埕岛油田海底管道漏磁检测与安全评估

提出了埕岛油田海底管道内缺陷漏磁检测需解决的主要问题,研发了325 mm管道内缺陷漏磁检测装置,确定了海底管道漏磁检测工艺流程,配套了管道检测发射装置、接受装置等相关设施,实现了海底管道的漏磁检测、缺陷分析和安全评估。     

高含硫气田试气与地面工程建设交叉作业安全管理方法初探

普光气田作为高含硫气田在国内大规模开发,尚属首例,在气田开发过程中没有可借鉴的经验.高含硫气井试气作业中易发生井喷、硫化氢泄漏等事故.普光气田地面工程建设施工难度大、地形复杂,按照工程进度要求,试气作业和地面集输工程施工两项作业交叉时必须实现“安全作业、安全施工”,这是普光气田开发的基本目标.通过制订安全管理制度、明确责任主体、服从业主统一管理等有效的安全管理方法,保证了目标的实现,获得安全管理经验,对今后高含硫气田大规模开发具有指导意义.     

加强危险场所电气安全检测,提高化工企业本质安全水平

针对近年来化工企业电气安全、防静电等事故多发的现状,本文通过对化工企业电气安全、防静电等安全设施存在的问题进行分析,阐述了化工企业电气安全、防静电设施存在的主要缺陷,强调了利用技术支撑手段对在用安全设施进行检测检验对提高企业本质安全水平的重要性,并对如何做好电气安全、防静电等安全设施的检测工作提出了建议。     

Performance-based earthquake evaluation of a full-scale petrochemical piping system

Assessment of seismic vulnerability of industrial petrochemical and oil & gas piping systems can be performed, beyond analytical tools, through experimental testing as well. Along this line, this paper describes an experimental test campaign carried out on a full-scale piping system in order to assess its seismic behaviour. In particular, a typical industrial piping system, containing several critical components, such as elbows, a bolted flange joint and a Tee joint, was tested under different levels of realistic earthquake loading. They corresponded to serviceability and ultimate limit states for support structures as suggested by modern performance-based earthquake engineering standards. The so called hybrid simulation techniques namely, pseudo-dynamic and real time testing with dynamic substructuring, were adopted to perform seismic tests. Experimental results displayed a favourable performance of the piping system and its components; they remained below their yielding, allowable stress and allowable strain limits without any leakage even at the Near Collapse Limit State condition for the support structure. Moreover, the favourable comparison between experimental and numerical results, proved the validity of the proposed hybrid techniques alternative to shaking table tests.     

松散煤体渗流传热试验装置研制

为研究松散煤体低温氧化及通风供氧下的渗流传热规律,研发了渗流传热试验装置。试验装置由气体加湿系统、气体加热系统、煤样反应系统、数据采集系统和安全保护系统组成;本装置可实现自动加湿、控温、自动采集数据及处理数据。为解决装置使用和运行中的安全问题,设计了断电保护、有害气体检测等措施,保障试验装置的安全、可靠。     

Grazing as a measure against grass encroachment in Dutch dry dune grassland: effects on vegetation and soil

A grazing experiment was started in 1984 and 1989 respectively, in two parts of a dune grassland in the nature reserve ‘Zwanenwater’, North Holland; a third part with similar geology and topography was used as a control area and not grazed. An evaluation of the effects of grazing on vegetation patterns, species composition, vegetation structure and humus form was made with the help of vegetation maps from 1986 and 1992 as well as field surveys. Dense tall-grass communities dominated byAmmophila arenaria increased over the period 1986–1992 in the grazed areas, and especially in the non-grazed area (increase in area to 20%, 22% and 50%, respectively). Open communities decreased in the grazed areas, but are still prevalent, while in the ungrazed area they virtually disappeared, with the result that the present percentage areas are 53%, 38% and 17%. Field survey data were classified by TWINSPAN producing four vegetation types. These occur more or less equally in grazed and ungrazed areas, albeit with different percentage areas: (1) open vegetation dominated byCorynephorus canescens; (2) open vegetation characteized, byKoeleria macrantha; (3) heathland dominated byEmpetrum nigrum; and (4) tall-grass communities dominated byAmmophila arenaria. Within a vegetation type, species composition was only marginally affected by grazing regime. Within the open communities the number of species, vegetation height, vegetation cover and soil organic horizons were not affected by grazing. In the tall-grass communities the number of species was significantly larger and the height of the vegetation significantly lower in the area grazed since 1984. In the heathland community the number of species and cover of the moss layer were significantly higher in the 1984 area and ectorganic and endorganic horizons significantly thicker in the ungrazed area. It is suggested that these effects are the result of an increased availability of light, but possibly also of a decreased stock of organic matter and nutrients, due to a decreased input of litter and accelerated rates of decomposition.     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

省（区）自然资源综合评价研究：以山西省为例

本文以山西省为例,对省区自然资源进行了综合评价研究,分析了自然资源的相关结构,研究了各类资源的开发潜力,最后对自然资源的总体特征作了简要概括。     

大都市地下空间开拓与环境地质问题

城市地下空间是一种宝贵的资源，我国城市地下空间开发利用虽已取得较大的进展，然而由此所引发的环境地质问题仍然是令人担忧的。本文就大都市地下空间的开拓的作用及其引发的环境地质问题进行了深入的探讨，并提出了解决这些环境地质问题的相应途径。     

三维铝型材挤压模多参数优化

以一个导流组合模为例,利用神经网络建立模具参数的数学模型,用遗传算法对参数优化。其中由正交法设计得到实验样本,由软试模提取模具的SDV值,将其作为优化目标。最终实验结果与优化值吻合,为建立和控制挤压模参数提供了一种行之有效的手段。