hydraulic models may overcome some of these problems, they are extremely data intensive, require advanced modelling capabilities and are, therefore, very expensive to apply. Also, they do not yet predict morphology-flow interactions adequately. As an alternative, several simple hydraulic models were applied to test the rehabilitation proposals, based on a fitness-for-purpose criterion.BENDFLOW was applied to fine tune the optimal siting of measures and to estimate the additional near-bank scour generated by proposed bend re-profiling. HMODEL2 and the FCFA method were used to test the impact on local channel conveyance capacities and HECRAS was applied to simulate the impact of the proposals on regional flood defence. Indicative results from the testing suggested a maximum increase in near-bank scour of 0·15 m in re-profiled bends, a loss of approximately 10% in flood conveyance locally due to deflector installation or reed and tree planting, and a 0·12 m increase in flood stage within the reach for a 15 year flood. The modelling results were acceptable to the management authority as an indication of an acceptable compromise between flood defence and conservation interests, and construction of the measures followed in 1996. It is clearly that it will require the results of post-project monitoring to indicate whether compromises made to the rehabilitation initiatives in order to satisfy flood defence requirements have unduly reduced their environmental enhancement potential but, for assessing the proposed methods, the models are recommended for use other lowland river environments.     

Stochastic Transfer Function Model and Neural Networks to Estimate Soil Moisture1

Abstract: A practical methodology is proposed to estimate the three‐dimensional variability of soil moisture based on a stochastic transfer function model, which is an approximation of the Richard’s equation. Satellite, radar and in situ observations are the major sources of information to develop a model that represents the dynamic water content in the soil. The soil‐moisture observations were collected from 17 stations located in Puerto Rico (PR), and a sequential quadratic programming algorithm was used to estimate the parameters of the transfer function (TF) at each station. Soil texture information, terrain elevation, vegetation index, surface temperature, and accumulated rainfall for every grid cell were input into a self‐organized artificial neural network to identify similarities on terrain spatial variability and to determine the TF that best resembles the properties of a particular grid point. Soil moisture observed at 20 cm depth, soil texture, and cumulative rainfall were also used to train a feedforward artificial neural network to estimate soil moisture at 5, 10, 50, and 100 cm depth. A validation procedure was implemented to measure the horizontal and vertical estimation accuracy of soil moisture. Validation results from spatial and temporal variation of volumetric water content (vwc) showed that the proposed algorithm estimated soil moisture with a root mean squared error (RMSE) of 2.31% vwc, and the vertical profile shows a RMSE of 2.50% vwc. The algorithm estimates soil moisture in an hourly basis at 1 km spatial resolution, and up to 1 m depth, and was successfully applied under PR climate conditions.     

超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。     

固定源细颗粒物稀释测试法现场应用存在问题及影响因素分析研究

对基于大气环境的稀释测试法在现场应用中存在的主要问题进行了归纳总结,并对若干影响细颗粒物测试结果的重要因素进行了分析,诸如停留时间、稀释比、采样时间等因素,期望能够对该法测试系统的后续改进或重新设计提供实际问题导向,同时也能够对该领域现场工作的科研人员提供非常有用的经验。